Rockfish Dave
08-22-12, 18:36
GDI P-ROM L-Model (http://www.gdiengineering.com/store/products/p-rom-l-model-30mm.html)
Asking: $375.00
“P-ROM L-Model™ (Rifle Optic Mount) 30mm Ring Diam. I 25 MOA (P/N PRL3025)
Rifle Optic Mount for use with Telescopic Scopes. Adapter Kit available for Trijicon® RMR / Aimpoint® Micro / Insight® MRDS Red Dot Sights”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/PROM338-451x300.jpg
Valdada 30mm Medium Height - Heavy Duty Tactical Rings (http://www.valdada.com/mounts/rings/heavy-duty-tactical-30mm-rings-med)
Asking: $70.00 SOLD
“30MM HEAVY DUTY TACTICAL RINGS: Similar to Mk4 or Badger Ring design with four cap screws. These rings are .500" from base to bottom of ring curve.”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/hdtr-med.jpg
Vortex Cantilever Ring Mounts (http://swfa.com/Vortex-ADR-Cantilever-30mm-Ring-Mount-P47335.aspx)
Asking: $160.00
2" Offset
“The ADR cantilever mount is designed for mounting 30mm tubed telescopic sights onto a flattop style AR-15 rifle. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. This ADR mount will work best with scopes having four inches or less of eye relief (if more than four inches, use the ADR-X model).”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/opplanet-vortex-cantilever-mount-adr30.jpg
Troy Front Sight (http://troyind.com/back-up-iron-sights/folding/front-folding-black-fde)
Asking: $70.00 SOLD
“Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions. A push of a button folds the sights securely out of the way until you need them again (they fold to a profile of just 0.460). Troy BattleSights feature a zero-canting attachment system for use on all military and aftermarket receivers.
Durability and dead-on accuracy have made Troy Industries M4 Front Folding Sights the hands-down choice of Special Ops and tactical users worldwide.
Features
•No tools are required for adjustment
•Each click equals .50 MOA of adjustment
•Blackened Stainless Steel
•MIL-SPEC Type III Hard Coated
•T6 Aircraft Aluminum construction
•Available in Black and Flat Dark Earth
•Will not work on railed front gas block mounted lower than receiver height
•Made in the USA”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/Troy-BattleSight-Front-M4-Fold-5_355.jpg
Troy Rear Flip Up Sight (http://troyind.com/back-up-iron-sights/folding/rear-folding-black-fde)
Asking: $90.00 SOLD
“Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions. A push of a button folds the sights securely out of the way until you need them again (they fold to a profile of just 0.460). Troy BattleSights feature a zero-canting attachment system for use on all military and aftermarket receivers. Made in the U.S.A. *Lifetime limited warranty, see www.troyind.com for details. “
http://i120.photobucket.com/albums/o185/Rockfish_Dave/Troy-BattleSight-Rear-M4-Fold-5_355.jpg
LMT Front Sight (http://www.lmtstore.com/accessories/tactical-front-sight-assembly.html)
Asking: $30.00
“Designed to mount on a 1913-MIL-STD rail at the same height as the flat top receiver. Made by Lewis Machine and Tool.”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/lmt_front_backup_sight_2_.jpg
LMT Rear Sight (http://www.lmtstore.com/accessories/tactical-adjustable-rear-sight.html)
Asking: $100.00
“The LMT tactical adjustable rear sight offers a co-located sight picture to back up reflex sight systems. Forward and backward compatible with AR15, M4, M16-type weapons families. Robust design and removable to fit any Mil-Std 1913 rail. Adjustments match current M4-type operation both in function and capability.”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/lmt_rear_sight.jpg
Asking: $375.00
“P-ROM L-Model™ (Rifle Optic Mount) 30mm Ring Diam. I 25 MOA (P/N PRL3025)
Rifle Optic Mount for use with Telescopic Scopes. Adapter Kit available for Trijicon® RMR / Aimpoint® Micro / Insight® MRDS Red Dot Sights”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/PROM338-451x300.jpg
Valdada 30mm Medium Height - Heavy Duty Tactical Rings (http://www.valdada.com/mounts/rings/heavy-duty-tactical-30mm-rings-med)
Asking: $70.00 SOLD
“30MM HEAVY DUTY TACTICAL RINGS: Similar to Mk4 or Badger Ring design with four cap screws. These rings are .500" from base to bottom of ring curve.”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/hdtr-med.jpg
Vortex Cantilever Ring Mounts (http://swfa.com/Vortex-ADR-Cantilever-30mm-Ring-Mount-P47335.aspx)
Asking: $160.00
2" Offset
“The ADR cantilever mount is designed for mounting 30mm tubed telescopic sights onto a flattop style AR-15 rifle. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. This ADR mount will work best with scopes having four inches or less of eye relief (if more than four inches, use the ADR-X model).”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/opplanet-vortex-cantilever-mount-adr30.jpg
Troy Front Sight (http://troyind.com/back-up-iron-sights/folding/front-folding-black-fde)
Asking: $70.00 SOLD
“Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions. A push of a button folds the sights securely out of the way until you need them again (they fold to a profile of just 0.460). Troy BattleSights feature a zero-canting attachment system for use on all military and aftermarket receivers.
Durability and dead-on accuracy have made Troy Industries M4 Front Folding Sights the hands-down choice of Special Ops and tactical users worldwide.
Features
•No tools are required for adjustment
•Each click equals .50 MOA of adjustment
•Blackened Stainless Steel
•MIL-SPEC Type III Hard Coated
•T6 Aircraft Aluminum construction
•Available in Black and Flat Dark Earth
•Will not work on railed front gas block mounted lower than receiver height
•Made in the USA”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/Troy-BattleSight-Front-M4-Fold-5_355.jpg
Troy Rear Flip Up Sight (http://troyind.com/back-up-iron-sights/folding/rear-folding-black-fde)
Asking: $90.00 SOLD
“Durability and dead-on accuracy have made Troy Industries Folding BattleSights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions. A push of a button folds the sights securely out of the way until you need them again (they fold to a profile of just 0.460). Troy BattleSights feature a zero-canting attachment system for use on all military and aftermarket receivers. Made in the U.S.A. *Lifetime limited warranty, see www.troyind.com for details. “
http://i120.photobucket.com/albums/o185/Rockfish_Dave/Troy-BattleSight-Rear-M4-Fold-5_355.jpg
LMT Front Sight (http://www.lmtstore.com/accessories/tactical-front-sight-assembly.html)
Asking: $30.00
“Designed to mount on a 1913-MIL-STD rail at the same height as the flat top receiver. Made by Lewis Machine and Tool.”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/lmt_front_backup_sight_2_.jpg
LMT Rear Sight (http://www.lmtstore.com/accessories/tactical-adjustable-rear-sight.html)
Asking: $100.00
“The LMT tactical adjustable rear sight offers a co-located sight picture to back up reflex sight systems. Forward and backward compatible with AR15, M4, M16-type weapons families. Robust design and removable to fit any Mil-Std 1913 rail. Adjustments match current M4-type operation both in function and capability.”
http://i120.photobucket.com/albums/o185/Rockfish_Dave/lmt_rear_sight.jpg