Originally Posted by
m4brian
Roger - the trigger bar spring is in the thread. When I have the whole deal out, I take the spring OUT and also polish it at the sharp end - no need for sharp edges in a gun. My GUESS is that you could follow the polishing regimen and have a good DA and leave all stock. I have not done that, but wouldn't mind doing it as an experiment. (Again, the trigger bar and mainspring strut alone can be crude enough to ruin a trigger in DA on these guns).
Replacing the trigger return spring is almost essential in these guns anyway. The CGW spring is lighter and lasts 2-3 times longer.
If you want to run a lighter DA, you need to replace the firing pin with the longer Cajun one. Also good at that point to replace the plunger and FP spring.
You should then get the 15 AND 18 LB springs for the mainspring because the 15 MAY not light the hardest primers. I personally think that the 15 is good for ANY carry/defense ammo you would use.
That is why I generally get the Short Rest Kit (comes WITH the extended FP, better roll pin, with plunger spring and FP spring) as well as some very nicely made parts to shorten reset (not essential). I also get the 15/18 LB springs, AND the CGW sear springs which are better because they make the sear engagement more positive.
But the urban grey on this frame is 'sick' as they say. It is truly a cool color. Also, I am finding the tall sights fine for general use - need to do more shooting though. the extended mags are also a nice contrast and change the feel of the grip. Excellent gun.
Bookmarks