Caduceus
09-22-12, 13:54
Currently I have a S&W M&P15OR ... w/ Midwest Industry front BUIS and a Matech rear BUIS, with an Eotech EXPS-1. This is my main gun, but I got to thinking, too many pieces to fail if things fall apart in society. Think of this as a BUG, or one for the wife if things really turn sour.
So, I made a second, slightly more basic model. Weighs in currently at 6.8lbs. Tried to keep it with as robust (and simple) as possible.
LMT upper - M4 profile, 1:7 barrel. Came w/o BCG, CH or rear sight.
I did swap out the rail for the basic M4 profile handguard.
LRB Lower - PSA internals
BCM Gen-2 charging handle
LMT FA bolt
Matech rear BUIS
ACOG TA-26r. There's a no-name mount underneath to give it a
1/3 cowitness, since the stock mounting point is absolute.
Waiting for my sling, some off-brand I find in the gun shows for $20 - it's a convertible 1&2 point sling.
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02350_zpsed7894e7.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02349a_zps238b4a14.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02351_zpsb2512bbb.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02355_zps4083397c.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02354_zpsbf0486fa.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02353_zps864b6031.jpg
I tried to show the reticle. As you can maybe see, the front site and the reticle do NOT overlap. It seems the rail on the upper is slightly unleveled, canted slightly to the left (ie, the side w/ the safety)
EDIT: Folks below discussing the mount. The following is the ACOG on a Larue mount - you can see how the reticle and FSP align. Better than the first riser I used.
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02364_zps2389de84.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02361_zpsc3a091e6.jpg
So, I made a second, slightly more basic model. Weighs in currently at 6.8lbs. Tried to keep it with as robust (and simple) as possible.
LMT upper - M4 profile, 1:7 barrel. Came w/o BCG, CH or rear sight.
I did swap out the rail for the basic M4 profile handguard.
LRB Lower - PSA internals
BCM Gen-2 charging handle
LMT FA bolt
Matech rear BUIS
ACOG TA-26r. There's a no-name mount underneath to give it a
1/3 cowitness, since the stock mounting point is absolute.
Waiting for my sling, some off-brand I find in the gun shows for $20 - it's a convertible 1&2 point sling.
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02350_zpsed7894e7.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02349a_zps238b4a14.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02351_zpsb2512bbb.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02355_zps4083397c.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02354_zpsbf0486fa.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02353_zps864b6031.jpg
I tried to show the reticle. As you can maybe see, the front site and the reticle do NOT overlap. It seems the rail on the upper is slightly unleveled, canted slightly to the left (ie, the side w/ the safety)
EDIT: Folks below discussing the mount. The following is the ACOG on a Larue mount - you can see how the reticle and FSP align. Better than the first riser I used.
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02364_zps2389de84.jpg
http://i256.photobucket.com/albums/hh196/Caduceusmd78/DSC02361_zpsc3a091e6.jpg