Results 1 to 10 of 29

Thread: .260 Remington and the AR10

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2006
    Location
    South Jersey
    Posts
    36
    Feedback Score
    0

    .260 Remington and the AR10

    Just finished reading an article about the new DPMS LR in .260 Remington. Although the rifle was the prototype, the review showed promise of this cartridge used in this platform. Since the .260 is based on the 08 family, conversion for the AR10 would only require a barrel swap. Really like the idea of shooting the high BC 6.5mm bullets. Brass is readily available too.

    Wonder if John Noveske has the time to make me another barrel as the .243 Winchester barrel he made is a 1/2 moa shooter with 107 gr SMK @ 2950 FPS 10 feet from the muzzle.

  2. #2
    Join Date
    Jun 2006
    Location
    12S VA 868 817 (NAD83)
    Posts
    1,502
    Feedback Score
    0
    The 260Rem is an interesting round...

    I remember it was introduced about 15 years ago, the community had talked a lot about variants of the 308... naturally the 6mm version did extremely well and it was a smart move by Winchester to not go with the original name!

    There were a lot of folks that swore if a major name came out with a 6.5-08 it would take over the market -- obviously, it did not.

    Names of cartridges are really a bigger deal than a lot of folks think about... the 7-08 did well, but does not enjoy the fame of its siblings on either side. For a long time, manufacturers have been scared of metric names for US cartridges, the American shooters seem to not warm up to the so well -- I have said for many years that if JC had named it the 400 Magnum, it would be one of the most popular pistol cartridges around.

    So, the 260 is the 260... but I wonder if it would have not done better with a metric name? Many shooters know the 6.5 and want one... but Remmy has played the "name game" before with okay results: 280 Rem --> 7mm Rem Express --> 280 Rem

    In any case, the 260 is a great cartridge with outstanding ballistics. I for one hope to see it in use more and more...
    I put the "Amateur" in Amateur Radio...

  3. #3
    Join Date
    Jul 2006
    Location
    South Jersey
    Posts
    36
    Feedback Score
    0
    I call John and asked about the availability of a .260 Remington barrel for the AR10. He said hopefullly by year's end. He is pretty much swamped with orders right now with his existing catalog. Oh well, I guess it would make one hell of a Christmas gift!

    In the meantime, I was thinking about have a .260 Remington barrel made for one of my Savages. However, I really do not think I will gain anything over my 7mm WSM Savage that is long-throated especially for the Berger 180 gr VLD which has a BC of .698. Talk about shooting a laser beam from a bolt gun.........

  4. #4
    Join Date
    Dec 2006
    Posts
    6
    Feedback Score
    0
    Quote Originally Posted by 223Rem
    In the meantime, I was thinking about have a .260 Remington barrel made for one of my Savages.
    Numrich has Savage barrels in 260 Remington right now for $135. It got one, and it looks great. It will be a while until I am able to install it though.

  5. #5
    Join Date
    Jul 2006
    Location
    South Jersey
    Posts
    36
    Feedback Score
    0
    Quote Originally Posted by AR-180
    Numrich has Savage barrels in 260 Remington right now for $135. It got one, and it looks great. It will be a while until I am able to install it though.
    YO ! Thanks for the heads up......surfing over there right now.

  6. #6
    Join Date
    Nov 2006
    Location
    Montana/OCONUS
    Posts
    291
    Feedback Score
    0
    Fellas,
    is the .260 ammo widely available yet(factory)? I am interested in one down the road but went through the 6.8mm spc fiasco a few years ago and dont wish to repeat that experience.

    Thanks in advance.

  7. #7
    Join Date
    Oct 2006
    Location
    OH
    Posts
    2,852
    Feedback Score
    1 (100%)
    Quote Originally Posted by 223Rem
    However, I really do not think I will gain anything over my 7mm WSM Savage that is long-throated especially for the Berger 180 gr VLD which has a BC of .698. Talk about shooting a laser beam from a bolt gun.........
    You would gain a significant reduction of recoil. If all you shoot are five or ten rounds out of your bolt gun, it won't matter. Sit down and shoot 60 to 70 rounds in an afternoon and will be on your way to a flinch.

    The 260 Remington has plenty of ballistics horsepower.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •