New Noveske NSR rail!

[JAustin316]

Finally got my Noveske 12.5" GPR upper put back together. Had the barrel cut down to 11.98" to draw the AAC SPR/M4 in nice and close to the NSR for that seamless look.

Really nice setup you have there... if only I could get cans in CA.

[WS6]

So, once you install the rail, you can just remove it with the screws I can see? Meaning, you should be able to swap rails fast and easy in just a minute or two and have them line up perfectly, as long as you account that you will likely have to re-zero sights just a touch?

Also, is this 6601, or 7075, or...?

[n4p226r]

So, once you install the rail, you can just remove it with the screws I can see? Meaning, you should be able to swap rails fast and easy in just a minute or two and have them line up perfectly, as long as you account that you will likely have to re-zero sights just a touch?

Also, is this 6601, or 7075, or...?

once the barrel nut is torqued properly, there is only the 6 hex screws you see. two at 3 o clock, 2 at 6. and 2 at 9. there is also a pin that goes between the two but that isn't held in by anything

[Onyx Z]

So, once you install the rail, you can just remove it with the screws I can see? Meaning, you should be able to swap rails fast and easy in just a minute or two and have them line up perfectly, as long as you account that you will likely have to re-zero sights just a touch?

Yes, exactly.

[Voodoo_Man]

btw, I have this NSR barrel wrench thing - http://www.shopnoveske.com/products/...wrench-adapter

I have no use for it. Someone need it? Pay for shipping and pass it on?


edit; that was quick Onxy Z is getting it first, I'd like this to be passed on to anyone else as long as they pay for shipping and agree to pass it on to someone who needs it.

[bates]

btw, I have this NSR barrel wrench thing - http://www.shopnoveske.com/products/...wrench-adapter

I have no use for it. Someone need it? Pay for shipping and pass it on?


edit; that was quick Onxy Z is getting it first, I'd like this to be passed on to anyone else as long as they pay for shipping and agree to pass it on to someone who needs it.

PM Sent

Sir I need to install one on a build but will pass long as well

[Iraqgunz]

This thread was originally about the release of the NSR. If you think you need to start a new NSR thread or find an existing one to discuss this, please do so. If not use the PM feature.