What design or who makes soft armor that fits in the Eagle Plate carrier?
-DM-
What design or who makes soft armor that fits in the Eagle Plate carrier?
-DM-
Paraclete at Grey Group
http://www.greygrouptraining.biz/Par...p/sp3sa019.htm
PACA at Triad Tactical
http://triadtactical.com/?mainURL=/s..._Products.html
I have an OTV that was issued to me, I will have to see what style and who the manufacturer is.
-DM-
Dick,
If you are referring to the Interceptor OTV it more than likely made by Point Blank. That is who made mine.
Roger that. It is a Point Blank.
-DM-
A little specificity:
They Grey Group product linked, and similar products from other vendors are PLATE BACKERS. They fit in a carrier behind a plate. Some are not even NIJ rated, only listed as plate backers(GG add shows the Paraclete as IIIA).
The product that PACA makes for Triad Tactical is designed to FILL the available space inside the Eagle Industries Plate Carrier. What this does is provide additional coverage from the "wings" on the edges of the PC sections.
You can see the wings in the photo:
Also, as one members here has noted, the laminated products (Dynema) have taken a beating in regards to contact shots. The PACA IIIA inserts are Tarwon which is a 100% aramid fiber.
Steve.
Hey Triad!
Would one of the sizes of PACA IIIA CIRAS inserts work with the beez combat system carrier I have?...
http://beezcombatsystems.com/BCSNIJ.html
"What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v
Here is the sizing info for the CIRAS panels:
Steve.
A little clarification. We sell Dyneema plate backers that are NIJ IIIA rated because they are much thinner than the Twaron. We can sell both, but our customers are usually concerned about backers fitting behind the plates. Which leads me to my next point. If contact shots are a concern with Dyneema armor then it's probably a good thing there's a hard plate in front of it.
I'm not trying to start a pissing contest. I just want to clarify anything that might have been misunderstood in previous posts.
We have both Dyneema and Twaron BALCS and RAV cut armor as well as plate backers. All in stock, depending on your size. We don't have soft armor cut for the Eagle plare carrier. Let us know what you need.
Later,
Bookmarks