AR Picture Thread

**CrabNSR** · 04-26-17, 17:12

Originally Posted by scooter22

12.5"?

Nope, but it does look short, it's a 14.5" BCM pinned with KAC 3 prong to 16" and 13" URX4.

**Diamondback** · 04-26-17, 20:31

Project Gremlin 1.0 is slowly starting to take shape... Lower clamped into its machining jig, buffer kit stowed inside handguard, standard LPK safety already thrown into spares box and replaced with ambi. Timing washers and muzzle devices are stowed in the vault with the rifle they were originally meant for, so I'll mooch those and buy replacements later--they'll be less needed on the 6"-longer barrel.

Temporary upper not yet ordered--once the basic concept is tested with a 10.5 in the 1.0 build, I'll order a Daniel Defense or Andro Corp 10.3 FSB barrel for Gremlin 2.0's Aero upper and a Tennessee Arms hybrid lower, and the 1.0 complete upper with its factory handguard restored and this lower will be reassembled into a plinker pistol. (Yeah, I know, "buy once cry once" but part of the purpose here is gradual steps to slowly develop my gunsmithing skills--first finishing a lower from 80% blank, then assembling an unbarreled upper, then assembling and debugging a pistol, and finally barreling for the next few steps.)

**Dsully** · 04-28-17, 11:43

SD8A5375-Edit.jpg by Dsully, on Flickr

**TriggerFish** · 04-28-17, 12:08

^^Now that truly is the REAL "Leetle Friend"^^
Nice.

**Hammer_Man** · 04-28-17, 22:43

Originally Posted by RobertTheTexan

Hammer, That's a really solid looking AR. What 16" barrel is that? What optic are you leaning towards for your Recce?

Sent from my iPhone using Tapatalk

Thanks for the compliments! I used a 16" F1 Arms mid-length fluted barrel. I had my local shop bead blast the exterior, and apply a Teflon coating. I'm getting nice and tight groupings at the 25 meter zeroing range, so I have high expectations for it out at distance. The optics I'm considering are the following: Accupower 1-8, Vortex HD Razor II 1-6, Leupold MR/T 1.5-5.

**Brian Brazier** · 04-28-17, 23:20

My 7.5, thanks to the ATF now legal to shoulder, which is great for me, my back and neck are fused and with the Blade I can get the AR in a better position to get a great sight picture. Once I got the gas block dialed in it has run everything I put through it. The combination of the PWS DI Carrier and H3 buffer really make this Pistol a joy to shoot, and the added weight of the PWS Gen 2 Carrier increase dwell time

Mega Upper and Lower
Hyperfire EDT 2 Trigger
Faxon 7.5 Barrel
Nocveske Kx5
Odin Adjustable Gas Block
BCM KMR Alpha 9 and KAG
Radian Raptor CH
Holosun HS503GU with MI Co Witness Mount
MBUS Sights shown, changed to MBUS Pros
KAK Tube and Shockwave Blade
LAW Gen 3 Side Folding Adapter
PWS DI Gen2 BCG, Racheting End plate, and H3 Buffer
Aero LPK
MFT Engage Grip

**Caeser25** · 04-28-17, 23:28

New build. Aero upper, lower and SPR mount. SD3G for now. BA Hanson SS barrel. PWS TRIAD. KMRA 13. Magpul miad, slk stock and asap (probably taking off.) Steiner P4XI. Aim Surplus nitride BCG. V7 inconel gas tube (I must've been drunk when I ordered it, paying $65 for a gas tube. Coreet charging handle, similar to BCM mod 5. Might swap the stock for something else. B5 Bravo maybe.