Length of Pull on 6-Position Stock

[Kiwigunguy]

I was wondering if someone could give me some measurements for the standard milspec 6-position stock. I need to know the length of pull(distance from the face of the trigger to the butt) for each of the six positions. I have searched fairly extensively online and so far I haven't been able to find that information anywhere.

[zebra20zebra20]

Whatever you're comfortable with!

[Kiwigunguy]

Whatever you're comfortable with!

I asked for the measurements, preferably in inches. How exactly is that statement supposed to help me?

[26 Inf]

From Magpul:

MOE Carbine Stock, Mil-Spec:

LOP Adjustment Range: 3.3 in.
LOP, M4 Collapsed: ~10.5 in.
LOP, M4 Extended: ~13.8 in


The index holes on the stock are evenly spaced, you should be able to extrapolate.

[Kiwigunguy]

From Magpul:

MOE Carbine Stock, Mil-Spec:

LOP Adjustment Range: 3.3 in.
LOP, M4 Collapsed: ~10.5 in.
LOP, M4 Extended: ~13.8 in


The index holes on the stock are evenly spaced, you should be able to extrapolate.

Thanks. Is the Magpul MOE identical in dimensions to the standard mil-spec stock?
I had seen those figures before but wasn't sure if they carried over.
A lot of aftermarket stocks have different dimensions.

[militarymoron]

kiwigunguy, explain why you're looking for these measurements. It may help get the answers you want.

[grizzman]

Position 6 - 13 1/8"
Position 5 - 12 3/8"
Position 4 - 11 3/4"
Position 3 - 11 1/8"
Position 2 - 10 1/2"
Position 1 - 9 5/8"

These are with a Colt stock and BCM 6 position receiver extension. Measurement is straight back from the trigger.

[Kiwigunguy]

Position 6 - 13 1/8"
Position 5 - 12 3/8"
Position 4 - 11 3/4"
Position 3 - 11 1/8"
Position 2 - 10 1/2"
Position 1 - 9 5/8"

These are with a Colt stock and BCM 6 position receiver extension. Measurement is straight back from the trigger.

Wow. That's much shorter than I expected. Very different from the Magpul MOE measurements. Thanks for the help.

[MistWolf]

Actual LOP will vary according what stock is used.

In most jurisdictions, it's the OAL that matters, not LOP.

[grizzman]

I will say that if I were forced to pin an adjustable stock, it sure wouldn't be a standard M4 one.

I had to remove mine from a drawer, and I went right back into it when I was done.