SHIVAN
03-23-12, 21:26
Yeah, I know Kimbers suck, they all break, etc, etc. Well this one is mostly stock - er not really. It's also been dead nuts reliable with all manner of ammo. I can't say the finish is perfect, as this was my go-to sidearm for training the past several years. I lost count at 3700 - 4200 rounds, recoil spring replaced a few times, might be due, but tension feels good still.
1) Essentially stock, internally, Kimber Warrior from some of the earlier days of this model. K1707xx serial. Three dot night sights, factory trigger but defensive carry "tuned" by Chuck Rogers. ~4.5lbs.
2) Golfball treatment and lower refinish done by Chuck Rogers, front strap and MSH. Front strap undercut slightly by Chuck Rogers. Left side ambi safety contoured by Larry Vickers for comfort, and refinished by Chuck Rogers during golfball work.
3) "Ranger Green" Simonich gunner grips AND Black gunner grips.
4) Thirteen (13) Chip McCormick Power 8rd mags
5) Five (5) Wilson Combat 8rd mags
6) Six (6) 10rd Chip McCormick Power mags
7) Black Sidearmor RH modular OWB holster w/o light with single mag carrier included.
8) Black Sidearmor RH modular OWB with X300
9) Black Safariland Black 6004-56 thigh plate with 6280-5340 for 1911 railed w/ X200
10) Black Safariland 6005-5340-808 for 1911 railed w/ x200
11) Black Safariland 6004-56-4304 holster; railed 1911 w/o light mounted to 6280 belt holster plate
12) Black Safariland 6004-5340-1008 railed 1911 w/ x200; single thigh strap
13) One (1) Eagle Industries "Ranger Green" 2x4 Molle; four 1911 mags in front, two AR15 mags in back - no flaps, they were cut off
14) Three (3) Eagle Industries MP1/M4-2/45-OT-MS-RG "1x2's"; two 1911 mags in front, one M4 mag in the rear, Molle attachment
15) One (1) Eagle Industries "Khaki" 2x4; as above, but with flaps intact
16) One (1) black Eagle Industries Duty Mag Pouch FB style; three 1911 mags. I think it was DMP-3-FB-45/220
17) One (1) olive drab Eagle Industries Duty Mag Pouch FB style; three 1911 mags. I think it was DMP-3-FB-45/220
18) Backwoods Leather (Portsmouth, VA) holster 45FS-R, pancake style, looks like Galco Combat Master
19) One (1) brown Bianchi 20A fit group 1, mag holder; holds one 1911 mag, metal clip for belt
20) One (1) black Desantis A47 (A47BJLLZ0); holds one 1911 mag, metal clip for belt
21) Three (3) olive drab Molle single mag pouches; unknown origin, maybe old Diamondback Tactical
I will snap some new pics tomorrow, but I think the price is pretty aggressive for everything you get. Not interested in parting it out, unless someone sends funds for the pistol itself, first.
$1500 + Shipping to your FFL - USPS Money Order only.
Your FFL must be willing to accept from a private citizen shipped via FedEx or UPS, or my FFL costs will add an additional $100 to the deal.
After coming back from Rogers Precision:
http://i235.photobucket.com/albums/ee192/SHIVAN308/Stuff/Warrior1.jpg
Surefire X200 not included, nor is the carpet...
Before going to Rogers Precision:
http://i235.photobucket.com/albums/ee192/SHIVAN308/Stuff/StockWarrior.jpg
Kydex is not nice to gun finishes, and this was certainly a useful tool. I'll entertain offers for the complete package, but if you start adding up new prices, custom work, lead times, etc I think you'll start to see the value in this package. The first picture has the flash washing out the imperfections in the finish, and the second one is an HD photo showing them in better contrast than shows in person.
The accessories add up quickly: 13 CMC Power Mags are ~$300, Safarilands are $400+, Sidearmors are ~$160, Eagle Ind. ~$160, Rogers Precision work ~$300 -- not including the Wilson mags, or pistol you've got ~$1000 in value.
Thanks for looking!!
Only trade interests would be, and keep in mind that I can get new Glocks pretty close to LE pricing:
Used G17 w/ night sights; Gen3 .... + Cash
Used G19 w/ night sights; Gen3 .... + Cash
Used G26 w/ night sights; Gen3 .... + Cash
1) Essentially stock, internally, Kimber Warrior from some of the earlier days of this model. K1707xx serial. Three dot night sights, factory trigger but defensive carry "tuned" by Chuck Rogers. ~4.5lbs.
2) Golfball treatment and lower refinish done by Chuck Rogers, front strap and MSH. Front strap undercut slightly by Chuck Rogers. Left side ambi safety contoured by Larry Vickers for comfort, and refinished by Chuck Rogers during golfball work.
3) "Ranger Green" Simonich gunner grips AND Black gunner grips.
4) Thirteen (13) Chip McCormick Power 8rd mags
5) Five (5) Wilson Combat 8rd mags
6) Six (6) 10rd Chip McCormick Power mags
7) Black Sidearmor RH modular OWB holster w/o light with single mag carrier included.
8) Black Sidearmor RH modular OWB with X300
9) Black Safariland Black 6004-56 thigh plate with 6280-5340 for 1911 railed w/ X200
10) Black Safariland 6005-5340-808 for 1911 railed w/ x200
11) Black Safariland 6004-56-4304 holster; railed 1911 w/o light mounted to 6280 belt holster plate
12) Black Safariland 6004-5340-1008 railed 1911 w/ x200; single thigh strap
13) One (1) Eagle Industries "Ranger Green" 2x4 Molle; four 1911 mags in front, two AR15 mags in back - no flaps, they were cut off
14) Three (3) Eagle Industries MP1/M4-2/45-OT-MS-RG "1x2's"; two 1911 mags in front, one M4 mag in the rear, Molle attachment
15) One (1) Eagle Industries "Khaki" 2x4; as above, but with flaps intact
16) One (1) black Eagle Industries Duty Mag Pouch FB style; three 1911 mags. I think it was DMP-3-FB-45/220
17) One (1) olive drab Eagle Industries Duty Mag Pouch FB style; three 1911 mags. I think it was DMP-3-FB-45/220
18) Backwoods Leather (Portsmouth, VA) holster 45FS-R, pancake style, looks like Galco Combat Master
19) One (1) brown Bianchi 20A fit group 1, mag holder; holds one 1911 mag, metal clip for belt
20) One (1) black Desantis A47 (A47BJLLZ0); holds one 1911 mag, metal clip for belt
21) Three (3) olive drab Molle single mag pouches; unknown origin, maybe old Diamondback Tactical
I will snap some new pics tomorrow, but I think the price is pretty aggressive for everything you get. Not interested in parting it out, unless someone sends funds for the pistol itself, first.
$1500 + Shipping to your FFL - USPS Money Order only.
Your FFL must be willing to accept from a private citizen shipped via FedEx or UPS, or my FFL costs will add an additional $100 to the deal.
After coming back from Rogers Precision:
http://i235.photobucket.com/albums/ee192/SHIVAN308/Stuff/Warrior1.jpg
Surefire X200 not included, nor is the carpet...
Before going to Rogers Precision:
http://i235.photobucket.com/albums/ee192/SHIVAN308/Stuff/StockWarrior.jpg
Kydex is not nice to gun finishes, and this was certainly a useful tool. I'll entertain offers for the complete package, but if you start adding up new prices, custom work, lead times, etc I think you'll start to see the value in this package. The first picture has the flash washing out the imperfections in the finish, and the second one is an HD photo showing them in better contrast than shows in person.
The accessories add up quickly: 13 CMC Power Mags are ~$300, Safarilands are $400+, Sidearmors are ~$160, Eagle Ind. ~$160, Rogers Precision work ~$300 -- not including the Wilson mags, or pistol you've got ~$1000 in value.
Thanks for looking!!
Only trade interests would be, and keep in mind that I can get new Glocks pretty close to LE pricing:
Used G17 w/ night sights; Gen3 .... + Cash
Used G19 w/ night sights; Gen3 .... + Cash
Used G26 w/ night sights; Gen3 .... + Cash