New Product Release from Daniel Defense!

BravoCompanyUSA · #1 08-08-06, 17:22

We are proud to announce that we made a special arrangement with Daniel Defense to make an exclusive purchase of the 10".

The 10" version is gaining significant popularity for going over a low profile gas block on a mid length gas system or carbine gas system.

These are some first pics of the Daniel Defense M4-10.0 rail. It is an amazing 11.2 oz!

Please pardon my picture taking abilities.

(The rifle pictured above is a BCM 11.5")

Thanks for looking!

molsen · #2 08-08-06, 19:00

Nice! What are the chances of a 10" DD Lite rail coming along?

SuicideHz · #3 08-08-06, 19:09

Nice! I noticed Troy started making 10s for this exact reason.

I'm glad to see DD doing this. I recently spoke with Jay over the phone and he's a very nice guy.

Cyclic240B · #4 08-08-06, 19:55

Cool release, but I am still waiting on an "M4 Rail" from DD in 13.0/13.5!

55Kingpin · #5 08-08-06, 20:14

Quote:

Originally Posted by molsen

Nice! What are the chances of a 10" DD Lite rail coming along?

I am also interested in the Lite rail version.

Also, I am wondering how this rail will work with a 12.5" barrel and a suppressor. I'm thinking about a Gemtech HALO, but I'm wondering about my other options with this rail and barrel combo.

ETA: I was also wondering how a 12.0 rail will work with a 12.5" barrel and a suppressor, especially which suppressors will work.

BravoCompanyUSA · #6 08-08-06, 20:59

The LITE rail verision is on the workbench. I finished it right before I left today. I try to get some pics tomorrow and post them.

Thanks!

BravoCompanyUSA · #7 08-08-06, 21:01

Quote:

Originally Posted by 55Kingpin

I am also interested in the Lite rail version.

Also, I am wondering how this rail will work with a 12.5" barrel and a suppressor. I'm thinking about a Gemtech HALO, but I'm wondering about my other options with this rail and barrel combo.

ETA: I was also wondering how a 12.0 rail will work with a 12.5" barrel and a suppressor, especially which suppressors will work.

Capn_Crunch or Bigbore might have some good info on the rail length doable with certain suppressors. I am just not sure.

rob_s · #8 08-08-06, 21:10

Anyone know what the weight of the 9.5 fsp is?

**M4arc** · #9 08-08-06, 21:12

You guys are killing me!

I'm still trying to scrap enough pennies together to buy a 7.0 Lite

CapnCrunch · #10 08-08-06, 22:17

I'll have to measure and see exactly what will work with a 10" when I get another rail in. Giff has one of my KAC's (his now), and another is about 2 counties away on a 12". The 12" is waiting on a SF FA556K last time I heard about it.

Just judging by the pics, you'll be, at the very least, able to run an M496D/G5. KAC M4QD, or an AAC M4-2K. SCARS-D with the Phantom should work, and the FA556K should work, but I can't say for sure as I don't have either on hand. It won't work with a SF M4FA or an OPS can, for obvious reasons.

Just to add something about the rail itself... 11.2 oz??? That's going to handle like a bat outta hell, or at least until you get the "Long Dot" on top of it

BravoCompanyUSA · #11 08-08-06, 22:39

Yup, 11.2oz . . . it is like a magic trick or something.

I will weigh the new AR15-LITE rail tomorrow, it is just a bit heavier - but only back at the barrel nut, so my guess is the feel and balance will be very similar.

JLM · #12 08-09-06, 02:20

MUR + 10" Rail + BCM 11.5....hellz jeah...

CapnCrunch · #13 08-09-06, 02:39

Justin, you read my mind like a book! I'll toss the SB on top, and have one screaming setup.

But then again, I might just stick the 10" M4 Rail on there with an Aimpoint/LT Mount and a set of Troy BUIS.

I'm still kinda undecided at this point