so the Colt LPK is the best ? I thought all Colt AR lowere were large pin units,do they make a standard small pin LPK ? I'd pay $85.00 for a Colt standard small pin LPK if I knew where to get it .
WHO ME ? ---- A government big enough to
give you everything you want, is
strong enough to take everything
you have.
-- Thomas Jefferson
Grant do you sell the LMT LPK? I didn't see it on your website. I thought they only come with their lower assembly. Please correct me if i'm wrong.
great that's what I needed to know . so the Stag LPK at $65.00 is out of spec ? I was under the impression Stag/CMT made the LPK for Colt, at least that's what a vendor has told me. I will spend more to get the Colt or LMT if they are indeed better . what I was going to do is lightly polish up the contact points lube it and install it . how deep is the heat treating to harden the parts,I don't want to F them up .
WHO ME ? ---- A government big enough to
give you everything you want, is
strong enough to take everything
you have.
-- Thomas Jefferson
Number of builds, about 30 give or take. I have tried a total of 3DPMS I got when back when I figured an LPK is an LPK. It was junk so I took it back and they replaced it, then this one was even worse so again I went back and got yet another that was not as bad as the first two and i made it work with some effort and spares I had.
I did 1 build on an RRA kit for my brother who really wanted the RRA kit because he "heard" they made the "bestest" 2 stage trigger. That one went together fine although the trigger took a dump after about a year.
CMT kits I've done maybe 10 or so builds with. They were fine at first but then I started getting some that were about as bad as the DPMS LPKs. So I stopped trying to save money and bought COLT lower parts. I'd rather pay extra for the quality and QC then keep going through the headaches with the others.YMMV. FWIW I have not yet tried the LMT LPKs and would certainly like to.
Bingo! so demand has driven down quality on the CMT LPK's while they try to maintain the lower price...It's the same thing with their lowers and tight mag wells etc. That has been my experience. What about Bushy?
Bookmarks