Quote Originally Posted by markm View Post
I use a press mounted bullet pulling die, then give the brass a light kiss with a VLD debur tool, replace the powder charge, seat the OTM, and put a light Factory Crimp on the round to ensure decent neck tension.

If it's XM193, I'll save the bullet and drop the powder charge at least one full grain... Then I'll put those components in used brass for blasting.
I understand what you're doing, but why don't you just start with primed brass? The whole point of Mexican match was to just pull a bullet and replace it with a better bullet, without having to go thru all the other stuff. At least, that's what I'm doing. Replacing the 55gr or 62gr ball bullet with a better bullet of the same weight, hoping to get better accuracy without going thru the whole process you've outlined. I won't end up with true "match accuracy", but that was not the intention to begin with.

see here:
http://www.theboxotruth.com/educatio...ch-ammunition/