The lack of penetration would suck on people
The lack of penetration would suck on people
These data are helpful, thanks. I can't verify your tested BCs nor am I questioning their validity, but either way in my example above it appears that I compared the best BC among 204 and 223 rounds and there is a negligible difference in wind drift .i.e., < 1 MOA at 500y.
Sure looks like apples to me.
Edit: When you factor drop AND wind drift, the .204 round is a compelling option.
At any rate, I'll trade you a steak dinner in Cody for an Alaskan wild salmon dinner in Seattle
Last edited by Warg; 07-15-11 at 22:30. Reason: Added comment re: drop
I've no doubt that the heavier 5.56 rds will hit harder. Also, .308 rds will hit harder than 22-250. That being said, my 22-250 is always in the truck when I'm out on the ranch in Douglas and I'd damned sure pick a reliable .204 with good ammo over a 5.56 every time. I know that I shoot better with the .204.
This may be a bit premature, but here is the progress on the first 204. This is the gun I'm putting together for my uncle. I decided on a silver and black theme just for kicks.
There are some parts in there that I wouldn't necessarily pick, but they may be suitable for a varmint gun.
So far:
Spikes lower
A few chromed (satin finish) DPMS lower parts like takedown pin, pivot pin, mag catch/button. DPMS offers a chromed bolt catch, but I did not want to go there.
G&R LPK for the others
TD pistol grip
Geissele SSA-E trigger
Magpul PRS with glass bead blasted aluminum bits and cerakote (satin aluminum) on the steel screws. I brushed the lip of the buttplate for added contrast and to match the BC and barrel.
DPMS Lo Pro upper
JP 12" HG & cerakoted HG crews
Young NM BCG staked via MOACKS
Shilen barrel, fluted
BCM GF CH Mod 3
LaRue scope mount with cerakote on the screw heads
Sadlak 0.936" GB
I'm going to sight it in with whatever optic I have lying around as my uncle already has a scope.
The darn thing is heavy at 10 lbs 3 oz! Here's a size comparison vs. a 16":
For the second build, I'm definitely going to have the other barrel reprofiled first, then dimpled or fluted. I'll start another thread on these with more details when they're finished and sorted out.
Last edited by Warg; 08-07-11 at 21:40. Reason: Updated parts and weight data
pimpin....!
Bookmarks