Troy 13" on a 14.7" barrel?

[SW-Shooter]

Am I cutting it too close for a suppressor?

Does anyone have a Troy 13" on a 14.5" or 14.7" barreled upper?

If so would you please post pictures. If not will this set up work?

[wahoo95]

S&W has a M&P15 TS model that mates a 14.5" barrel with 13" Troy

[GTifosi]

14.7" w/perm'd spike's dynacomp (short), 13" vtac
OA bbl length 16.1"

https://www.m4carbine.net/attachment.php?attachmentid=11316&d=1330231355

[saddlerocker]

What suppressor?

You should have plenty of clearance, 1.2" if everything is the length its supposed to be.

You need less than 1/4" for most suppressors

[fallenromeo]

Here is my 14.5 w/13" Troy Alpha rail. I have the BC 1.5 on mine, you will obviously use a different comp or mount, but this should at least give you an idea as to how much clearance you will have.
http://i213.photobucket.com/albums/cc97/fallenromeo/IMG_2556.jpg

[Atg336]

http://i213.photobucket.com/albums/cc97/fallenromeo/IMG_2556.jpg


Sorry for the hijack, but what on earth are you growing in your fireplace? Tribles?

[MCS]

Looks like melted candles.

[ASH556]

Sorry for the hijack, but what on earth are you growing in your fireplace? Tribles?

http://t3.gstatic.com/images?q=tbn:ANd9GcSR_hjorsHkZXaBopBSgMhnn3hrgxRi-bT5dJPL6OAed_oY-mChsg

[fallenromeo]

Sorry for the hijack, but what on earth are you growing in your fireplace? Tribles?

WTF is a Trible?

I live in San Diego, rarely is it cold enough to warrant needing a fire. So my new wife decided she wanted to make it pretty. So what you see is a wooden candle holder with several candles on it and the stuff surrounding it is some potpourri shit my wife found at Michael's craft store. Sorry for the hijack OP.

[Atg336]

Am I cutting it too close for a suppressor?

Does anyone have a Troy 13" on a 14.5" or 14.7" barreled upper?

If so would you please post pictures. If not will this set up work?


When it's complete please post pics as I will most likely do the same with roughly the same set-up (might go with NSR instead of Troy). I'm worried about heat dissipation.

@fallenromeo: Season 2, Episode 15, the original series with Spock, Kirk, and Bones. Your wife is a very original thinker, I salute her for confounding me; happens very, VERY, rarely. Set up could use a little more color though.... like the tribbles :D

[Iraqgunz]

I agree. That is more than enough room unless you are running a Ruh-tard set up.


What suppressor?

You should have plenty of clearance, 1.2" if everything is the length its supposed to be.

You need less than 1/4" for most suppressors

[SW-Shooter]

YHM QD Stainless suppressor, not as high speed as others but the price was right and it suits my needs. I just wish YHM would allow others to make hosts for the suppressor.


I'm going to send it off to ADCO to have everything done.

[DeAdeYE15]

This is my 14.5" BCM with 13" Troy/VTAC TRX-E, I don't run a suppressor but I would think that any that don't cover the barrel at all would work fine.

http://i1169.photobucket.com/albums/r505/BCM_SHOOTER/BCMpic10.jpg?t=1346613772

[Tootsies]

Plenty of room
http://img829.imageshack.us/img829/7578/dsc06167c.jpg