New Noveske NSR rail!

**ryu_sekai** · 01-24-12, 16:12

in case i missed it, the rail alone will be for sale without buying complete upper right?

**ryu_sekai** · 01-24-12, 16:26

Originally Posted by Stickman

Sounds about right. I've got one sitting next to me right now if I can answer any other questions.

Is it thinner than the TRX extreme? The TRX is 1.74" i believe.

**Todd.K** · 01-24-12, 16:31

1.48" wide.

We do plan to sell it individually.

**ryu_sekai** · 01-24-12, 16:35

Originally Posted by Todd.K

1.48" wide.

We do plan to sell it individually.

SMG Lee mentioned it will need to have a hole drilled in the upper. Will the production rail work with my BCM upper?

**Skang** · 01-24-12, 16:41

Looking at the bolt pattern, it might be same as current SWS rail barrel nut?

I hope so.

**SMGLee** · 01-24-12, 16:46

Originally Posted by ryu_sekai

SMG Lee mentioned it will need to have a hole drilled in the upper. Will the production rail work with my BCM upper?

From my understanding, you will need to have that pin hole drilled into your BCM upper.

**Todd.K** · 01-24-12, 17:14

If you want the "anti rotation" it will need the hole drilled. The mounting style is secure enough without it, and really the whole anti rotation came about from some people who didn't tighten and or use thread locker.

The barrel nut is different. Lighter and the bolt pattern had to be changed.

**ryu_sekai** · 01-24-12, 17:15

Originally Posted by Todd.K

If you want the "anti rotation" it will need the hole drilled. The mounting style is secure enough without it, and really the whole anti rotation came about from some people who didn't tighten and or use thread locker.

The barrel nut is different. Lighter and the bolt pattern had to be changed.

Sounds good to me

. Put me down for a 13 incher!