20 inch handguard

[S. Kelly]

I just got my BCM A2 lower to put my 20 inch BCM upper on. I need a 20 inch handguard. Who has them in stock? Thanks in advance.

[PrarieDog]

Are you looking for a free float or a standard two piece? What brand? Rails or not?

[Nightvisionary]

Brownells.

[E-man930]

I think a 20" handguard would be too long for a 20" barrel... perhaps if you had a 30" barrel, then a 20" handguard might work. Otherwise you probably should look at 12" handguards if you have a FSB and 12-15" handguards if you have a low profile gas block. Since you mentioned your upper is BCM and your lower is BCM, I would advise you buy your handguard from BCM.

[Kokopelli]

I really like the quality of these.. Ron

http://www.brownells.com/.aspx/pid=26340/avs|Manufacturer_1=CAVALRY%20MANUFACTURING,%20LLCxzzx/Product/AR-15-HANDGUARDS

[Moltke]

I think a 20" handguard would be too long for a 20" barrel... perhaps if you had a 30" barrel, then a 20" handguard might work. Otherwise you probably should look at 12" handguards if you have a FSB and 12-15" handguards if you have a low profile gas block. Since you mentioned your upper is BCM and your lower is BCM, I would advise you buy your handguard from BCM.

Dang, beat me to it.

[Rompnstomp]

If you find yourself close to Sioux Falls, SD, I have a set you can have.

[badness]

20 inch rail over and 20 inch barrel? Your muzzle will be inside the rail rather than protruding from it like its suppose to.

[Casull]

Well, if you're looking for the standard handguard for a 20" with a rifle length gas system then some good options have been presented. Also consider Magpul, however.

http://www.bravocompanyusa.com/Magpul-MOE-Rifle-Length-Handguard-BLACK-p/mag419%20blk.htm

They come in other colors also.

If you're wanting something more fancy please specify. If you're literally wanting a hand guard that is 20" long there aren't actually any. Needless to say, you wouldn't need one that's 20" long.

[Kokopelli]

Logic would suggest the OP just wants a handguard for a 20" upper.. If that's not the case, he'll probably let us know.. Must we peck everyone to death.. JMO.. Ron

[S. Kelly]

Yes, a handguard for a 20 inch upper, triangular endcap. Standard, not a Magpul.

[Hart]

Try Numrich

http://www.gunpartscorp.com/catalog/Products.aspx?catid=11071

M16 guards, used. You will need a triangular cap though to go with it.

[3 AE]

Yes, a handguard for a 20 inch upper. Standard, not a Magpul.

Look in the Sticky, "The Official Where Can I get It Thread". Will post a link with some good prices for Cavalry Arms furniture. Including a couple for 20" uppers.