Page 2 of 9 FirstFirst 1234 ... LastLast
Results 11 to 20 of 90

Thread: Easy way to zero your rifle

  1. #11
    Join Date
    Jul 2009
    Posts
    38
    Feedback Score
    0
    Quote Originally Posted by nickdrak View Post
    That looks like a knock-off mod of the Helwink/Chudwin 25yd sight-in/100rd Zero Target:
    http://www.lawofficer.com/Images/100...m22-158738.pdf
    So are the numbers on the target a MOA for windage and elevation? Why is the elevation ones so much farther apart than the windage?

  2. #12
    Join Date
    Jun 2006
    Posts
    4,640
    Feedback Score
    22 (100%)
    Just remember to always verify at 100 afterwards or when you can.
    GET IN YOUR BUBBLE!

  3. #13
    Join Date
    Jun 2006
    Location
    CONUS
    Posts
    4,201
    Feedback Score
    6 (100%)
    Quote Originally Posted by jcamp View Post
    So are the numbers on the target a MOA for windage and elevation? Why is the elevation ones so much farther apart than the windage?
    looks like number of clicks to adjust POI to me. front sight post clicks for elevation (approx 1/2" @25m per click) and rear sight windage knob clicks for windage (approx 3/16" per click @ 25m).

  4. #14
    Join Date
    Feb 2009
    Posts
    152
    Feedback Score
    1 (100%)
    is this still available somewhere? the links are working....

    Also, is there a 200 yd zero version of this?

  5. #15
    Join Date
    May 2010
    Posts
    39
    Feedback Score
    1 (100%)
    I've never seen that before. Looks pretty good. I may have to try it out soon!

  6. #16
    Join Date
    Jan 2008
    Location
    MO
    Posts
    636
    Feedback Score
    2 (100%)
    Quote Originally Posted by Wilco View Post
    is this still available somewhere? the links are working....

    Also, is there a 200 yd zero version of this?
    http://www.mcgeedigitalmedia.com/arf...zerotarget.pdf


    For 200 yards, you want your POA/POI to be the same at 50 yards. Impact should be about an inch and a half high at 100 yards then back to near 0 at 200 yards.

  7. #17
    Join Date
    Dec 2009
    Location
    Pittsburgh, PA
    Posts
    2,050
    Feedback Score
    17 (100%)
    Quote Originally Posted by Failure2Stop View Post
    I support any method that gets people to understand that POA/POI at 25 is not an acceptable method of expedient zeroing.
    Exactly. I would think people could understand holdover and used a gridded target, but if they get it this way, they are still getting it and that is all that matters.

  8. #18
    Join Date
    Nov 2008
    Location
    NC
    Posts
    70
    Feedback Score
    4 (100%)
    Hate to admit it, but it took me a little while to think this through and understand. finally got it, but kept wondering - if its hitting low at 25, wouldn't it hit even lower at 100? Very cool - Thanks for the heads up - I'll be printing it.

  9. #19
    Join Date
    Dec 2009
    Location
    Pittsburgh, PA
    Posts
    2,050
    Feedback Score
    17 (100%)
    Quote Originally Posted by ruddyhair View Post
    Hate to admit it, but it took me a little while to think this through and understand. finally got it, but kept wondering - if its hitting low at 25, wouldn't it hit even lower at 100? Very cool - Thanks for the heads up - I'll be printing it.
    Negative, the bullet is still going up at 50 yards. See the image below:


  10. #20
    Join Date
    Nov 2008
    Location
    NC
    Posts
    70
    Feedback Score
    4 (100%)
    gotcha - thanks

Page 2 of 9 FirstFirst 1234 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •