G&R Tactical
Results 1 to 3 of 3

Thread: Advice for 6 creed build

  1. #1
    Join Date
    Oct 2010
    Location
    GA
    Posts
    65
    Feedback Score
    2 (100%)

    Advice for 6 creed build

    I’m gathering parts for a large frame build. I’ve put together a couple of ARs, but all have been 556.

    I’ve got Aero upper and lower and a Brownells branded barrel I decided to give a try.

    I want to use a rifle length buffer system either with an A2 or a magpul rifle stock.

    No suppressor.

    Any advice on buffer, spring, bcg, etc???

    Thanks
    Last edited by MitchK; 04-30-18 at 12:40.

  2. #2
    Join Date
    Apr 2009
    Location
    Dallas, TX
    Posts
    2,126
    Feedback Score
    2 (100%)
    im running all the JP LMOS stuff in my 6.5 creed.

    Whatever you run, run a high pressure bolt.

  3. #3
    Join Date
    May 2008
    Location
    Colorado
    Posts
    10,084
    Feedback Score
    0
    I don't know what others think, but to me the AR10 platform isn't as dialed in as much as the ar15 platform, and 6CM is one of the less dialed in ones. From playing with my LMT-MWS and buffer and springs, I'd want an adjustable gas block so that you have all the variables to play with.

    Per Rjacobs post, watch LowLights review of the JP in 6.5CM. I have a 223 with the LMOS and adjustable gas block. That is a pretty sweet engineering set up.
    Last edited by FromMyColdDeadHand; 04-30-18 at 12:54.
    I just did two lines of powdered wig powder, cranked up some Lee Greenwood, and recited the BoR. - Outlander Systems

    I'm a professional WAGer - WillBrink /// "Comey is a smarmy, self righteous mix of J. Edgar Hoover and a gay Lurch from the "Adams Family"." -Averageman

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •