View Full Version : Brass Ejecting question
PowershipMC
09-03-06, 18:15
My SBR is ejecting brass forward to about the 1 o'clock position. Some times it throws it 6 inches, some times it throws it 2 feet. My other AR's eject brass towards the rear at about 4-5 o'clock.
Is this a sign that I need to perform maintenance on the bolt?
Robb Jensen
09-04-06, 02:51
If you've beefed up the extractor (Wolff extractor spring and/or installed a D-fender or Crane O-ring) and/or installed a heavier buffer or hydraulic buffer it will likely eject forward.
My 11.5" and 14.5" SBRs both eject forward, both have Enidine CAR buffers, Wolff extractor springs and Crane O-rings.
PowershipMC
09-04-06, 09:07
I've got heavy buffers in them all but my SBR is the only one that ejects forward.
Robb Jensen
09-04-06, 11:31
The slower you make it cycle (heavier/hydralic buffers) and the stronger you beef up the extraction the more and more it'll eject forward. It'll also not brass up the brass deflector much at all.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.