I mentioned the method in this thread. > https://www.ar15.com/forums/AR-15/Ne...-it-/4-770624/
If you scroll all the way down, samuse has a picture of how the barrel should be placed in the vise using barrel blocks. It's really the best method.
Last edited by 556Cliff; 03-11-22 at 09:36.
Easy button: https://www.amazon.com/Wheeler-Tacti.../dp/B07792P951
All you need is a vice and it will press the pins loose, which you can then punch out easily.
“You have made us for yourself, O Lord, and our heart is restless until it rests in you.” -Augustine
He describes it here, I've done it multiple times and it works like a charm. I just removed a BCM FSB a couple of weeks ago to replace the Magpul MOE handguard with a Centurion Mlok C4 FSB handguard, not a single hitch.
Remove and reinstall front sight?
Gettin' down innagrass.
Let's Go Brandon!
Thank you both georgeib and ToR for the replies!
-Rainman
That's the thread I originally read when I was trying to remove my BCM FSB. It didn't work for me because I think I got one that was a bit "extra." Even after removing the pins and trying to press them back in (the same slots they came out of, and in the correct orientation), I haven't been able to get them all the way in.
You got it, man! Let us know how it works out for you.
“You have made us for yourself, O Lord, and our heart is restless until it rests in you.” -Augustine
I have used the Triarc easy pin gas block a couple of times. Super easy and then I dont need to send anything off and wait.
"A government big enough to give you everything you want, is big enough to take away everything you have."
Thomas Jefferson
Bookmarks