Why don't you drip some lemon juice on my papercuts while you are at it
subzero,
You've got to remember that your gun choked on a test designed to show extractor weaknesses that would not show up under standard shooting. That demon was hiding in your extractor the whole time but shooting it without a mag in the gun let it been seen.
Guys, it was a great class and LAV and I really enjoyed it.
My Wilson CQB was as deliverd. It keeps chugging along. Round for round, it is the most reliable pistol I've ever owned.
I'll admit, although I dig 1911s, if I had some of the issues that some others had (even though they can be fixed) I would not be a 1911 guy any more. I though some one was issueing M-9s to some guys!
Very interesting class. I agree that it was somewhat of a humbling experience. I was able to determine quite easily "What I did not know vs. what I thought I knew" I will add some of the drills to my training. No malfunctions with my pistol, although we did not put a high round count down range. It was more Quality vs. Quantity in regard to round count. The class room exercise was good and many if not all received some hands on by Larry. Prior to this class I had never fired my pistol beyond 25 yds. so the backup drill on the steel was an eyeopener. I was comforted in the fact that I could actually hit the steel at 50 yards and out. I will be taking additional pistol classes and will be discriminating on selecting the instructors. I wish the class had been longer. Lots packed together in a couple of days.
I have a kimber warrior and it went back to the factory 6 times within the first year of owning it: loose plunger tube, bent thumb safety, worn kimpro finish after 150 rnds and no holster use. Sights were off - 3 inches high and 3 inches right at 25 yards and needed to be changed. The slide and reciever finish were miss matched untill I realized I knew someone at the factory, who took charge of my gun and got it squared away. After about 800 rounds I had problems with failure to feeds and the gun went back 2 times for that, my contact was able to fix as well. The word from inside the factory is low or no quality control.
Does larry have any more 1911 classes planned for 2007 or 2008? I'd love to make it too one.
This is now a standard Vickers Tactical class so we will hold at least one (probably more) every year at the South Hill range. You can also host one yourself if you have access to the range facilities.
Standard VT classes;
Pistol I
Pistol II
Pistol III
Carbine I
Carbine II
Carbine III
2-day pistol/carbine
3-day pistol/carbine
Ken Hackathorn/Larry Vickers Low Light
AK rifle specific class
1911 handgun specific class
Battle rifle specific class.
There are also 3, 4, and 5 day classes available in many of these formats.
http://www.vickerstactical.com/training/courses.htm
Paul A. Hotaling
Alias Training & Security Services, LLC
Paul@aliastraining.com
757-215-1959 (Mon-Fri 8AM-5PM)
757-985-9586 (After Hours)
www.aliastraining.com
...and based on what we were told during this class, "Expect to buy a 1911, and send it off to a 'smith for work, since no place producing 1911's is doing everything 'right'...."
I've gotten to the point where I just assume that any gun I buy will need to be sent somewhere to be customized for me in some fashion.
Luckily, I can do most of my own AR work. Now, I might start doing my own 1911 work too.....
Thanks dinger. I dont have access to facilities, but look forward to the next one you schedule
Bookmarks