How many times can the FSP be removed and reinstalled before issues with the taper pins or pin holes becomes a problem? I'm on my third time (don't ask) removing and reinstalling a BCM FSP. Thank you.
NC
How many times can the FSP be removed and reinstalled before issues with the taper pins or pin holes becomes a problem? I'm on my third time (don't ask) removing and reinstalling a BCM FSP. Thank you.
NC
It should be fine.
The taper pins can take up some clearance.
Black River Tactical
BRT OPTIMUM Hammer Forged Chrome Lined Barrels - 11.5", 12.5", 14.5", 16"
BRT EZTUNE Preset Gas Tubes - PISTOL, CAR, MID, RIFLE
BRT Bolt Carrier Groups M4A1, M16 CHROME
BRT Covert Comps 5.56, 6X, 7.62
I've seen demo guns that were probably taken apart a hundred times or more. They're fine so long as you DON'T drive 'em home to the point of stretching the holes.
BCM goes waaaaay overboard with the hammer on assembly.
Last edited by 17K; 09-10-17 at 20:58. Reason: Add DON'T
As long as they are tight when driven it, you are gtg.
"Never shoot a large caliber man with a small caliber projectile ".
Bookmarks