Results 1 to 2 of 2

Thread: 7.63 Micro-Whisper As a PDW Cartridge?

  1. #1
    Join Date
    Jan 2009
    Posts
    1
    Feedback Score
    0

    7.63 Micro-Whisper As a PDW Cartridge?

    Cartridges of the World (11th Edition) says that SSK Industries’ 7.63 mm Mini-Whisper is based on a .30 Mauser case modified to use .30-caliber rifle bullets. The loading data lists one load as capable of 1,742 feet per second with a 110-grain bullet from a 7-inch barrel.

    Could this be a viable PDW cartridge? With the right bullet design, it might offer terminal ballistics similar to those of a good .30 Carbine load. It also should offer a better trajectory than the 9 mm, and superior potential against light cover than the 5.7 mm and 4.6 mm PDW cartridges. Also, it should produce much less muzzle blast than the 5.56 x 45, 6.8 x 43, or 7 x 46 cartridges fired from very short barrels.

    Has anyone considered this role for this cartridge? Are the advantages I’ve listed significant enough to make this approach worthwhile? Or would it be better using a 6.8 x 43 or 7 x 46 carbine with a 10- or 12-inch barrel for the PDW role, accepting the compromises of greater blast and a bulkier weapon and ammunition?

  2. #2
    Join Date
    May 2007
    Location
    N. Georgia, USSA
    Posts
    1,143
    Feedback Score
    3 (100%)
    I've always wanted to do a 6mm Whisper AR upper with a 8" barrel. It seems to be similar to the cartridge in the KAC PDW.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •