Larue lower. Input please.

[Interventionist]

Have a Larue lower coming. Would appriciate input on lower parts kit to install (or avoid). This will be a SPR type build with the stealth 16in. upper. This will be a duty gun(Sheriffs dept) so I am looking for a reliable system with the best trigger pull. Thank you for your time and experience.

[spamsammich]

G&R lpk minus trigger, geissele ssa trigger. /thread.

[Belmont31R]

G&R lpk minus trigger, geissle ssa trigger. /thread.

Sounds like a good combo.



OP-


Id also take a look at the KAC ambi safety/selector kit.

[nickdrak]

I would also recommend the G&R Tactical LPK. I also highly recommend the BattleArmsDevelopment BAD-ASS ambi selector: http://battlearmsdevelopment.com/badass.php

As far as the trigger goes, without knowing what your department restrictions on triggers is and what specific role this rifle will play, I cant really give an educated recommendation. When you say "SPR" I assume you will be mounting a medium power magnified scope on it?

[Interventionist]

Thank you for the recomendations. No match or jewel triggers. Nothing below 4lb. break. Will be outfitted with nightforce 1x4 nxs. Use will be as a marksmans rifle in urban settings.

[nickdrak]

That would pretty much eliminate any triggers from Geissele as they all break at below 4lbs I believe. If you call them directly I'm sure they can build one that will break at just over 4lbs if that is what you require.. Wilson Combat has a drop-in LE Single stage trigger that breaks at 5lbs. I have not tried one so I can't give you my impressions. I run a Spike's nickle boron "BattleTrigger" with a set of JP trigger/hammer/disconnector springs. Mine breaks right at 4.5lbs

[RyanB]

The Geissele High Power triggers break at 4.5 plus, as that is required by the rules of that game.

[nickdrak]

The Geissele High Power triggers break at 4.5 plus, as that is required by the rules of that game.

That would be considered a "Match" trigger, no?

[SA80Dan]

That would pretty much eliminate any triggers from Geissele as they all break at below 4lbs I believe. If you call them directly I'm sure they can build one that will break at just over 4lbs if that is what you require.. Wilson Combat has a drop-in LE Single stage trigger that breaks at 5lbs. I have not tried one so I can't give you my impressions. I run a Spike's nickle boron "BattleTrigger" with a set of JP trigger/hammer/disconnector springs. Mine breaks right at 4.5lbs

The 'combat' type 2 stage triggers from geissele are also right around 4.5lb total. SSA and SD-C.

[Birddog1911]

You could certainly do a lot worse than Geissele. I think that their 3-gun breaks over 4#. If that's one of the ones above, sorry.