TacMedic556
04-27-12, 16:55
One of the officers on our SRT team asked me to sell some personnel items for him, from his home gun. These are very gently used, well cared for and in good shape with very minor signs of use.
$110.00 Or Best Offer
LaRue Tactical EOTech QD Mount LT110 - Converts low-profile EOTechs to lower 1/3 cowitness, and provides a better cheekweld too.
The LT110 is another mount designed "by request". The LT110 raises the EOTech by .275". This extra height sticks the irons low in the EOTech's window...you can still see the irons if push-comes-to-shove.
The response has been outstanding. The extra height is just what the EO has been needing. The design had room for a piece-of-picatinny on the back, so we put it there and now you can mount a PVS-14 or Aimpoint 3X Magnifier in perfect co-witness.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding return to zero; the optic can be removed, and replaced, without loss of zero. Guaranteed.
Comes complete with QD adjustment wrench, spare ring screw, vial of blue Loctite and Instructions.
NOTE: The LT-110 EOTech Mount will work correctly with 511, 512, 551, 552, XPS-2, XPS-3 and similar models. It will NOT work with 516, 553 or 557 models (because they have a built-in riser).
http://www.laruetactical.com/sites/default/files/lt-110_small.jpg
$125.00 Or Best offer
LaRue Tactical PVS-14 Mount QD LT133-
Mount your PVS-14 directly to your EOTech LT110 mount
This QD mount takes advantage of the small rail behind the LT110 EOTech mount. CNC-machined from lightweight aluminum, this mount easily adapts a PVS-14 night vision monocular to be perfectly aligned behind the LT110-mounted EOTech.
The mount comes complete with replacement mounting screw and wrench, QD adjustment wrench, vial of blue Loctite and Instructions.
Helmet Mounting with the LT133
The LT133 can be used in conjunction with a helmet J-Mount, with minor alteration. You will need to remove a small radius of material with a Dremel, or X-Acto Knife, as shown in the photo below (LT114 shown). This alteration will not weaken the J-Mount, and will allow enough clearence to mount the J-Mount in proper position and allow the user to swap from helmet-mounted, to weapon-mounted operation.
http://www.laruetactical.com/sites/default/files/lt133-small.jpg
$200 for Both, paypal gift (no fees). PM for details etc.
$110.00 Or Best Offer
LaRue Tactical EOTech QD Mount LT110 - Converts low-profile EOTechs to lower 1/3 cowitness, and provides a better cheekweld too.
The LT110 is another mount designed "by request". The LT110 raises the EOTech by .275". This extra height sticks the irons low in the EOTech's window...you can still see the irons if push-comes-to-shove.
The response has been outstanding. The extra height is just what the EO has been needing. The design had room for a piece-of-picatinny on the back, so we put it there and now you can mount a PVS-14 or Aimpoint 3X Magnifier in perfect co-witness.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding return to zero; the optic can be removed, and replaced, without loss of zero. Guaranteed.
Comes complete with QD adjustment wrench, spare ring screw, vial of blue Loctite and Instructions.
NOTE: The LT-110 EOTech Mount will work correctly with 511, 512, 551, 552, XPS-2, XPS-3 and similar models. It will NOT work with 516, 553 or 557 models (because they have a built-in riser).
http://www.laruetactical.com/sites/default/files/lt-110_small.jpg
$125.00 Or Best offer
LaRue Tactical PVS-14 Mount QD LT133-
Mount your PVS-14 directly to your EOTech LT110 mount
This QD mount takes advantage of the small rail behind the LT110 EOTech mount. CNC-machined from lightweight aluminum, this mount easily adapts a PVS-14 night vision monocular to be perfectly aligned behind the LT110-mounted EOTech.
The mount comes complete with replacement mounting screw and wrench, QD adjustment wrench, vial of blue Loctite and Instructions.
Helmet Mounting with the LT133
The LT133 can be used in conjunction with a helmet J-Mount, with minor alteration. You will need to remove a small radius of material with a Dremel, or X-Acto Knife, as shown in the photo below (LT114 shown). This alteration will not weaken the J-Mount, and will allow enough clearence to mount the J-Mount in proper position and allow the user to swap from helmet-mounted, to weapon-mounted operation.
http://www.laruetactical.com/sites/default/files/lt133-small.jpg
$200 for Both, paypal gift (no fees). PM for details etc.