Vepr 7.62x54r with red star arms adjustable trigger
YjgVLZy.jpg
Vepr 7.62x54r with red star arms adjustable trigger
YjgVLZy.jpg
Last edited by machinegunphilip; 07-04-15 at 19:10.
Untitled by Austin Scott, on Flickr
Kiowa pilot turned Hooker.
My first precision build using my existing lower.
LOWER:
Anderson
Geiselle SSA-E
Magpul ACS-L
BCM mod3 grip
H3 buffer
Tactical Link battery assist lever
UPPER:
BCM4
Lija 24", 4 groove, 8 twist, rifle length gas, .093" gas hole
MI .936" low profile gas block, 3 setscrew fasteners
PWS 15" keymod free float rail
DD keymod bipod adapter
BCM bcg
BCM mod4 CH
Leupold MK2 IMS 1" scope mount
Leupold Mark AR 6-18X40mm
Harris bipod
This is going to be a bench and prone rifle single loading from a Bobsled.
Full weight about 11 lbs.
Clarence
Last edited by AM-15; 10-18-15 at 11:29.
My new Centurion Arms built RECCE.
- Centurion Arms complete Upper Reciever
- Lilja 16" RECCE Barrel
- Nightforce NXSc 2.5-10x24 Mil ZS optic
- KAC High Scope Mounts
- KAC FF RAS
- KAC Flip up front & rear sights
- KAC Harris Bipod mount
- Harris Bipod
- SOPMOD Stock
- Geissele Hi-Speed Designated Marksman Rifle (DMR) trigger
- SureFire FH556-212A Flash Hider and Suppressor Adapter 5.56
Paul A. Hotaling
Alias Training & Security Services, LLC
Paul@aliastraining.com
757-215-1959 (Mon-Fri 8AM-5PM)
757-985-9586 (After Hours)
www.aliastraining.com
Hi All,
My name is Dan and I am the tech support guy for Lancer Systems.
I recently joined m4carbine to enjoy the camaraderie and answer any tech questions that may pertain to Lancer's products.
I look forward to being part of this community.
We just finished this yesterday for me.
No more borrowing one of the company's rifles
Lancer Systems L30 LTR kit
Bartlein 24" barrel w/ 1-11.25 twist and target crown, chambered in 308 Win Match
SLR Gas Blcok
Rubber City Armory HP BCG
LMT DMR Stock
Geissele High Speed NM DMR Trigger
Sightron SIII 8-32X56 w/ 1/8 MOA turrets in EGW Low Rings and Vortex scope level
Sinclair Gen 2, F-Class bipod
Benchrest grip from our armorer's personal stash
This originally came with a full-length, 20MOA rail but we chopped one down to get the scope closer to the bore.
It's primarily set up for F/ TR.
20150817_152157_resized.jpg
20150817_152246_resized.jpg
20150817_152213_resized.jpg
Daniel Wolfgang
Customer Service Technical Specialist
Advanced Weapons and Components Division
Lancer Systems
2800 Milford Square Pike
Quakertown, PA 18951
dwolfgang@lancer-systems.com
Phone: 610 973 2648
Here's one I've been playing with recently. Some of it was out of the spare parts bin so there are a few items I wouldn't mind changing, but overall it accomplishes what I want. Shoots a consistent 1moa with 3/4moa groups pretty easily attainable. It likes a pretty firm hold so I added a loop of paracord to a shooting mat and that allows me to really load into the bipod. Not very practical for field use but I like to see what it can do in ideal conditions.
Mostly DD parts, Lothar Walther bbl, Bushnell FFP 3-12.
The opinions posted above are my own and do not represent any current or former employer.
I just put the finishing touches on my updated recce/DMR. I tried out an 18" barrel but I found myself wanting to go back to a 16" mid-length, it just felt right. I also tried an offset red dot sight but ended up not liking it but I had already moved my Griffin Armament Fail Safe Sights to my 2-gun rifle so I picked up a set of Magpul offsets.
CMT forged upper
BCM Mod 4 CH
CMT FA BCG
Rainier Arms 16" match barrel
Damage Industries Flash Hider (Budget Surefire FH556)
BCM KMR-13
NF 2.5-10X24 mil/mil ZS in NF A191 mount
Magpul MBUS Pro Offset Sights
RRA forged lower
Geissele SSA-E
Magpul BAD lever
Sierra Precision SPR Grip w/ grip tape
Vltor E-Mod stock
Armageddon Gear Precision Rifle Sling
Bookmarks