New Kaiser Universal sight tool

maximus83 · #1 11-03-2009, 12:50 PM

I'm wondering if anyone has actually bought or tried this tool yet. Searched the forum here for Kaiser and Uni tool and didn't find any hits. Watched the video for this tool last night. If you go to the following page at GlockStore.com, there is a link up above the picture of the tool to watch a video demonstration:

http://glockstore.com/pgroup_descrip...4063_UNI-2OOL/

This tool looks slick. It works similarly to the Ameriglo/MGW sight pusher tools that you can buy today for Sig, Glock, H&K, M&P, XD, etc., but in this case, the tool supposedly works on all these platforms, with most common sight types.

I am interested in buying, because I have about 6 different pistols that I am interested in updating the sites on, and by the time I send all those in or pay people to do them, I would have many times over the $150 cost of this tool. Seems like this could be a good investment making it easy to change or adjust sights whenever you want, without marring slides or crushing the sights.

JohnN · #2 11-03-2009, 04:09 PM

I would be interested to know if this pusher works with Warren,10-8 and Heinie sights. Many of the sight pushers on the market work well for conventional sights but not so much with the sights mentioned.

RAM Engineer · #3 11-03-2009, 04:49 PM

If it works with Warrens, 10-8s, Heinie AND the slant sided Trijicons, I'd be all over that.

DrMark · #4 11-03-2009, 04:54 PM

Looks interesting.

From the link:

Quote:

The NEW Uni-2OOL is the industry's first fully adjustable sight tool that will accommodate almost all modern handguns. It's designed to work on both front and rear dovetail sights. One ingenious tool will work on Glock, Sig, Beretta, all 1911's, Kimber, Taurus, Springfield XD and XDM, S&W automatics, HK and more. Because it is adjustable it will work with all types of guns and all types of sights.

Made of heavy, high quality steel with steel inserts. Will last a lifetime. Makes changing dovetail sights easy and affordable. Comes with instructional DVD.

glockaction · #5 11-06-2009, 02:50 AM

Yes it will work on the 10 8's it can ajust to proper hight.

nickdrak · #6 11-07-2009, 07:03 AM

Anyone know if this tool will work on the Glock/Heinie "Ledge" sight combo???

gotm4 · #7 11-07-2009, 11:38 AM

I'll stick with MGW sight tools. The only one I've broken (hey I can break an anvil) is the one for the Springfield Armory XD.

Dave Berryhill · #8 11-07-2009, 11:46 AM

It looks like an updated version of a sight pusher that Brownells used to sell (I've got one but don't remember the manufacturer's name).

One of the flaws of the earlier model was the adjustable pads that tighten down and hold the sides of the slide. That model had screws with large plastic pads that were supposed to hold the slide in position. It also had block of plastic underneath the slide that you adjusted with screws to set the height of the slide. It didn't hold the slide very securely and the slide would sometimes twist.

The UNI-200L model shown in your photo looks like it may be a little more secure since it has large square blocks that squeeze and hold the slide in position.

Another problem with the earlier model was that it was hard to adjust the tool to put downward pressure on the top of Glock factory rear sights without scraping the top of the slide. The Glock factory sight pusher has an adjustment screw for this. You will need to adjust the height of the slide in the UNI-200 to do this and it's hard to say how well that works since they don't show it in the video. For pistols other than Glocks (or for installing steel aftermarket sights into a Glock slide), this isn't an issue.

You didn't say what you intended to use it for. Most "universal" sight pushers are mediocre at best when compared to a sight pusher that is designed for a specific pistol. The factory Sig and the original factory Glock sight pushers hold the slide very securely (I haven't used on of the newer style Glock tools) and are sturdy tools.

For occasional use, it might be OK as long as you don't run into a rear sight that is really tight. If I had to change a large number of sights using the UNI-200, I'd probably run out of patience quickly and take a BFH to it.

Why don't you give it a try and post a review?

nickdrak · #9 11-07-2009, 03:32 PM

Which MGW tool works for installing Heinie's (Ledge variant) on Glocks?

glockaction · #10 11-07-2009, 10:00 PM

The UNI-200l jaws are coded with a bed liner so it will be tough and not slide, are mover is made from hard tool steel, and are side clamp has two dowel pins so it will close straight and not rock. It will last a life time.

DrMark · #11 11-07-2009, 10:25 PM

Quote:

Originally Posted by glockaction

The UNI-200l jaws are coded with a bed liner so it will be tough and not slide, are mover is made from hard tool steel, and are side clamp has two dowel pins so it will close straight and not rock. It will last a life time.

Are you the manufacturer, or perhaps a seller?

maximus83 · #12 11-07-2009, 10:56 PM

Went ahead and ordered one of the tools. I have about 9 or 10 guns that I need to either upgrade, replace, or adjust sights on, so by the time I either struggled through all this with my mediocre home-gunsmithing setup, or paid somebody else to do it, this tool will have easily paid for itself 3 or 4 times over (assuming that it works).

I'll do a write-up after I try it.

glockaction · #13 11-07-2009, 11:05 PM

Yes we are the manufacturer and we stand behind are product 100%, feel free to call us any time with any questions.

DrMark · #14 11-08-2009, 12:11 AM

Quote:

Originally Posted by glockaction

Yes we are the manufacturer and we stand behind are product 100%, feel free to call us any time with any questions.

Thanks.

Singlestack Wonder · #15 11-08-2009, 04:07 PM

I'd be interested in a video showing the tool removing a factory installed Kimber rear sight. The tool's frame doesn't appear to be hearty enough to press one of those out. It's tough even using the Kimber (Meprolight) tool which is the heavy duty king of all sight pushers.

maximus83 · #16 11-15-2009, 04:58 AM

I sure cannot recommend the tool for use on Kahr pistols, and I wonder how it will do on front sights generally. Tonight I tried it out, it worked fine on my Kahr PM9's rear sight. I used it to push out the old sight, and mount a new Trijicon 2-dot rear sight.

But the front sight? Total fail! The tool couldn't push it out, in fact, the steel on the tool appears to be softer than Kahr's steel front sights! It chewed up the steel tips on the pusher area of the tool (and yes, I had it PERFECTLY aligned).

[UPDATED]
After thinking about this some more, this may work well on some pistols, in fact it worked great on the rear sight of the Kahr. I suspect it would have more trouble with any pistol where the slide sides are tapered or not perpendicular (because they won't fit snugly in the jaws, which then causes slide to torque/twist when you turn the pusher). It will also have trouble with sights where they are very small or slim (like the Kahr front sight) and there is not much of a contact surface.

So, this may be a good general tool that will work with many pistol types, but I guess at this point it remains unproven. I will probably try it on a couple of more pistols and see what happens before I totally give up. But because the pusher steel was apparently softer than the steel on my Kahr's front sights, I am going to need a new pusher part. Guess I'll get to test out the company's service!!

Top Gun Supply · #17 11-15-2009, 08:41 PM

There are some sights that so tight that most sight pushers will not budge them. Kahr and XD can be seemingly impossible to remove.

maximus83 · #18 11-15-2009, 09:14 PM

You are right. That's why I updated my previous post: decided I shouldn't have my entire feedback based on just how it worked with the Kahr front sight. As I read around more on the web last night, I learned that Kahr pistols fit their sights notoriously tight, and that most people end up sending back to the factory to get them replaced. Actually, the Uni Tool did quite well getting the Kahr's rear sight out. I had to REALLY torque on it MUCH harder than the demo video showed (but they were using a Sig, I believe), but at least the rear finally came out, and the new one went in, with no damage. Given how tight Kahr sights are, I think the tool did pretty well on the rear, which leads me to think it MAY do well with other brands of pistols I own that have a more standard sight setup than Kahr (M&P, 1911, in my case).

I'm going to contact the company, and hopefully they'll work with me to replace the pusher piece that the Kahr's front sight chewed up. I think it's very possible that this tool will work well on other models of pistols that don't have their sights fit so tightly (I'm basing that on how well the tool worked with the rear sights on the Kahr).