IWB holster suggestions

[Icculus]

Hi guys. I'm currently in the market for an IWB holster and as I've ever only owned OWB rigs, looking for some assistance. I've been looking at a few models and I'm thinking the hybrid's might be the way to go for me. Hold open for easier re-holstering (maybe not the biggest deal) and the half kydex makes them seem a bit thinner overall but with the leather backing for some comfort. Anyone have good experiences with hybrids or want to point out some glaring flaws I should look out for? Those of you who have worn both all leather and hybrids can you point out pros/cons or what you like more about 1 or the other.

Currently I've been looking at these 2
http://www.comp-tac.com/product_info.php?products_id=95

http://www.bluegrasshybridholsters.c...hk=1&Itemid=53

Also I've looked at the Milt Sparks VM2 and like them but I just don't want to wait 26 weeks.
Any other suggestions of ones I should look at would be welcome. Thanks.

And if it matters I'm bigger guy--6'2" about 250lbs. (but working my way down) and the holster will be for P229 (no rail).

EDIT: Sorry if this is in the wrong section. Mods please move if it needs to go in Tactical Gear or another forum.

[Business_Casual]

Once it is inside your waistband there is little else to worry about, IMO. I have used the C-Tac for years (and right now) and the only thing I did was replace a clip once.

My advice would be to go with the most narrow/least real estate Kydex and worry more about a really, really good belt and the trouser's fit. The IWB holster is more of a gun bucket.

M_P

[Zhurdan]

I use the Kirkpatrick Hidden Defense Holster. It's similar to the Versamax2 in that it offsets the belt loops to help keep the bulk down. The two that I have (Glock and 1911) work wonderfully. Nice, thick leather, good hand worked molding, reinforced mouth for easy reholstering, and a high sweat guard on the inside. I wouldn't do any backflips or anything, but it'll keep 'em put during some light running and jostling. A bit cheaper than others I've seen as well. (~$80.00)

[Rinspeed]

The Sparks Summer Special works very well for me. If you don't want to wait Galco makes a pretty good off the shelf holster. Their version of the SS is called the Summer Comfort.

[Bob Reed]

Hello,

Rusty Sherrick's Rangemaster Thinman, shown at the bottom of the page via. the following link, is probally the least bulkest of all the IWB Holsters.

http://www.c-rusty.com/pages/holsters/insidewb.html

[decodeddiesel]

I find with IWB thinner is deffiniately better. m_p is right, the IWB is basically a gun pocket which you add to your pants.

That said I find more and more I prefer Kydex for my guns. I have used and can suggest the Custom Carry Concepts "Looper", the Comp-tac "MTAC" and "CTAC", and the Raven Concealment "Phantom".

Leather holsters are nice and many prefer them for all steel guns such as the Browning High Power and 1911. The Milt Sparks Versa-Max II is probably the industry standard, with the Milt Sparks Summer Special also being a good choice. There are many other leather holsters out there, I am really not that "in the know" on the subject. I just know these are regarded as the best.

[DBake]

Once it is inside your waistband there is little else to worry about, IMO. I have used the C-Tac for years (and right now) and the only thing I did was replace a clip once.

My advice would be to go with the most narrow/least real estate Kydex and worry more about a really, really good belt and the trouser's fit. The IWB holster is more of a gun bucket.

M_P

I agree with was M_P said, that why I use a cheapo, Uncle Mikes IWB. Hasn't let me down at all.

[woodandsteel]

Currently I've been looking at these 2
http://www.comp-tac.com/product_info.php?products_id=95

This is the holster that I use for my glock 23. It's the holster that I am always recommending. It holds the gun secure to my body. I have no problem with the firearm printing.(provided I dress appropriately) And with the tension screws, I can adjust how secure the holster holds the firearm and can also adjust how it rides on my belt. Talking about belts, make sure you have a sturdy one. It can make all the difference in how well the holster rides.

Good luck!

[Icculus]

Thanks guys. I'm checking out some of the ones you've suggested. One of the reviews I was reading made an interesting comment. I'm going to use it to make a broad generalization about kydex (or hybrid) holsters vs. all leather and then let you guys correct me They were comparing an mtac and a vm2. The user basically said the mtac "felt more concealable" basically I believe referring to how the thinner profile allowed by the kydex made the holster seem closer to his body and less bulky. He commented though that the VM2 was more comfortable, especially when seated in the car.

Is this kinda the general consensus on leather vs kydex. I'm definitely concerned with the in the car part. I don't want to have to constantly feel like I have to remove the holster when getting in just to be comfortable.

This is the holster that I use for my glock 23. It's the holster that I am always recommending. It holds the gun secure to my body. I have no problem with the firearm printing.(provided I dress appropriately) And with the tension screws, I can adjust how secure the holster holds the firearm and can also adjust how it rides on my belt. Talking about belts, make sure you have a sturdy one. It can make all the difference in how well the holster rides.

Good luck!

woodandsteel how do you like your mtac when in the car? And on the belt, I'm upgrading that too and going to be ordering a new one from The Belt Man

Keep the suggestions coming, thanks everyone.

[decodeddiesel]

woodandsteel how do you like your mtac when in the car? And on the belt, I'm upgrading that too and going to be ordering a new one from The Belt Man

I have worn an MTAC with my M&P9c frequently over the past few months so I will comment. I tend to push the holster pretty far forward on my hip so it's almost at 2:30 or so. I do this so I can use an un-tucked T-shirt as my concealment garment. I find sitting in the car to be very comfortable, even for long trips with this set-up. I prefer the MTAC to the Looper when I am going to be driving, or in and out of my car for extended periods.