Try this bolt upgrade kit. $4.95 and the right stuff. The stuff at the hardware store probably won't take the heat. G&R are great people too. They also have good deals on BCM uppers.
http://www.gandrtactical.com/cgi-bin...ion&key=BOLTUK
Try this bolt upgrade kit. $4.95 and the right stuff. The stuff at the hardware store probably won't take the heat. G&R are great people too. They also have good deals on BCM uppers.
http://www.gandrtactical.com/cgi-bin...ion&key=BOLTUK
Last edited by hals1; 10-20-10 at 06:22.
Owner/Instructor at Semper Paratus Arms
Facebook: https://www.facebook.com/SemperParatusArms/
Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/
M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141
Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com
FYI, I totally cleaned the Bushmaster today, then took it out to the range and ran 80 of Federal 50gr. JHP's though as fast as I could... Not one hiccup.
Upon examining one of the stuck Wolf 62gr FMJ's, I could see where the extractor ripped off some of the soft steel rim from the case.... further, the primer had backed out of the primer pocket and it was flattened...
I.G., I believe you're correct on the tight chamber... I'll rerun some Wolf ammo through the Rock River (same failure to extract) and see if it has the same case after being fired as the Bushmaster.
Integritas
AuP
Bookmarks