-
Trijicon RMR base blueprint CAD request...
I'm going to try and make a riser plate for a RMR to be used with my VP9 slide. With supressor sights, the RMR as-is uses an absolute co-witness. I'd like to make that a lower 1/3. A .125" riser plate would get me there.
I tried to find a reference online with no luck. Does anyone have or can post a link to a RMR drawing with dimensions?
-
Don't know about a CAD drawing, but UTM makes shims for RMR. While it might not be what you're looking for, it may give you a template for development.
https://www.umtactical.com/store/p33...jicon_RMR.html
https://www.amazon.com/TACTICAL-Delr.../dp/B073K2T4NZ
-
If he is capable of making it he should be capable of measuring what he has. Problem with a shims... If he stacks them high enough to get .125 he will loose the purpose of the location pins.
Last edited by GH41; 12-10-17 at 16:10.
-
I was looking for something simple to throw into a CAD program for a 3D printer to prototype.
I did find one, and in case anyone is wonder the front edge of an RMR has a 3" radius.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks