Lancer AR Mags

[C4IGrant]

We are now stocking these!


C4


Place orders here: http://www.gandrtactical.com/cgi-bin...tion&key=30RDT

The L5 Advantage for professionals:

Increases Op-Tempo
Pre-combat inspections and checks
Post contact checks
Speeds ammunition consolidation
Tactical Magazine Changes
The rubber bottom and body texture improve gripping
Drops free from lower receivers
The magazine is designed to resist damage from rough handling, dropping and abuse

Features:

Made in the USA
Translucent polymer body that is impact resistant through a wide range of temperatures
Can be dropped onto the feed lips without damage
Withstands 5’ drop, fully loaded onto concrete at -50F and +180F
Withstands 5’ drop, fully loaded dropped with rifle
Body and component materials that are corrosion and chemical resistant
Steel feed lips with a corrosion resistant coating, permanently molded into the body.
Round Count Markers at 20 and 30 rounds
Body texture, contour and rubber coated bottom are designed to provide positive gripping and improve retrieval from magazine pouches.
Body design incorporates a constant radius geometry that facilitates follower/spring travel.
Same basic design envelop as the USGI aluminum magazine, can be used with existing pouches and carriers.
Easy to disassemble and maintain

[Dave L.]

I like these.

Are they still working on the "anti-tilt follower" for them...even though it's a non issue?

[C4IGrant]

Originally Posted by Dave L.

I like these.

Are they still working on the "anti-tilt follower" for them...even though it's a non issue?

I really do not know. I have run these mags in several training classes without a single issue so I would say that they are GTG.


C4

[LancerSystems]

Originally Posted by Dave L.

I like these.

Are they still working on the "anti-tilt follower" for them...even though it's a non issue?

Yes. we are building the tool now, they should be available after SHOT (mid Jan) assuming testing goes well.

[Steve]

Testing is going well so far.......

[SuicideHz]

I really like the single mag I bought from Aim. It works perfectly and hey, it looks nice!

I just can't bring myself to purchase more when the Pmags with window can be had for about $2 cheaper.

LS- any chance or possibility that these can be produced and sold for the same price as the windowed Pmags? I'm thinking that if they were the same price, you'd sell an awful lot more of them.

I'm sure they are worth the cost, I know they are worth the cost. But in these tight times, everything comes down to price.

I don't see these too often in picture threads and I'm sure if they were $2 cheaper we'd see them everywhere. That would also be a benefit in the fact that if people were to see them as often as Pmags, they may be more inclined to purchase a few themselves.

[Rogue7a]

I got several to T&E and they are working great so far.

Lancer states that they will be coming out with a mag with non tilting follower that you don't have to download to 28 rounds. They said the current spec was via Colt

[Dave L.]

Originally Posted by LancerSystems

Yes. we are building the tool now, they should be available after SHOT (mid Jan) assuming testing goes well.

That's great to hear. I'm also patiently waiting on your 20 rounder to come out.
Any ETA?

[Dave L.]

I didn't want to be greedy so I only ordered 4

[C4IGrant]

Originally Posted by SuicideHz

I really like the single mag I bought from Aim. It works perfectly and hey, it looks nice!

I just can't bring myself to purchase more when the Pmags with window can be had for about $2 cheaper.

LS- any chance or possibility that these can be produced and sold for the same price as the windowed Pmags? I'm thinking that if they were the same price, you'd sell an awful lot more of them.

I'm sure they are worth the cost, I know they are worth the cost. But in these tight times, everything comes down to price.

I don't see these too often in picture threads and I'm sure if they were $2 cheaper we'd see them everywhere. That would also be a benefit in the fact that if people were to see them as often as Pmags, they may be more inclined to purchase a few themselves.

Kind of apples to oranges with comparison to the windowed PMAG as the Lancer has a rubber buttplate on them. Think of the PMAG with an L Plate on it. Now the prices are inline with one another.


C4

[Dave L.]

A major selling point for these(IMO) is their profile. T-Mags are more of the GI Mag profile which makes them fit in double pouches much easier.
I have all PMAGs out here in Iraq, and I place the front mag higher in pouch due to the flared bottoms. T-Mags fit in pouches like they are supposed to..