Precision AR Build - Pics

[Nitrox]

This is an AR I put together last year but thought I'd post it anyway.

Specs:

-18" CM Badger 1:8 twist cut and chambered by Norther Compeition - Heavy flutes, chryo, shot peened, deep blued (KG coated by myself)
-Ameetec/LAR receivers
-Colt bolt and carrier
-Geiselle Trigger
-LMT receiver extension and SOPMOD stock
-AAC Buffer w/standard carbine buffer spring
-DD 12.0 M4 Rail
-PRI Gas Buster and gas block
-Magpull MIAD grip and curved trigger guard
-OPS INC SPR Brake and collar
-OPS INC 15th model suppressor (not pictured)
-Leupold 3.5X10X40 LR/T
-Larue SPR mount w/10 MOA
-Harris BRMS w/ ARMS mount













I don't have any targets to post so I'll just says it shoots well and leave it at that.

[bigbore]

The 15th will balance it nicely, good choice.

[Nitrox]

.....

[Nitrox]

.....

[M4arc]

Very nice build Nitrox!

Clean and effective.

[CapnCrunch]

That's a well thought out build. I especially dig the barrel choice.

[DevilDog]

Very nice Nitrox - looks good.

I am interested to know what do you have the trigger at?

.. and what do you typically feed it?

[Nitrox]

Not sure what you mean with the trigger but it is a fixed single stage that measured close to 3.5 pounds.

I feed it hand loads. 77gr Nosler, BH cases, Fed 205M primers, 23gr Varget.

[DevilDog]

...close to 3.5 pounds.

That's what I meant! Thanks.

Good load, I've had a lot of success with Varget and heavy bullets (68 to 80) whether they be Hornady, Sierra, Berger or Nosler - it seems to be one of those loads that most quality ARs like.

[Nitrox]

I would use the VLD or 75 gr AMAX but they don't fit in mags so they sit in the box they came in.