Results 1 to 10 of 12

Thread: Question about ejector springs

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2007
    Posts
    622
    Feedback Score
    6 (100%)

    Question about ejector springs

    One of my M4 style AR's occasionally gets stovepipe jams. I thought the bolt was closing too fast or the extractor was letting go too soon, so I've upgraded to a black spring insert, and just added a heavy buffer.

    But I noticed something odd when I tried to upgrade to the heavy extractor springs from Tactical Springs. The extractor grips the case so tightly, that the ejector can't pop it out when I pull back on the charging handle to open the bolt! Maybe it would eject when firing, but I haven't tried it yet.

    I have another carbine, and with the same extractor spring, the case will eject when the bolt is opened.

    So, do I have a weak ejector or bad ejector pin on the one that "sticks"? Or might it be something more problematic like a bad bolt head recess...

  2. #2
    Join Date
    Apr 2009
    Posts
    2,851
    Feedback Score
    7 (100%)
    Try a BCM extractor upgrade kit. Can't hurt, good product, and cheap. May be the easiest fix, or quickest way to rule out these as probs.

  3. #3
    Join Date
    Oct 2007
    Posts
    278
    Feedback Score
    11 (100%)
    I've had good luck with the David Tubb / Superior Shooting Systems ejector and extractor replacement springs.

  4. #4
    Join Date
    Jun 2006
    Posts
    1,100
    Feedback Score
    0
    You could have a weak ejector spring, it’s a possibility. Another possibility is firing residue or brass shavings that have migrated into the ejector pocket of the bolt.

    A quick check would be to take a pin punch or similar object, and try to depress the ejector. You’re looking for smoothness of travel and a positive return. Should the ejector stick at any point or feel rough, you might want to disassemble, clean, inspect, lube, then reassemble the ejector assembly.

    I think one often times over looked lube point on the AR, is the ejector and spring. The -10 Operators Manual calls for placing one drop of lube on the ejector, and working the ejector in and out to allow the lube to work its way into the ejector pocket.
    “A leader is best when people barely know he exists, when his work is done, his aim fulfilled, they will say: we did it ourselves.” -Lao Tzu


    http://quibphotography.com/

  5. #5
    Join Date
    May 2009
    Posts
    35
    Feedback Score
    0
    I've run AR's in various forms for quite a few years, work, play, 3 gun etc. Through all of that experience, I never payed much attention to ejectors, had never taken one apart, etc. Fast forward to a few months ago and I started noticing that my brass was landing at my feet and I was occasionally having FTEs with a previously 100% LMT MRP. I did a hasty cleaning, same problem. Fortunately somebody smarter than me pulled my bolt, showed me how to disassemble the ejector and clean it up. I was horrified at how many brass shavings were in the tube and spring. Blasted it out with carb cleaner, reassembles with a heavy dose of oil and I was back in business. Learn something new everyday. Look at where your brass is landing, if its landing at your feet, you may have an ejector problem, worn/dirty, etc-Norcal911

  6. #6
    Join Date
    Jan 2009
    Location
    Barrington, IL
    Posts
    111
    Feedback Score
    0
    Take a round, spent or live, hold the assembled bolt in your hand, hook the round on the extractor and rock the round over, depressing the ejector. It should have stiff resistance and not bind up in its travel. I always put a drop of oil on the bolt face and do this when I am done cleaning an AR. It works the oil into the ejector. It's not a bad idea to take the ejector apart every 5,000 rounds or so to clean it, but most people never do and don't have problems.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •