It appears not based on lack of reference on the B5 site, but wanted to see if anyone knows for sure.
It appears not based on lack of reference on the B5 site, but wanted to see if anyone knows for sure.
“God doesn’t need your good works, but your neighbor does.” - Luther
Originally Posted by 1168
I don’t know for sure, but if it’s like the Magpul fixed carbine stock it won’t be. It does say on B5 that it is designed for mil spec carbine RE’s, which the A5 is not so I’m leaning towards no it won’t work or it may work but you’ll have an ugly gap between the stock and receiver.
It's hard to be a ACLU hating, philosophically Libertarian, socially liberal, fiscally conservative, scientifically grounded, agnostic, porn admiring gun owner who believes in self determination.
Chuck, we miss ya man.
كافر
It says on their website it fits milspec carbine receiver extensions via set screw.
Without confirmation direct from B5, I’d say it won’t fit the A5 tube.
It will absolutely fit on an A5 tube.
The question is whether the depth inside will allow it to go completely over the A5, or if it will stop 3/4” out.
I don't believe it is designed to cover the RE tube, supposed to give A1 length of pull, IIRC length of A1 stock is around 13" but this is only 8.74" long. Appears to me it will lock in place and look like an extended carbine stock, I don't see why it won't work on A5, just overall length may be a little off.
“The Trump Doctrine is ‘We’re America, Bitch.’ That’s the Trump Doctrine.”
"He is free to evade reality, he is free to unfocus his mind and stumble blindly down any road he pleases, but not free to avoid the abyss he refuses to see."
I don’t see why it would not work but perhaps with more of an A2 lop rather than A1. The adjustment hole would also be a factor. IIRC Vltor made a 6 & 7 position, BCM is 8 and Magpul is 10.
It works fine, I have a 2 of them and have used them on a variety of RE, When I use those stocks, it is typically with a scoped weapon, so it isn't like they are put up against the receiver anyway.
Stick
Board policy mandates I state that I shoot for BCM. I have also done work for 200 or so manufacturers within the firearm community. I am prior service, a full time LEO, firearm instructor, armorer, TL, martial arts instructor, and all around good guy.
I also shoot and write for various publications. Let me know if you know cool secrets or have toys worthy of an article...
Flickr Tumblr Facebook Instagram RECOILMAGAZINE OFF GRID RECOIL WEB
Bookmarks