Precision AR Build - Pics

Nitrox · #1 07-04-06, 19:38

This is an AR I put together last year but thought I'd post it anyway.

Specs:

-18" CM Badger 1:8 twist cut and chambered by Norther Compeition - Heavy flutes, chryo, shot peened, deep blued (KG coated by myself)
-Ameetec/LAR receivers
-Colt bolt and carrier
-Geiselle Trigger
-LMT receiver extension and SOPMOD stock
-AAC Buffer w/standard carbine buffer spring
-DD 12.0 M4 Rail
-PRI Gas Buster and gas block
-Magpull MIAD grip and curved trigger guard
-OPS INC SPR Brake and collar
-OPS INC 15th model suppressor (not pictured)
-Leupold 3.5X10X40 LR/T
-Larue SPR mount w/10 MOA
-Harris BRMS w/ ARMS mount

I don't have any targets to post so I'll just says it shoots well and leave it at that.

bigbore · #2 07-04-06, 20:54

The 15th will balance it nicely, good choice.

Nitrox · #3 07-04-06, 21:06

.....

Nitrox · #4 07-04-06, 22:06

.....

**M4arc** · #5 07-05-06, 15:21

Very nice build Nitrox!

Clean and effective.

CapnCrunch · #6 07-05-06, 19:13

That's a well thought out build. I especially dig the barrel choice.

DevilDog · #7 07-06-06, 10:36

Very nice Nitrox - looks good.

I am interested to know what do you have the trigger at?

.. and what do you typically feed it?

Nitrox · #8 07-06-06, 18:24

Not sure what you mean with the trigger but it is a fixed single stage that measured close to 3.5 pounds.

I feed it hand loads. 77gr Nosler, BH cases, Fed 205M primers, 23gr Varget.

DevilDog · #9 07-06-06, 20:10

Quote:

Originally Posted by Nitrox

...close to 3.5 pounds.

That's what I meant! Thanks.

Good load, I've had a lot of success with Varget and heavy bullets (68 to 80) whether they be Hornady, Sierra, Berger or Nosler - it seems to be one of those loads that most quality ARs like.

Nitrox · #10 07-06-06, 20:44

I would use the VLD or 75 gr AMAX but they don't fit in mags so they sit in the box they came in.

**VA_Dinger** · #11 07-09-06, 14:15

Not only nice, but damn nice.

Sweet rifle.

SIMPLYDYNAMIC · #12 07-11-06, 19:30

WASSSSSSS-UP M4CARBINE.NET!!!!!!

**M4arc** · #13 07-11-06, 20:03

Quote:

Originally Posted by SIMPLYDYNAMIC

WASSSSSSS-UP M4CARBINE.NET!!!!!!

Well it's certainly nice to see you here, welcome

k9dpd · #14 07-11-06, 21:55

Sweet rifle Travis

bigbore · #15 07-11-06, 23:18

Quote:

Originally Posted by SIMPLYDYNAMIC

WASSSSSSS-UP M4CARBINE.NET!!!!!!

Nice Can choice

SIMPLYDYNAMIC · #16 07-12-06, 03:13

thanks BIG, yours isnt so bad either!

Robb Jensen · #17 07-18-06, 07:30

Here's my wifes Noveske Afghan. It's was 14.5", I had it cutdown to about 13.5" and had the M4-2000 SOCOM mount perm. attached for a 16.1" overall barrel length. Randall Rausch of www.ar15barrels.com did a wonderful job. Another shop (name begins with a 'T' and ends with an 'i', in Glen Allen VA) had bent the threaded portion of the barrel removing the Rocksetted Gemtech M4-96 FSr and couldn't remove the Larue rail. Randall had no trouble with it and had it back to me in less than 2 weeks and he's in CA.

updated pic with the new M4-2000 Mod 07.

nickdrak · #18 07-18-06, 19:39

Heres my 6.8 build:

SIMPLYDYNAMIC · #19 07-21-06, 20:58

nickdrak · #20 07-22-06, 04:45

Thats right Sir, I copied the ol' para-cord on the bipod trick from you!!!