Results 1 to 5 of 5

Thread: Front Sight Post question

  1. #1
    Join Date
    Apr 2014
    Location
    Republic of Texas
    Posts
    633
    Feedback Score
    18 (100%)

    Front Sight Post question

    How many times can the FSP be removed and reinstalled before issues with the taper pins or pin holes becomes a problem? I'm on my third time (don't ask) removing and reinstalling a BCM FSP. Thank you.

    NC

  2. #2
    Join Date
    Nov 2010
    Location
    MI
    Posts
    3,516
    Feedback Score
    22 (100%)
    It should be fine.

    The taper pins can take up some clearance.
    Black River Tactical
    BRT OPTIMUM Hammer Forged Chrome Lined Barrels - 11.5", 12.5", 14.5", 16"
    BRT EZTUNE Preset Gas Tubes - PISTOL, CAR, MID, RIFLE
    BRT Bolt Carrier Groups M4A1, M16 CHROME
    BRT Covert Comps 5.56, 6X, 7.62

  3. #3
    Join Date
    Mar 2017
    Posts
    1,434
    Feedback Score
    7 (100%)
    I've seen demo guns that were probably taken apart a hundred times or more. They're fine so long as you DON'T drive 'em home to the point of stretching the holes.

    BCM goes waaaaay overboard with the hammer on assembly.
    Last edited by 17K; 09-10-17 at 20:58. Reason: Add DON'T

  4. #4
    Join Date
    Jul 2017
    Location
    Iowa
    Posts
    51
    Feedback Score
    0
    As long as they are tight when driven it, you are gtg.
    "Never shoot a large caliber man with a small caliber projectile ".

  5. #5
    Join Date
    Jun 2017
    Location
    In the bunker, near Area 51
    Posts
    249
    Feedback Score
    5 (100%)
    Quote Originally Posted by Tigwelder1971 View Post
    As long as they are tight when driven it, you are gtg.
    ^^^^ +1

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •