Page 1 of 2 12 LastLast
Results 1 to 10 of 51

Thread: 9 mm 124 gr testing

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2006
    Location
    Palo Alto, CA
    Posts
    3,347
    Feedback Score
    0

  2. #2
    Join Date
    Jan 2009
    Location
    Topeka, KS
    Posts
    1,583
    Feedback Score
    3 (100%)
    I get the bare gelatin and four layer denim abbreviations, but what is "AG"? Auto glass?

    At any rate, thanks for posting.
    Last edited by tpd223; 08-31-11 at 01:11.

  3. #3
    Join Date
    Jul 2006
    Location
    Palo Alto, CA
    Posts
    3,347
    Feedback Score
    0
    Automobile laminated front windshield glass (AG) intermediate barrier placed at 45 degree angle, 18 inches in front of gel block.

  4. #4
    Join Date
    Apr 2009
    Location
    Texas
    Posts
    4,368
    Feedback Score
    17 (100%)
    Fantastic work, Doc!

    In your experience, is there a meaningful difference (or improvement) in the terminal performance of the 147gr HST and the 147gr +P HST?

    Again, your work is a credit to the forum and much appreciated.

  5. #5
    Join Date
    Jul 2006
    Location
    Palo Alto, CA
    Posts
    3,347
    Feedback Score
    0
    No agency has ever asked us to test the 147 gr +P HST, so I don't have any data comparing the two. Let me see if we can get a box and we'll take a look at it.

  6. #6
    Join Date
    Apr 2009
    Location
    Texas
    Posts
    4,368
    Feedback Score
    17 (100%)
    Quote Originally Posted by DocGKR View Post
    No agency has ever asked us to test the 147 gr +P HST, so I don't have any data comparing the two. Let me see if we can get a box and we'll take a look at it.
    I am very interested to see the results if you get the chance.

    The factory figures do not indicate an enormous increase in MV and the non +P loading is much more readily available online.

    I carry a G26 for off-duty with my agency. We issue 124gr +P Gold Dots for 9mm. However, when I travel out of county (and sometimes out of state), I am left to carry my own ammunition and I'd like to gain every bit of performance I can from my G26's short barrel.

    I know you're busy, and thank you again for taking the time.

  7. #7
    Join Date
    Jan 2010
    Posts
    44
    Feedback Score
    1 (100%)
    Quote Originally Posted by DocGKR View Post
    No agency has ever asked us to test the 147 gr +P HST, so I don't have any data comparing the two. Let me see if we can get a box and we'll take a look at it.
    I'd also be interested in seeing the test results for this load.

  8. #8
    Join Date
    Feb 2007
    Location
    TN
    Posts
    59
    Feedback Score
    0
    DocGKR...first, thank you.

    Second, regarding the 9mm 124gr Gold Dot...
    I understand that it does not perform as well as the +P version, but the "numbers" for the standard pressure version don't look too bad and comparable to some rounds that did make your recommended list (I realize that you have said it performs fine).
    Thinking there's more to it, could you expound on it's absence from the list?
    Last edited by TN-popo; 10-05-11 at 08:18.

  9. #9
    Join Date
    Jul 2006
    Location
    Palo Alto, CA
    Posts
    3,347
    Feedback Score
    0
    The 124 gr +P worked better... If someone needs a standard pressure 124 gr, then by all means, the Gold Dot is fine.

  10. #10
    Join Date
    Apr 2009
    Posts
    29
    Feedback Score
    0
    Thanks for the excellent info. Have you ever tested the Speer 115 gr +p+ Gold Dots?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •