Originally Posted by
tigershilone
The pics of the baffles are after approx 1200 rounds, 22 is really dirty.
The tri-wing tool scrapes the barrel of the baffle out quickly and the cone portion gets the bottom coned area the tri-wing misses. The two big alum cylinders hold the click baffles preventing damage or dents during dis-assembly or cleaning.
I used to do the SS pin tumble clean, but that took forever. This is much easier and quicker.
I also coat every internal part with silver hi-temp anti-seize (made for SS, aluminum should use copper based anti-seize) and that helps a lot too, big chunks just break off the surfaces easily.
Bookmarks