C-Products 9mm Mags - Initial Mini-Review

[blaster22]

Just got three 32's from 44Mag. Don't feed in my RRA with factory ball. Appears the carrier is rubbing the right side feed lip, slowing down the BCG. I'm gonna tweak and retest. Mags look great, but need to work 100%.

[Madsmiley]

Anyone had to modify the C-Products 32rd 9mm mags??

New build..When mag is inserted till catching on mag release catch,it pushes up the bolt release. Looks like the slot for the mag catch on the mag needs to be about 1/4" higher..

[SHIVAN]

Anyone had to modify the C-Products 32rd 9mm mags??

Re-read my post. I had to have C-Products modify the mags to work with a Hahn block.

[Madsmiley]

Re-read my post. I had to have C-Products modify the mags to work with a Hahn block.

I just took a dremel tool to 2 of them..They seem to work now,will know for certain next week when I take it to the range..

[chrismartin]

I just took a dremel tool to 2 of them..They seem to work now,will know for certain next week when I take it to the range..

Out of curiosity, what did you need to do and why?

Chris

[Madsmiley]

Out of curiosity, what did you need to do and why?

Chris

Mag was sitting to high and would not allow the upper to close down on the lower..Needed to expand the mag catch hold somewhat for it to work..

[TacDoc]

I placed an order at Midway for 5 C-prod 9mm 32 rounders (Midway return policy is unbeatable, just in case )

How I can differentiate Gen 1 from Gen 2 followers?

Pics will be greatly appreciated.

[rob_s]

I placed an order at Midway for 5 C-prod 9mm 32 rounders (Midway return policy is unbeatable, just in case )

Good call ($3 off too!).

[BigTinVA]

So what's the general consensus on these mags? Are most of you guys having good success with them...are they worth gambling on?

I currently have a RRA with an ASA top load mag block, but I have a Hahn dedicated top load block with bolt hold open on the way. I know the ProMags work well, but I want some metal mags that will hold the bolt after the last round.

Thanks!

[Robb Jensen]

So what's the general consensus on these mags? Are most of you guys having good success with them...are they worth gambling on?

I currently have a RRA with an ASA top load mag block, but I have a Hahn dedicated top load block with bolt hold open on the way. I know the ProMags work well, but I want some metal mags that will hold the bolt after the last round.

Thanks!

Tim, one of my co-workers bought three that wouldn't run well at all (they slowed the bolt down). He did a little fitting and got them running 100%.