AR pistol picture thread

**Brian Brazier** · 06-18-17, 16:19

Originally Posted by Macoffman

Just finished my first pistol build, can't wait to try it out!

BCI defense stripped lower and upper
Phase 5 buffer assembly
ALG ACT trigger
MI 9" t-series gen 3 hand guard
Faxon 10.5" barrel 5.56
Toolcraft BCG
VG6 gamma muzzle brake

Looks good but why didn't you go with a brace

**Macoffman** · 06-18-17, 16:35

Originally Posted by Brian Brazier

Looks good but why didn't you go with a brace

Not into the braces. Might add a shockwave in the future. Just want to try it this way before I decide to add anything else to it. I might SBR it someday also. This is in the raw finished state. Still need to accessorize. MGpul AFG, rail panels, flash light, etc. still debating an optic or just irons.

**quino171** · 06-28-17, 18:14

It has been a while. I just updated my AR15 pistol with the SB Tactical pdw brace. I am very happy with the build quality of this. The LOP is about the same as the original Sig Brace. But the reduction in bulk is the big plus. The OAL of this is clocked in at about 25.5". I am really happy. I am going to be using this as a travel gun.

Sent from my A0001 using Tapatalk

**hdrolling** · 06-29-17, 13:13

Added a few more parts to my 9" BCM 300 BLK pistol. I swapped the BCM muzzle device for a Noveske KX5, Swapped the 8" BCM hand guard for a 10" and removed the foam pistol receiver extension cover and installed a SB TACT SBM4 brace.

My magpul pro front and rear BUIS and 6 Lancer smoked mags should be here tomorrow so I can test it out on the range this weekend.

Just swapped the hand guard today.

IMG_8705 by hd_rolling, on Flickr

**cemoulton** · 06-29-17, 23:19

Griffin titanium minimalist taper mount opened up to .374, vltor mur, vltor casv-s, QC10 lower, cheep Joe Bob barrel that I cut down to 9.75 and then threaded. Topped off with a Griffin Optimus (the Optimus belongs to a friend). The rest is pretty obvious.

**Dannybot** · 07-05-17, 07:47

New paint for Independence Day on my wife's 9mm AR

**jimbob2525** · 07-10-17, 04:29

Originally Posted by Dannybot

New paint for Independence Day on my wife's 9mm AR

nice.

**Shagnasty** · 07-16-17, 04:07

It's getting a bit crowded for the growing subgun following. Can we get a thread for Pistol Caliber Carbines? Would be nice to see some PCC's not wedged between a dozen PSA 7.5" pistols in 223.

I'll kick things off with what I consider the (nearly) perfect iteration of the 9MM AR-15:

Gratuitous Arcteryx porn

I built what I imagined a 21st century version of the Colt 633 DOE gun would be like. 14.5" OAL folded, when I had the Law folder on there. Gun handles like a dream, and with the Ti-Rant on there, it's even quieter than my friend's MP5A2 with my can on that. It's my second SBR and the gun I am most proud of. Makes me feel like a secret agent.

Parts list:
Black Creek Precision EF9 reduced magwell lower
5.5" Ballistic Advantage 9MM barrel
Gunter USA 4" keymod rail
LWRC UCIW stock
Heavybuffers Xtra Heavy 9MM buffer. (the lynch pin to this whole setup)
Model 1 sales 9mm upper with gas deflector
ALG QMS trigger with KNS pins
Troy hooded front sight
Daniel Defense A1.5 rear
BCM Mod5 charging handle
Noveske single point backplate
Sig Keymod VFG with Handstop (SO choice. Really sells the MP5K vibe)

Well... As long as I'm not breaking some mysterious rule for requesting a pic thread...