-
S&W 442 problem
While dryfiring my 442 today I noticed that something strange was happening. When canting the gun to the left, right-handed shooter shooting strong hand only, occasionally the cylinder would not lock before the hammer dropped. If I touched the cylinder it would click into place, but if I carefully grab the cylinder, I am able to move it clockwise. This only happens with the gun canted slightly to the left. The gun has about 500 rounds through it, mostly standard pressure, and about 50 rounds of Speer 135gr +p. I'm guessing this needs to go to back to Smith. Thanks in advance.
-
It probably needs a slightly longer hand. You can send it to S&W or any reputable gunsmith that understands S&W revolvers can fix it up if by ordering an oversized hand and fitting it up to give a solid, well timed carry up.
The S&W hand ejector lockwork has not changed much in 113 years.
-
I definetely wouldn't suggest shooting it under those circumstances, send it back to S&W - they'll take care of ya.
-
Call S&W customer service and explain the problem. If you're the original owner(heck, even if your not), ask for a shipping label. A S&W revolver that I bought new 12 yrs ago had a problem with the cyclinder sometimes being a little difficult to open(the ejecter rod wasn't loose). They sent me a shipping label(FedEx) and returned the gun to me inside of 10 days. Of course, no charge. S&W always gives me good customer service.
Last edited by rickb210; 09-20-09 at 11:25.
-
I definitely would not fire it. It could start spitting lead sideways.
-
Thanks for the help, will give S&W a call later today.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks