Things to look for on a Beretta 92

[mattpittinger]

I am about to purchase a Beretta 92 that is a police trade in. I know police trade ins generally have a low round count, but I still want to lean to the side of caution. It is my understanding that high round count 92s tend to have issues. What parts do I need to keep an eye on? What parts should I just replace from the start?

[ThirdWatcher]

For me to consider buying a police trade-in Beretta 92, it would have to look pretty new. Not all trade-ins have low round counts. I carried a department-issued 92 for close to ten years and it wasn't worth (to me) what they wanted for it when we traded them in.

The areas I've seen problems crop up are trigger springs and locking blocks. There have been cases of slides cracking in the area of the locking block. Wolff Gunsprings makes an INS Gunspring of a different design that doesn't fail. There are several generations of improved locking blocks now and replacing one is an easy fix.

New Beretta 92s go for under $600, so an used one would have to be in pristine condition and have a great price before I would consider buying it.

Just my $0.02

[mattpittinger]

I just got a shot to buy one for $449.85, brand NIB with three 15 rounders. I think I am gonna jump on that. Thanks for the input.

[ToddG]

Do the forward edges of the locking block mate properly with the corresponding cutouts in the slide (no light showing)?

Any visible cracks in the dustcover area or in the thin aluminum support enclosed by the right grip panel?

All the normal stuff -- signs of unusual or excessive rail wear, kitchen table gunsmithing, etc.

If you purchase it, my advice is to replace the recoil spring and trigger spring immediately regardless of perceived condition. I'd also consider replacing the locking block unless you're confident the gun has less than 5,000 rounds through it.

[JonInWA]

I'd also as a matter of course immediately replace all of the magazine springs (and concurrently clean the inside of the magazine tube, which has probably rarely, if ever been done).

Best, Jon

[mattpittinger]

Since I have decided to go with a new one. What would you suggest as preventative maintenance, outside of the usual stuff.