 |
|
 |
| NFA Specifics of NFA firearms, SBR, Auto |
|
View Poll Results: Where to Engrave SBR Markings
|
|
Front of Magwell
|
   
|
16 |
30.77% |
|
Right Hand Side of Magwell
|
  
|
5 |
9.62% |
|
Right Hand Side Above Trigger and Hammer Pins
|
  
|
5 |
9.62% |
|
Underneath Trigger Guard
|
  
|
15 |
28.85% |
|
I Want to See the Results
|
  
|
11 |
21.15% |
02-11-08, 00:23
|
 |
Member
|
|
Join Date: Jan 2008
Location: Texas
Posts: 15
|
|
|
Where to Engrave SBR Markings
I put a poll up to help me decide where to have my SBR markings engraved on my lower receiver.
I was leaning toward the front of the magwell but I thought I'd see what everyone else thought.
The choices listed are those provided by Orion Arms as spots available for SBR engravings.
Thanks.
__________________
"He who asks a question is a fool for a minute; he who does not remains a fool forever." - Chinese Proverb
|
02-11-08, 05:22
|
 |
Banned
|
|
Join Date: Jun 2006
Location: SE FL
Posts: 14,246
|
|
|
Just FYI, this forum software doesn't require a "want to see results" option. Not sure if it will let you edit that out though.
As to the question, I'd opt for inside the trigger area, assuming your info will fit there.
|
02-11-08, 17:46
|
|
Senior Member
|
|
Join Date: Dec 2006
Location: Commonwealth of Virginia
Posts: 3,660
|
|
|
I had mine engraved at the front of the magwell only because I also had something else engraved on the side (my avatar to the left).
__________________
We must not believe the Evil One when he tells us that there is nothing we can do in the face of violence, injustice and sin. - Pope Francis I
|
02-12-08, 10:37
|
 |
Member
|
|
Join Date: Jan 2008
Location: Tulsa, OK
Posts: 16
|
|
|
Did anybody besides me engrave the barrel rather than the receiver?
|
02-12-08, 10:40
|
 |
Senior Member
|
|
Join Date: Sep 2007
Location: AZ
Posts: 15,941
|
|
Quote:
Originally Posted by Blindpig
Did anybody besides me engrave the barrel rather than the receiver?
|
No. .
__________________
"You people have too much time on your hands." - scottryan
|
02-16-08, 02:00
|
|
Member
|
|
Join Date: Feb 2008
Location: NE Ohio
Posts: 96
|
|
|
I am having the front of the magwell on mine done right now. The only reason I chose that location was because I wanted to test fire the lower first and then I didn't want to risk messing it up knocking out the roll pins for the bolt catch and trigger guard. Otherwise I would have done it above the trigger pins.
I would NEVER engrave the barrel on an AR15 SBR. Your lower should last a lifetime; your barrel could wear out or get damaged possibly. It might not even meet BATF requirements depending on how you read the regs.
Last edited by tkoglman; 02-16-08 at 02:04
Reason: PS
|
02-16-08, 11:25
|
 |
SENIOR STAFF
|
|
Join Date: Jun 2006
Location: NoVA
Posts: 4,744
|
|
|
I have all mine done above the FCG pins on the right side.
|
02-16-08, 12:03
|
 |
Member
|
|
Join Date: Jun 2006
Location: Texas
Posts: 127
|
|
Here is where I have mine.
__________________
Semper Fi
|
02-16-08, 20:00
|
 |
Member
|
|
Join Date: Sep 2007
Location: N. Arizona
Posts: 175
|
|
I like the pic USMC.
__________________
ΜΟΛΩΝ ΛΑΒE
|
02-17-08, 12:32
|
|
Banned
|
|
Join Date: Oct 2007
Posts: 126
|
|
|
Engraving the barrel isn't even an option. It has to be on the lower.
|
02-17-08, 12:39
|
 |
Senior Member
|
|
Join Date: Jun 2007
Location: FL
Posts: 1,286
|
|
Quote:
Originally Posted by SHIVAN
I have all mine done above the FCG pins on the right side.
|
Same here
|
02-17-08, 13:23
|
 |
Site Sponsor
|
|
Join Date: Jul 2006
Location: Northwest IN
Posts: 3,119
|
|
Quote:
Originally Posted by tkoglman
I am having the front of the magwell on mine done right now. The only reason I chose that location was because I wanted to test fire the lower first and then I didn't want to risk messing it up knocking out the roll pins for the bolt catch and trigger guard. Otherwise I would have done it above the trigger pins.
I would NEVER engrave the barrel on an AR15 SBR. Your lower should last a lifetime; your barrel could wear out or get damaged possibly. It might not even meet BATF requirements depending on how you read the regs.
|
It does meet the regulations of receiver or barrel. It's only a hassle when you want to swap uppers. At that point in time, each barrel of each barreled upper will have to have the engraving- even 16" plus ones.
|
02-17-08, 13:24
|
|
Site Sponsor
|
|
Join Date: Jul 2006
Location: Northwest IN
Posts: 3,119
|
|
Quote:
Originally Posted by mactastic
Engraving the barrel isn't even an option. It has to be on the lower.
|
Wrong. Sorry.
CAN be done on an AR but doesn't make much sense so you just don't see it done.
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 09:23.
| |
.gif){kind=logo}
