G&R Tactical
Results 1 to 5 of 5

Thread: Front Sight Post question

  1. #1
    Join Date
    Apr 2014
    Location
    Republic of Texas
    Posts
    306
    Feedback Score
    8 (100%)

    Front Sight Post question

    How many times can the FSP be removed and reinstalled before issues with the taper pins or pin holes becomes a problem? I'm on my third time (don't ask) removing and reinstalling a BCM FSP. Thank you.

    NC
    Only accurate rifles are interesting. - Whelen

  2. #2
    Join Date
    Nov 2010
    Location
    MI
    Posts
    1,962
    Feedback Score
    20 (100%)
    It should be fine.

    The taper pins can take up some clearance.
    Black River Tactical
    BRT OPTIMUM Barrels - 16" Light & SPR w/ BRT Extended Length Gas System
    BRT Covert Comp Flash Hiders 7.62 & 5.56
    BRT MicroPin Gas Blocks .750" & .625"
    BRT MarkBlue Gas Tubes
    BRT CustomTune Gas Ports
    BRT MicroTune Gas Blocks

  3. #3
    Join Date
    Mar 2017
    Posts
    57
    Feedback Score
    0
    I've seen demo guns that were probably taken apart a hundred times or more. They're fine so long as you DON'T drive 'em home to the point of stretching the holes.

    BCM goes waaaaay overboard with the hammer on assembly.
    Last edited by 17K; 09-10-17 at 20:58. Reason: Add DON'T

  4. #4
    Join Date
    Jul 2017
    Location
    Iowa
    Posts
    25
    Feedback Score
    0
    As long as they are tight when driven it, you are gtg.
    "Never shoot a large caliber man with a small caliber projectile ".

  5. #5
    Join Date
    Jun 2017
    Location
    In the bunker, near Area 51
    Posts
    45
    Feedback Score
    1 (100%)
    Quote Originally Posted by Tigwelder1971 View Post
    As long as they are tight when driven it, you are gtg.
    ^^^^ +1

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •