G&R Tactical
Page 15 of 15 FirstFirst ... 5131415
Results 141 to 145 of 145

Thread: S&W Revolver Thread

  1. #141
    Join Date
    Sep 2009
    Location
    Barre, VT
    Posts
    6,934
    Feedback Score
    92 (100%)
    Quote Originally Posted by flenna View Post
    I am not familiar with the moon clips for the 586 but I have used them for my 940 for almost 25 years with no problems. What kind of issue are you having with them?
    Loading the shells into the clip. When Iím down to the last one I canít get it to slide in. I even tried tapping with a plastic hammer. I bent them taking the rounds out.


    Sent from my iPad using Tapatalk
    "Real men have always needed to know what time it is so they are at the airfield on time, pumping rounds into savages at the right time, etc. Being able to see such in the dark while light weights were comfy in bed without using a light required luminous material." -Originally Posted by ramairthree

  2. #142
    Join Date
    Oct 2015
    Location
    The Sticks, TN
    Posts
    503
    Feedback Score
    1 (100%)
    Quote Originally Posted by usmcvet View Post
    Loading the shells into the clip. When I’m down to the last one I can’t get it to slide in. I even tried tapping with a plastic hammer. I bent them taking the rounds out.


    Sent from my iPad using Tapatalk
    Snapping them in was not an issue, but the 9mm being rimless has that groove at the bottom of the case that makes it easier to snap into the clip. Removing was difficult and the easiest way I found to remove them was to use a small screwdriver. Insert the screwdriver into the case, pinch the case between the screwdriver and your thumb as you hold it, pull it away from the clip and it will pop straight out without bending it.
    Psalm 34:19

  3. #143
    Join Date
    Sep 2009
    Location
    Barre, VT
    Posts
    6,934
    Feedback Score
    92 (100%)
    Quote Originally Posted by flenna View Post
    Snapping them in was not an issue, but the 9mm being rimless has that groove at the bottom of the case that makes it easier to snap into the clip. Removing was difficult and the easiest way I found to remove them was to use a small screwdriver. Insert the screwdriver into the case, pinch the case between the screwdriver and your thumb as you hold it, pull it away from the clip and it will pop straight out without bending it.
    Thanks. Another suggestion I had was a wooden dowel.


    Sent from my iPad using Tapatalk
    "Real men have always needed to know what time it is so they are at the airfield on time, pumping rounds into savages at the right time, etc. Being able to see such in the dark while light weights were comfy in bed without using a light required luminous material." -Originally Posted by ramairthree

  4. #144
    Join Date
    Oct 2015
    Location
    The Sticks, TN
    Posts
    503
    Feedback Score
    1 (100%)
    Quote Originally Posted by usmcvet View Post
    Thanks. Another suggestion I had was a wooden dowel.


    Sent from my iPad using Tapatalk
    That's probably a better idea. I've always kept a small screwdriver in my range bag so it is what I had.
    Psalm 34:19

  5. #145
    Join Date
    Sep 2009
    Location
    Barre, VT
    Posts
    6,934
    Feedback Score
    92 (100%)

    S&W Revolver Thread

    I tried installing a set of compact grips on my Model 64. The screw is too long!



    I put the wood grips from my 586 on the .38 and put on the rubber grips it came with on the 586.




    I need to do something with the sights. I might just need a rear white outline or add some color to the ramp.



    Sent from my iPhone using Tapatalk
    Last edited by usmcvet; 04-03-18 at 22:41.
    "Real men have always needed to know what time it is so they are at the airfield on time, pumping rounds into savages at the right time, etc. Being able to see such in the dark while light weights were comfy in bed without using a light required luminous material." -Originally Posted by ramairthree

Page 15 of 15 FirstFirst ... 5131415

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •