The Official SBR Picture Thread

**erh** · 04-14-08, 22:42

'Made some changes..

I could really use a used or "Bargain Basement" LaRue Pivot mount...

E!

**rob_s** · 04-18-08, 11:39

Originally Posted by Stephen_ATS

The new AAC Blackout QA adapters came in this week. I haven't had a chance to shoot it yet though.

Here is a picture of the 6.8mm LWRC PSD compared to a 16" M4 with the stock fully collapsed. Note that the PSD is still shorter even with the stock at the second notch. This PSD, shooting the SSA OTM, has more energy at 100 yards than the 14.5" M4 has at the muzzle. The bullets have a lower fragmentation threshold than the M193 and M855 as well allowing it to retain that increased lethality at longer distances.

Do you happen to have a pic of the upper with the lower handguard off? I'd like to see the barrel profile.

**Saginaw79** · 04-18-08, 11:43

I think I need to SBR my M4orgery

a 10.5-11 incher looks good LoL

**SilentButDeadly** · 04-18-08, 19:00

**jakjakman** · 04-19-08, 01:54

Originally Posted by molsen

Wow, great blaster! I'll eventually be doing a similar build with a LaRue upper. So I can get an idea, could you tell me the lengths of the barrel and handgaurd on your rifle? Thanks.

**molsen** · 04-20-08, 15:55

Originally Posted by jakjakman

Wow, great blaster! I'll eventually be doing a similar build with a LaRue upper. So I can get an idea, could you tell me the lengths of the barrel and handgaurd on your rifle? Thanks.

Thanks! Here's the way I'm gonna keep my SBR. I just threw that Short Dot on there to see how it would look, but that made for a VERY heavy package.

That's an LMT 10.5" barrel and a LaRue 10.0 rail.