J.Boyette
01-01-08, 22:22
Went and shot this on Christmas eve and 200rnds down range and no issues.
Parts list:
Stag-15L Model 3L Pre-Ban Rifle with the Tri-Nozzle brake 1/9 factory barrel M4 contour
Daniel Defense 7.0 light hand guard with mod's
L-3 EOTech And GG&G Accucam Quick Detach Mounting System and GG&G Lens covers
Yankee Hill Machine Company EOTech .3 inch riser
MagPul CTR
JP Fire Control System with Speed Hammer and Over Size Pins tuned at JP Rifles trigger pull 4lbs crisp
Norgon Ambi Mag Catch
Ambi selector switch
GG&G MAD (Multiple Aperture Device) BUIS
GG&G Spring Actuated Flip Up Front Sight
Badger Ordnance Ambi charging handle
http://i4.photobucket.com/albums/y117/RED68C/64.jpg
http://i4.photobucket.com/albums/y117/RED68C/68.jpg
http://i4.photobucket.com/albums/y117/RED68C/71-1.jpg
http://i4.photobucket.com/albums/y117/RED68C/72.jpg
This system works but here is a small issue I found and was sent to Daniel Defense and Stag Arms at the beginning of this month. So I am not bashing at all. This is educational for us all to learn from ok.
This was a learning curve for me and the smith that did the work. The pictures at the time of being taken; the Stag lower was at JP Rifles getting there JP Fire Control System with Speed Hammer and Over Size Pins installed. So I a Armalite lower for picture taking only.
First off here is a Armalite 15A4CBA2 upper with a JP 16" Mid length BBL installed with a DD 9.0 light rail and my Stag-15L Model 3L Pre-Ban DD 7.0 rail side by side.
http://i4.photobucket.com/albums/y117/RED68C/13.jpg
http://i4.photobucket.com/albums/y117/RED68C/both.jpg
http://i4.photobucket.com/albums/y117/RED68C/upper.jpg
See the bolt at the 10 o'clock location?
http://i4.photobucket.com/albums/y117/RED68C/redline.jpg
This bolt had to be turned down in size so the Ejection Cover Hinge Pin has clearance for a proper fit and finish.
http://i4.photobucket.com/albums/y117/RED68C/nyhr.jpg
http://i4.photobucket.com/albums/y117/RED68C/noyhrred.jpg
This is a small issue but you must know this if these are the parts you need for your build.
Hope this helps some.
John
Parts list:
Stag-15L Model 3L Pre-Ban Rifle with the Tri-Nozzle brake 1/9 factory barrel M4 contour
Daniel Defense 7.0 light hand guard with mod's
L-3 EOTech And GG&G Accucam Quick Detach Mounting System and GG&G Lens covers
Yankee Hill Machine Company EOTech .3 inch riser
MagPul CTR
JP Fire Control System with Speed Hammer and Over Size Pins tuned at JP Rifles trigger pull 4lbs crisp
Norgon Ambi Mag Catch
Ambi selector switch
GG&G MAD (Multiple Aperture Device) BUIS
GG&G Spring Actuated Flip Up Front Sight
Badger Ordnance Ambi charging handle
http://i4.photobucket.com/albums/y117/RED68C/64.jpg
http://i4.photobucket.com/albums/y117/RED68C/68.jpg
http://i4.photobucket.com/albums/y117/RED68C/71-1.jpg
http://i4.photobucket.com/albums/y117/RED68C/72.jpg
This system works but here is a small issue I found and was sent to Daniel Defense and Stag Arms at the beginning of this month. So I am not bashing at all. This is educational for us all to learn from ok.
This was a learning curve for me and the smith that did the work. The pictures at the time of being taken; the Stag lower was at JP Rifles getting there JP Fire Control System with Speed Hammer and Over Size Pins installed. So I a Armalite lower for picture taking only.
First off here is a Armalite 15A4CBA2 upper with a JP 16" Mid length BBL installed with a DD 9.0 light rail and my Stag-15L Model 3L Pre-Ban DD 7.0 rail side by side.
http://i4.photobucket.com/albums/y117/RED68C/13.jpg
http://i4.photobucket.com/albums/y117/RED68C/both.jpg
http://i4.photobucket.com/albums/y117/RED68C/upper.jpg
See the bolt at the 10 o'clock location?
http://i4.photobucket.com/albums/y117/RED68C/redline.jpg
This bolt had to be turned down in size so the Ejection Cover Hinge Pin has clearance for a proper fit and finish.
http://i4.photobucket.com/albums/y117/RED68C/nyhr.jpg
http://i4.photobucket.com/albums/y117/RED68C/noyhrred.jpg
This is a small issue but you must know this if these are the parts you need for your build.
Hope this helps some.
John