PDA

View Full Version : 2012 SHOT Show Threads



Pages : 1 [2] 3

KevinB
01-31-12, 10:01
All items are available for order now.

On the 10 5/8" Midlength Rail -- right now we are not sure which direction we will take on the next interation of that.
We have a gun on contract with the URXII so it is not being replaced at this time.

Dozer
01-31-12, 10:02
It looks like the top of this mount is railed? Will it fit a x300 on top? And any idea on price?


That is correct. It will fit the Surefire X300 on there as well. More information on the Magpul MOE Scout Mount can be found here.

ColdDeadHands
01-31-12, 11:35
All items are available for order now.

On the 10 5/8" Midlength Rail -- right now we are not sure which direction we will take on the next interation of that.
We have a gun on contract with the URXII so it is not being replaced at this time.

pm sent

BC98
01-31-12, 12:57
All items are available for order now.

On the 10 5/8" Midlength Rail -- right now we are not sure which direction we will take on the next interation of that.
We have a gun on contract with the URXII so it is not being replaced at this time.

Kevin,

Thanks for the heads-up on the midlength URX system. I was going to hold off until a III series came out but I think I'll pick up one of the URX II's for my SBR now.

bp7178
01-31-12, 13:11
KevinB,

Are the receiver extensions currently shipping on new rifles the grey Teflon LMT ones?

I also sent you an email to your work account with a few questions about a SR15 and a URX III.

jonconsiglio
01-31-12, 14:45
I'm hoping they discontinue the URX-IIs, and produce URX-III, and 3.1s exclusively.

Does anybody have any data on weather or not the URX 3.1 will be produced in 10 3/4''?...

Why in the world would you wish a quality product that many still use, and some most likely prefer, to be gone??

As for the rifles, that URX 3.1 and the 14.5" barrel look great. I'm curious if the 14.5" with the KAC-length gas system is going to be dependent on hotter ammo (which I'm fine with, just curious) or if will run everything reliably like both of my SR15's did.

I'd personally love to see a 14.5" with a carbine or mid length gas system with the ambi lower.

CoGT3
01-31-12, 14:51
I want my 16" PredatOBR already :dirol:

I want my suitcase rifle yesterday :dance3:

(with a 20" 'back-up' barrel)

Tzoid
01-31-12, 16:59
Does a Costa rifle mean they are HPT/MPI bolts and barrels and such?

I may have missed something because I don't follow Larue products terribly closely but I was under the impression they didn't test in this manner or at least did not in the past.

I'm sure if Chris is putting his name and logo on it that it would be good to go.

I personally feel that anything with LaRue on it lends itself to quality and slapping a Costa limited edition gun in the market with LaRue manufacturing it should be GTG because the MFG not the Costas name.

Mark LaRue to my knowlege has never produced a sub-par product and sold it to the masses.

Trunkmonkey4
01-31-12, 17:07
I saw the pricing for complete rifles on LF, but no talk on upper costs.

What would the 16inch and 11.5inch SR15 uppers cost? I know I will buy the 11.5 upper and I am debating between just getting the 16 upper or complete gun.

blasternank
01-31-12, 21:22
I need the handguard you have for the 870! The stock is iffy as I'm not sure about the looks of it but the handguard is great!

blasternank
01-31-12, 21:24
I like those rails! I like the different colors as well. Nice options

ggp2jz
01-31-12, 21:55
Any idea on a a release date for the 12"

DoctorTran
02-01-12, 03:45
SMGLee! Your absence on MP.net has been noticed. We seem to be missing some SHOT show pics from this year. Either way, great to see your stuff here!

BAC
02-01-12, 12:43
So still no PDW. :(


-B

TMS951
02-01-12, 15:26
I'm hoping they discontinue the URX-IIs, and produce URX-III, and 3.1s exclusively.

Does anybody have any data on weather or not the URX 3.1 will be produced in 10 3/4''?...

Why? It seems ignorant to want a perfectly good and useful product discontinued.

I understand your desire for the URX III and 3.1, but I do not see how the existence of the URX II would effect that.

On a side note is 0892 your month and year of birth?

joffe
02-01-12, 20:24
I take it the Bren Ten had quietly disappeared and was not mentioned.

Magic_Salad0892
02-01-12, 21:47
Why? It seems ignorant to want a perfectly good and useful product discontinued.

I understand your desire for the URX III and 3.1, but I do not see how the existence of the URX II would effect that.

On a side note is 0892 your month and year of birth?

A discontinuation would mean (more than likely) that they'd rise in value.

And no. It's not, because that would make me 19.

0892 is the day, and year my parents got married.

Month, and year of birth would make that 0687.

Shokr21
02-01-12, 22:06
Very cool photos, thanks for taking the time to take these and post them for us poor bastards who couldn't make the trip!

Jmacken37
02-01-12, 22:43
I'd buy it if they went a little shorter on the rail so people can use the HK folding front sight and sling loops.

Why they made a free float forend and then expect folks to mount their sights and sling to the bbl makes zero sense.

Jake

Shokr21
02-01-12, 23:19
Awesome photos! Thanks for sharing

armakraut
02-01-12, 23:30
Most of the new 416's I've seen are coming with the folding front sights instead of the original rail mounted ones.

Biggy
02-02-12, 00:03
The Daniel Defense rail mounted front sights are now starting to come through with the rear sight face serrated. They have also upgraded the clamping bolts on these sights (front and rear) to be stronger and have a larger OD to fit better in the rail slot so there is less movement before tightening.

http://i563.photobucket.com/albums/ss72/Biggy8/Picture165.jpg

MarkG
02-02-12, 07:30
Did FN roll-out an FNAR without a pistol grip? I heard the McMillan stock project was dead and they are doing a variant on their own.

Dave L.
02-02-12, 08:55
I'm also interested in that Mk 18 Flash Hider. Any info?

QuietShootr
02-02-12, 09:00
The Balista made it move a little bit.

SMGLee
02-02-12, 14:46
Please visit SIG Sauer (http://www.sigsauer.com/)

http://photos.imageevent.com/smglee/ss12/huge/P1090251.jpg
Finally a 551 Classic that actually resemble the original.

http://photos.imageevent.com/smglee/ss12/huge/P1090248.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090250.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090247.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090252.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090237.jpg
Also lower can be purchased separately from SIG USA, this effectively ending the radical price some places are charging for Original Swiss SIG, due to the Euro currency conversion.

http://photos.imageevent.com/smglee/ss12/huge/P1090245.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090246.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090256.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090254.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090265.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090266.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090264.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090221.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090282.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090283.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090284.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090285.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090286.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090287.jpg

SMGLee
02-02-12, 14:50
http://photos.imageevent.com/smglee/ss12/huge/P1090215.jpg
DI gas SIG 516

http://photos.imageevent.com/smglee/ss12/huge/P1090216.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090218.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090217.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090220.jpg
308 version of the SIG AR based piston wonder.

http://photos.imageevent.com/smglee/ss12/huge/P1090219.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090225.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090226.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090227.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090228.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090238.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090240.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090244.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090267.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090268.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090269.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090270.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090272.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090274.jpg

SMGLee
02-02-12, 14:53
http://photos.imageevent.com/smglee/ss12/huge/P1090275.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090276.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090277.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090278.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090279.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090280.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090281.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090229.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090230.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090231.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090232.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090233.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090235.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090257.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090258.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090259.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090260.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090262.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090263.jpg

96 SS
02-02-12, 15:33
Man that 229 Enhanced Elite looks like a sweet pistol. It's too bad that I just don't trust Sig QA.

SMGLee
02-02-12, 17:06
http://photos.imageevent.com/smglee/ss12/huge/P1090542.jpg
The new 3rd gen EOTech G33 3x magnifier

http://photos.imageevent.com/smglee/ss12/huge/P1090543.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090544.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090545.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090549.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090546.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090547.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090550.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090551.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090554.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090555.jpg
Comparing the new G33 against the last generation G23.

http://photos.imageevent.com/smglee/ss12/huge/P1090557.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090569.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090570.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090576.jpg
The mini red dot sight that beat out all comer for the USSOCOM solicitation. the MRDS.

http://photos.imageevent.com/smglee/ss12/huge/P1090583.jpg
The Anti-Zombie EOTech....

http://photos.imageevent.com/smglee/ss12/huge/P1090587.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090588.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090590.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090591.jpg
Custom reticle for those times you just need to shoot a few dead beats trolling the street.

SMGLee
02-02-12, 17:10
http://photos.imageevent.com/smglee/ss12/huge/P1090571.jpg
EOTech/Insight foray into the shotgun market, the new EOTech forened light.

http://photos.imageevent.com/smglee/ss12/huge/P1090572.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090582.jpg
for those SBR shotties, molded in hand stop.

http://photos.imageevent.com/smglee/ss12/huge/P1090560.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090562.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090564.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090566.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090648.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090649.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090650.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090646.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090647.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090652jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090653.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090654.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090655.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090658.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090659.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090660.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090661.jpg

SMGLee
02-02-12, 17:12
http://photos.imageevent.com/smglee/ss12/huge/P1090669.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090671.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090672.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090665.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090656.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090657.jpg

Spooky130
02-02-12, 17:30
Man that 229 Enhanced Elite looks like a sweet pistol. It's too bad that I just don't trust Sig QA.

I was thinking the same thing - today's style with yesterday's QC woul be awesome...

SMGLee
02-02-12, 17:46
http://photos.imageevent.com/smglee/ss12/huge/P1100080.jpg
Slightly late tot he game of 1-8x field, but this US Optics 1-8x scope could be the best of the field. with first focal plane etched reticle, and a second focal plane red dot. this has all the required spec to compete with the big boy but at a much lower cost. all said and done, a red dot ready 1-8X by US Optics will push the door at around 2400.00 retail. this is lower than Leupold and S&B.

http://photos.imageevent.com/smglee/ss12/huge/P1100081.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100082.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100078.jpg
The control knobs for the red dot, US Optics is working to make sure the red dot will be day light visible and still provide decent battery life.

http://photos.imageevent.com/smglee/ss12/huge/P1100076.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100077.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100079.jpg
A very slick reticle will be featured on 1-8x

http://photos.imageevent.com/smglee/ss12/huge/P1100086.jpg
1-8x vs. the 1-4x

http://photos.imageevent.com/smglee/ss12/huge/P1100084.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100087.jpg
1-4x in both standard and light weight.

http://photos.imageevent.com/smglee/ss12/huge/P1100088.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100073.jpg
Fixed 4x scope

http://photos.imageevent.com/smglee/ss12/huge/P1100074.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100075.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100092.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100091.jpg
\
http://photos.imageevent.com/smglee/ss12/huge/P1100091.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100089.jpg

mkmckinley
02-02-12, 19:20
What's the difference between the lightweight and regular 1-4's? Besides the weight of course. Any more info on the reticle?

Sensei
02-02-12, 19:33
OK. Now, I'm very interested. That 1-8X may solve my recent pains from the S&B recent price hike.

Have you heard about a projected release date and the types of reticles available?

ICANHITHIMMAN
02-02-12, 19:35
Whats the weight on the 1-8? My only hesitation is that I had an SN4 and its only draw back was weight. It was the most robust optic I ever owned.

SMGLee
02-02-12, 20:05
http://photos.imageevent.com/smglee/ss12/huge/P1090728.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090730.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090731.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090733.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090732.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090741.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090743.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090744.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090747.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090748.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090749.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090754.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090755.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090757.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090758.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090760.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090763.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090765.jpg

SMGLee
02-02-12, 20:09
http://photos.imageevent.com/smglee/ss12/huge/P1090769.jpg
Viking Tactics by Troy Ind.

http://photos.imageevent.com/smglee/ss12/huge/P1090770.jpg
Interesting VFG.

http://photos.imageevent.com/smglee/ss12/huge/P1090771.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090772.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090773.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090774.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090775.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090777.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090778.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090779.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090780.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090767.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090768.jpg

SteveL
02-02-12, 20:30
The VFGs look interesting. I might give one a try depending on the cost. I also want to try out the new squid grips they have coming out for the TRX Extreme rail.

loganp0916
02-02-12, 20:41
$90 for a vfg is a little steep for me but it does look very very interesting

SMGLee
02-02-12, 20:44
Please visit Colt Defense (http://www.colt.com/)

http://photos.imageevent.com/smglee/ss12/huge/P1090288.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090289.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090292.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090296.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090297.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090298.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090299.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090300.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090301.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090302.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090303.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090304.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090305.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090306.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090343.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090342.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090341.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090339.jpg

SMGLee
02-02-12, 20:49
http://photos.imageevent.com/smglee/ss12/huge/P1090329.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090330.jpg
Colt Competition rifle contract manufactured by BI in Idaho.

http://photos.imageevent.com/smglee/ss12/huge/P1090332.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090333.jpg
An adjustable gas port, user should close the gas port until the gun stop function, and then back off one click at a time until the gun functions, once that is determined, the user should open the port by two additional click to0 ensure the gun will function with all ammo type and condition.

http://photos.imageevent.com/smglee/ss12/huge/P1090336.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090326.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090323.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090320.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090324.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090317.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090314.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090313.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090312.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090311.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090310.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090308.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090307.jpg

SteveL
02-02-12, 20:56
$90 for a vfg is a little steep for me but it does look very very interesting

Then I won't be trying one out.

ICANHITHIMMAN
02-02-12, 21:01
Looking forward to this one, Lee check your links I'm excited.

SMGLee
02-02-12, 21:12
Doctor Tran, I have not had the opportunity to make it over to MP.net yet....:)


http://photos.imageevent.com/smglee/ss12/huge/P1090198.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090200.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090201.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090202.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090330.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090203.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090329.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090204.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090205.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090207.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090208.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090209.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090210.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090211.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090212.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090206.jpg

Hammer27
02-02-12, 21:21
Is Vltor going to release that AR buffer tube stock adapter for the SCAR or is it just a proof of concept thing?

SMGLee
02-02-12, 21:25
http://photos.imageevent.com/smglee/ss12/huge/P1090344.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090345.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090348.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090349.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090350.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090355.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090356.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090357.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090358.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090360.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090362.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090363.jpg

SMGLee
02-02-12, 21:37
http://photos.imageevent.com/smglee/ss12/huge/P1090384.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090383.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090385.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090386.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090387.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090388.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090389.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090390.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090391.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090392.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090393.jpg

eternal24k
02-02-12, 21:39
Is that Flash Hider a VTAC product?

SMGLee
02-02-12, 21:56
http://photos.imageevent.com/smglee/ss12/huge/P1090394.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090395.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090396.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090397.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090398.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090399.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090402.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090923.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090926.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090927.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090928.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090929.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090930.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090931.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090933.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090934.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090935.jpg

dirt_diver
02-02-12, 21:57
What does anyone think about that folding stock?

nml
02-03-12, 01:26
Looks like a turd. Lose compatibility with standard parts. Fantastic. I'm sure I'll see DHS guys walking around with them at the airport.

opmike
02-03-12, 04:12
Sig just loves sticking the shitty Chinese red dot to anything with a rail.

FChen17213
02-03-12, 06:44
Is Colt now going to ship some of their rifles with the DD Rails? I could be wrong, but I am assuming that those are DD Rails with the FSB cutout on the rifles near the top....sort of look like Omega X. The SP901s look good. I don't know anyone who likes the Rogers stocks yet.

SteveL
02-03-12, 08:21
What is this?

http://photos.imageevent.com/smglee/ss12/huge/P1090297.jpg

HighPockets
02-03-12, 08:52
What is this?

http://photos.imageevent.com/smglee/ss12/huge/P1090297.jpg

Ugly, I think.

militarymoron
02-03-12, 09:23
What is this?


it's the colt IAR.

bones
02-03-12, 11:46
Really digging the new rails! LMT still makes some of the nicest gear out there!



I agree

Freedoooom
02-03-12, 12:37
http://photos.imageevent.com/smglee/ss12/huge/P1090732.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090744.jpg

When those coming out?

LonghunterCO
02-03-12, 12:58
The Daniel Defense rail mounted front sights are now starting to come through with the rear sight face serrated. They have also upgraded the clamping bolts on these sights (front and rear) to be stronger and to fit better in the rail slot so there is less movement.

http://i563.photobucket.com/albums/ss72/Biggy8/Picture165.jpg

My DD 1.5 rear is rock solid I am not sure what they could do to tighten it up.

-Nice looking FS BTW.

SMGLee
02-03-12, 13:11
http://photos.imageevent.com/smglee/ss12/huge/P1090190.jpg
Both generation of the Beretta yet to be released ARX160.

http://photos.imageevent.com/smglee/ss12/huge/P1090174.jpg
the is the Gen 2(from my observation) of the ARX160.

http://photos.imageevent.com/smglee/ss12/huge/P1090189.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090188.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090186.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090180.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090181.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090184.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090183.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090182.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090180.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090177.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090176.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090162.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090163.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090164.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090165.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090166.jpg

FlyingAttackPorcupine
02-03-12, 13:20
The PDW was one of the main things at the show I was hoping to see but the rep I talked to pretty much said that it was not going to be made for civilians, LE, mil, nobody. Very disappointing. It seems like a promising platform that provides some incredible weight savings over the AR15 platform. A 16" or 14.5" version with 13" handguard in 5.56 or .300 blackout would be pretty slick.

Preach
02-03-12, 13:26
What is this?

http://photos.imageevent.com/smglee/ss12/huge/P1090297.jpg

Its the heat sink. I saw it on one vicker's shows when he checked out colt's latest offerings. It is their IAR, which lost out to HK.

SMGLee
02-03-12, 13:29
http://photos.imageevent.com/smglee/ss12/huge/P1090366.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090368.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090369.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090380.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090382.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090371.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090373.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090374.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090375.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090376.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090377.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090370.jpg

KevinB
02-03-12, 13:37
PDW was in the case with the SR635.

PDW is not dead, however we are looking at changing the design to be more economical to produce and allow for some other options.

Biggy
02-03-12, 13:45
My DD 1.5 rear is rock solid I am not sure what they could do to tighten it up.

-Nice looking FS BTW.

The new clamping bolts are larger in diameter and therefore the sight has less movement in the rail slot " before tightening down". The new style bolts can be purchased from DD individually if you feel the need.

SMGLee
02-03-12, 13:48
Please visit Blueforce Gear (http://www.blueforcegear.com/)

http://photos.imageevent.com/smglee/ss12/huge/P1090468_1.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090469.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090472.jpg
BFG introduce their line of general purpose pouches, small, med, and large.

http://photos.imageevent.com/smglee/ss12/huge/P1090473.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090471.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090475.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090474.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090476.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090477.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090478.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090470.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090481.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090479.jpg
BFG's new convertible sling, from one to two to three point, all in one wonder sling.

http://photos.imageevent.com/smglee/ss12/huge/P1090480.jpg

markm
02-03-12, 13:49
It's a rail fixin to give birth to a baby rail.

Colt has gone full cuckoo!

SMGLee
02-03-12, 13:50
http://photos.imageevent.com/smglee/ss12/huge/P1090482.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090483.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090484.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090485.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090487.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090486.jpg
Updated chest pouch with side MOLLE panels.

http://photos.imageevent.com/smglee/ss12/huge/P1090489.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090488.jpg

lethal dose
02-03-12, 14:00
man, bfg makes some SLAMMIN' gear.

SMGLee
02-03-12, 14:03
It is basically a 6940 Monolithic rail system with a heat shield finned heat sink lower handguard. you can easily detach IAR handguard and have a standard 6940 lower handguard install on it and get yourself a heavy barrel ultra accurate DMR.

SMGLee
02-03-12, 14:37
http://photos.imageevent.com/smglee/ss12/huge/P1090491.jpg
An alternative to the Troy MFR, the slimer OD free float rail is one of the new offering by MI this year.

http://photos.imageevent.com/smglee/ss12/huge/P1090492.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090493.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090494.jpg
Another very cool product from MI is the new modular tube handguard that is the trend of today's AR market.
Light weight and very well priced, this is probably the best bang for your buck free float tube handguard on the market.

http://photos.imageevent.com/smglee/ss12/huge/P1090499.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090498.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090496.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090495.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090502.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090505.jpg
Another offering by MI is the the modular handguard for your AK system. you can now mount rails at location of your desire.

http://photos.imageevent.com/smglee/ss12/huge/P1090509.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090510.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090512.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090506.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090528.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090530.jpg
Clip on handguard with extended rail section to mate with the upper receiver

http://photos.imageevent.com/smglee/ss12/huge/P1090526.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090527.jpg
Troy Ind Battelsight are probaly the standard for all BUIS ont eh market, but the MI SPLP BUIS are the product that can compete on the same playing field. the SPLP are low profile, easily deployed and lock in place. with a simpler adjustment for windage on the rear sight.

SMGLee
02-03-12, 14:51
http://photos.imageevent.com/smglee/ss12/huge/P1090514.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090516.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090518.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090519.jpg

Some of the American Defense Manufacture's very solid. repeat zero mount offerings
http://photos.imageevent.com/smglee/ss12/huge/P1090904.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090906jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090907.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090909.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090910.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090911.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090914.jpg
For your SCAR, if you want the same mount on your SCAR-L/H just like the same OEM mount on the SCAR-H SSR, you are in luck, co-developed with ADM, the FN SCAR-H SSR mount are now available as a individual purchase part from ADM.

http://photos.imageevent.com/smglee/ss12/huge/P1090916.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090521.jpg
BCM's new prototype pistol grip., the production version will have a more aggressive texture.

http://photos.imageevent.com/smglee/ss12/huge/P1090522.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090523.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090524.jpg

lethal dose
02-03-12, 15:06
lovin' that new midwest hg! very slick design!

thebob24
02-03-12, 15:46
PDW was in the case with the SR635.

PDW is not dead, however we are looking at changing the design to be more economical to produce and allow for some other options.

The PDW is awesome. I hope it never dies.
Personally I would want one in the caliber it was intended for with the 7" barrel.
The ability to swap to 300BLK would be killer, but then that means scaling the whole thing up a bit.

gamewarden
02-03-12, 16:52
I really liked there new Admin Pouch...very clean design. I also just picked up on of their Universal Wire Loop with push button socket to run on my SCAR 17...really looking forward to trying it out with my padded VCAS!

I use their 10 speed pouches on my carrier and have nothing but good things to say about them!

Blue Force Gear has become my one stop shop for pouches and slings.

SLAMMIN'!:cool:

SMGLee
02-03-12, 17:23
The new Czech 805 Bren
http://photos.imageevent.com/smglee/ss12/huge/P1090864.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090860.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090859.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090857.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090861.jpg


http://photos.imageevent.com/smglee/ss12/huge/P1090863.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090865.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090866.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090867.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090868.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090869.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090870.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090873.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090858.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090872.jpg

SMGLee
02-03-12, 17:26
New Scorpion SMG.....
http://photos.imageevent.com/smglee/ss12/huge/P1090848.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090849.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090850.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090851.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090852.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090853.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090854.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090855.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090856.jpg

SMGLee
02-03-12, 17:59
http://photos.imageevent.com/smglee/ss12/huge/P1090962.jpg
Interesting development at Armalite, Those that always wonder if they should buy a Armalite or DPMS, but find the DMPS magazines are more easily obtainable and you can also use it with P-Mag. but found the Armalite to be more reliable, more robust, and have a true forward assist....fear no more. the new Armalite 308 that will accept a KAC/P-Mag magazines. now you can have your cake and eat it too.

http://photos.imageevent.com/smglee/ss12/huge/P1090963.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090964.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090965.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090968.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090969.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090997.jpg
Mercedes Benz has their AMG, now Armalite is also offering the same type of service by providing custom spec'ed guns build entirely in the Premier shop.

http://photos.imageevent.com/smglee/ss12/huge/P1090971.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090975.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090980.jpg
Armalite's very own monlithic rail system is now offered in 308.

http://photos.imageevent.com/smglee/ss12/huge/P1090983.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090982.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090985.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090987.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090978.jpg
Compare to a standard AR10

http://photos.imageevent.com/smglee/ss12/huge/P1090990.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090989.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090991.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090998.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090999.jpg

SMGLee
02-03-12, 18:01
http://photos.imageevent.com/smglee/ss12/huge/P1090968.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090969.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090970.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090976.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100004.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090994.jpg

ICANHITHIMMAN
02-03-12, 18:02
It realy does not look that bad. Could use a little tweeking a rounding here and there, I would replace the stock.

SMGLee
02-03-12, 18:20
http://photos.imageevent.com/smglee/ss12/huge/P1090946.jpg
Leupold's 4000.00 1-8X24 CQBSS combat scope

http://photos.imageevent.com/smglee/ss12/huge/P1090947.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090955.jpg
1-8 vs 1-4

http://photos.imageevent.com/smglee/ss12/huge/P1090956.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090958.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090959.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090960.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090924.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090943.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090944.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090951.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090961.jpg

SMGLee
02-03-12, 20:16
Just a quick note, the improved stock of the ACR (lighter color, tougher material) is a retractable stock only, not folding.

The Remington ACR is much lighter now as Chen stated, and leaves the Bushmaster variant standing in terms of overall quality (no surprise). Remington reps are well aware that no-one wants the Bushmaster version (and yes, they hear it all the time *s*).

Hopefully in the not too distant future, time will tell.

you are correct, I was told those improvements are forthcoming to the folder as well.

As I have been told the Remington improvement to the ACR might trickle down to the Bushmaster version.

aslo I was told Remington might study a LE version of the Remington ACR in semi auto with 16" bbl as a patrol rifle, this might fall under the same category as the Remington 700 LE package, it is up to the Remington dealer to control the end users. So a Remington version of the ACR could still be a reality.

SMGLee
02-03-12, 20:24
Did anyone ask Mr. G when the handguards will be available in longer lengths (12"+)???

Thanks
Bryant

Rail in various length will be released, but they have to fulfill the military contract first before they can commit the production to supply the open market. we are looking at summer time frame

SMGLee
02-03-12, 20:27
I would like to know if HK is going to offer a HK416 upper to civilians, I remember hearing *something* about a new upper being sold, but maybe it's just a diffident configuration of the MR556.

YES...at my old age, I forgot the price and release date. but you are looking at an upper at about 2000.00




Apparently HK didn't get the memo....Skinny Jeans are the rage right now, those rifles look soooo heavy, the rails on the 416/417 rifles really have me scratching my head.

The G28 is very heavy, but being a sniper rifle, it is expected to be on the heavy side. after all it is not a carbine that you do room to room work with.

The 416/417 rail is actually not too heavy, it is extruded aluminium unit when you hold it in your hands, you can actually see how light it is.




SMG,

What kind of reticle did the Germans opt for in the 3-20x optic?

Sorry, i did not have that info handy, i will see if I can call some one

Operation Parts
02-03-12, 20:38
I saw the pricing for complete rifles on LF, but no talk on upper costs.

What would the 16inch and 11.5inch SR15 uppers cost? I know I will buy the 11.5 upper and I am debating between just getting the 16 upper or complete gun.


Here are a list of the new uppers that I have coming:

30394 - SR15E3 LPR Upper Reciever Assy $1750

30356 - SR15E3 SBR 11.5", flip up front sight/gas block, Carbine URX $1625

30357 - SR-15E3 SQB SBR Upper, 11.5", Mid-length URX II $1750

30355 - SR-15E3 SBR Carbine Upper, 14.5" dimpled barrel $1875

Prices are retail, selling price has not been finalized yet.

Quiet-Matt
02-03-12, 20:39
The Pontiac Aztek of the AR world...

http://photos.imageevent.com/smglee/ss12/huge/P1090312.jpg

SMGLee
02-03-12, 21:05
Please visit Accuracy International (http://www.accuracyinternational.com/) and Victor Company (http://www.victorcompanyusa.com/)


http://photos.imageevent.com/smglee/ss12/huge/P1090683.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090685.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090686.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090679.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090680.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090681.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090682.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090690.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090688.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090689.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090692.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090693.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090694.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090695.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090674.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090675.jpg
Accuracy International's new chassis cover, its an answer to the Victor Company's well designed and much herolded ViperSkin

http://photos.imageevent.com/smglee/ss12/huge/P1090676.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090677.jpg

SMGLee
02-03-12, 21:09
This is actually the Victor Company (http://www.victorcompanyusa.com/)'s ViperSkin, photo shot at the best steak house in Vegas, The Cut. great stock and great steak...

http://photos.imageevent.com/smglee/ss12/huge/P1100016.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100017.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100018.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100019.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100020.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100021.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100023.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100024.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100015.jpg

mike240
02-03-12, 22:15
Already a new one I think 807 with more ergo changes and features for the American market. I think it is the LE/Mil model and cannot speak for a semi version yet. Have not seen the 807 yet but invited to a test shoot....

Freedoooom
02-03-12, 23:32
Any info on the sight? Looks strange almost looked like at first it was a magnified sight with a EOTech instead of MRDS, but its too low for that...

HawaiianM4
02-04-12, 00:11
Thanks for the HK post. Was interested in the new HK.

BAC
02-04-12, 00:33
I would love the PDW in its original caliber. I would also love to see the 6x35mm in general take off; it's significantly more appealing to me than the Blackout. In fact, I'd be tickled shitless just to see a standard AR chambered in the round.


-B

JoshNC
02-04-12, 10:22
PDW is not dead, however we are looking at changing the design to be more economical to produce and allow for some other options.


I am glad to hear this and hope "other options" include 5.56x45 and 300 Blackout. Just PLEASE get around to offering the PDW commercially.

grunz
02-04-12, 14:22
Good to see how they revised the battle belt.

96 SS
02-04-12, 20:33
I really liked the new thin pouches etc. I wondered about the durability, but was told it is a non-issue.

I think I'm going to have to try some.

Trajan
02-04-12, 21:51
I really liked the new thin pouches etc. I wondered about the durability, but was told it is a non-issue.

I think I'm going to have to try some.

Larry talks about it in this video:
http://militarytimes.com/blogs/gearscout/2012/01/19/blue-force-gear-update/

Mr. Goodtimes
02-05-12, 00:37
so does that felony conversion for the P250 come with a complementary flight to club fed?

zibby43
02-05-12, 01:10
Why does everyone bitch and moan about Sig's quality control when more M&Ps have to go back to Smith & Wesson than Tylenol makes pills (and still countless forum members continue to buy M&Ps)?

If you buy a Sig, and it doesn't work the way you want it to, SEND IT BACK! Glocks aren't perfect, M&Ps aren't perfect. If you go with a tried and true P220, P226, P229, etc., odds are in your favor that it's going to be a good shooter.

P.S. This isn't directed at any individual in particular. It's really just getting old.

I mean really old. QC this and QC that. If you haven't purchased a new Sig and had a problem, I don't see the reason to bitch about QC. My M&P had a shit striker and shit barrel out of the box. I sent it back in and they fixed it. I'm not out bashing S&W QC, even though I clearly have a reason to.

Caveat: That red dot is shit.

Nmate
02-05-12, 06:36
The new KAC catalog has the 14.5" rifle weighing in at 6.89lbs while the 16" Mod 1 weighs in at 6.6lbs. Does anyone know why the shorter, ball-milled version is listing heavier? I wouldn't be surprised if they're running a heavier buffer in it, but I don't see that accounting for an ounce or two. Maybe a heavier barrel profile?

Nmate
02-05-12, 06:47
It probably has something to do with the utmost precision that SIG pistols used to be built to and the fact that they're generally more expensive than most others. It might also have something to do with the actual quality of SIG's customer service. I've heard they can be rather snippy.

At the end of the day, I can't really comment. The only SIG I've ever owned was a W. German roll stamped P226. I should have never sold it. I should have had it re-blued or Cerakoted and purchased new grips and sights for it. Hindsight in always 20-20.

I'd really like a 551, but the outrageous ($60-70) mag prices put me off. Maybe they'll come down.

96 SS
02-05-12, 08:05
It's really just getting old.

I mean really old. QC this and QC that. If you haven't purchased a new Sig and had a problem, I don't see the reason to bitch about QC.
Because I trust the word of others who have purchased more Sigs than any single person would in a lifetime, and have had to send the entire lot back.

It's not confidence inspiring when you know the track record.

JoshNC
02-05-12, 09:33
I'd really like a 551, but the outrageous ($60-70) mag prices put me off. Maybe they'll come down.

The can be purchased through Sig Sauer USA for about $38 each I believe. There is also a gent out of VA, Paragon Defense, who has lots of five mags for $206. The mags have come down in price.

As for Sig quality, Cohen has stripped away the quality control to the point that the current 556 lineup is more fit for airsoft than professional use. Take a look at the Swiss 553s in SMG Lee's photos. Notice the number of spot welds to the bolt guide rails, trunion, etc and compare that to the 556. The Swiss also furnace braze the components together. Sig USA uses thinner steel and very much slumps on the welds.

Precision manufacturing? Compare a Sig Sauer USA railed handguard to a Swiss model. See how much play there is in the Sig USA version and the Swiss locks up rock solid with no movement.

Look at the quality of accessories Sig USA continues to include with their rifles. It is patently ridiculous.

zibby43
02-05-12, 11:24
Because I trust the word of others who have purchased more Sigs than any single person would in a lifetime, and have had to send the entire lot back.

It's not confidence inspiring when you know the track record.

That's fine and all but whenever Sig's QC is brought up, it's always hearsay like this: "Well someone I know said . . ." Rare is the occasion where the particular individual complaining about QC can directly testify to the matter. I mean I trust you but you realize what you said is just kind of vague?

zibby43
02-05-12, 11:31
It probably has something to do with the utmost precision that SIG pistols used to be built to and the fact that they're generally more expensive than most others. It might also have something to do with the actual quality of SIG's customer service. I've heard they can be . . . snippy.

Glocks used to be known for their reliability prior to the Gen4. M&Ps have thrived on hype despite S&W's track record of producing the shittiest semi-auto handguns on the planet.

I'll stop my derailing of this thread by stating that there may very well be a QC problem with respect to the rifles - I've seen the problems first hand. Any complaints regarding the bread and butter pistols I believe are grossly exaggerated and the result of people parroting information they've heard on the Internet.

Nice photos SMG, thanks for posting.

E-man930
02-05-12, 14:10
It's a rail fixin to give birth to a baby rail.

Colt has gone full cuckoo!

You hit the nail on the head with this one; compare it to the H&K IAR entry and it leaves you scratching your head as to WTF Colt was thinking when they created that monstrosity... I don't think Colt has any accredited firearm engineers working for them.

S-1
02-05-12, 14:13
Because I trust the word of others who have purchased more Sigs than any single person would in a lifetime, and have had to send the entire lot back.

It's not confidence inspiring when you know the track record.

And the same could be said about EVERY brand. I agree that some things need to change at SIG, but the Classic P22X series is typically gtg. Again, the same can be said about every manufacturer. H&K needs to learn how to make a profit, S&W also needs to fix the plethora of problems that the M&P has had, and stop selling Chinese accessories like SIG, and Glock needs to fix the Gen4's and 3.5's.

All of that would happen if we lived in a perfect world.

zibby43
02-05-12, 14:20
And the same could be said about EVERY brand. I agree that some things need to change at SIG, but the Classic P22X series is typically gtg. Again, the same can be said about every manufacturer. H&K needs to learn how to make a profit, S&W also needs to fix the plethora of problems that the M&P has had, and stop selling Chinese accessories like SIG, and Glock needs to fix the Gen4's and 3.5's.

All of that would happen if we lived in a perfect world.

Thank God I'm not the only one who has witnessed the hypocrisy and seemingly blind regurgitation of information.

redsox20
02-05-12, 14:28
Is Vltor going to release that AR buffer tube stock adapter for the SCAR or is it just a proof of concept thing?

Mid-March 2012 for all there SCAR stuff. You can pre-order now.

patriot_man
02-05-12, 18:13
LOL @ the RIS II that's installed incorrectly. Hope they do it right from the factory and that it was just a small mistake.

mtdawg169
02-06-12, 00:17
I'm hoping they discontinue the URX-IIs, and produce URX-III, and 3.1s exclusively.

Does anybody have any data on weather or not the URX 3.1 will be produced in 10 3/4''?...

I don't get this line of thinking at all. The midlength urx II is a great rail and not in need of replacement. In fact, I think it would be a great mistake to discontinue the mid urx II. Not everyone has bought into the slick rail fad. While I like the URXIII on my SPR build, it limits your options depending on the rifle configuration.

96 SS
02-06-12, 09:09
Trust me when I tell you it's not blind regurgitation.

It's not for me to say who this person is - if they want to they can pipe up and say it publicly. It was told to me 1 on 1 - and as such will stay that way.


I trust the individual and that's enough for me. You can take it or leave it as you please.

Mr. Goodtimes
02-06-12, 09:17
I'm really hoping they make these in the 11in flavor for my 12.5 SBR. If they do, I'm sold on which rail I'll be using.

Tzook
02-06-12, 09:27
I like the R4 and the R5. I also like the removable grip on the new ACR.

I can't figure at all why they didn't do that right off the bat? The Scar and XCR and all these other rifles in the "non-ar" category all have them, don't they?

S-1
02-06-12, 13:12
Trust me when I tell you it's not blind regurgitation.

It's not for me to say who this person is - if they want to they can pipe up and say it publicly. It was told to me 1 on 1 - and as such will stay that way.

I trust the individual and that's enough for me. You can take it or leave it as you please.

Again, so what? As LAV just said in the "ask a SME" section, NO gun manufacture is perfect. They are all pumping out guns in record numbers and at times like this, a few more slip through the cracks.

I've seen waaay more Glocks and M&P's go down than SIG P22X series(new or old), but does that mirror everyone elses experience? No.

SMGLee
02-06-12, 17:44
Please visit First Spear (http://www.first-spear.com/home.php)

http://photos.imageevent.com/smglee/ss12/huge/P1090404.jpg
First Spear, the talk of the show. it is founded by Scott Carver of the Eagle Ind. fame. witness the 6/12 attachment design on this very lightweight plate carrier design.

http://photos.imageevent.com/smglee/ss12/huge/P1090406.jpg
Quick detach design for the operator to release the armor off his torso in a very speedy manner

http://photos.imageevent.com/smglee/ss12/huge/P1090407.jpg
The new 6/12 attachment design eliminate the need for PALS webbing and also the heavy MOLLE straps and snap buttons. this eliminate close to 50% of the weight from similiar plate carrier design with MOLLE attachment.

http://photos.imageevent.com/smglee/ss12/huge/P1090423.jpg
Also the lack of a thick MOLLE straps and snap buttons, the pouches are closer to the carrier then ever before.

http://photos.imageevent.com/smglee/ss12/huge/P1090425.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090408.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090409.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090410.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090411.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090412.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090416.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090419.jpg
First Spear's maritime design vest. this has a build in flotation device.

http://photos.imageevent.com/smglee/ss12/huge/P1090418.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090435.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090419.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090420.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090421.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090422.jpg

SMGLee
02-06-12, 17:48
http://photos.imageevent.com/smglee/ss12/huge/P1090428.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090429.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090430.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090431.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090432.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090433.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090413.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090436.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090437.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090441.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090439.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090449.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090448.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090445.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090446.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090443.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090444.jpg

SMGLee
02-06-12, 18:06
Please visit Eagle Industries (eagleindustries.com)

http://photos.imageevent.com/smglee/ss12/huge/P1090917.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090918.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100920.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100005.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100006.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100010.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100008.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100009.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100011.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100012.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100014.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100013.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100031.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090032.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090030.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090028.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090047.jpg

BaronFitz
02-06-12, 18:07
Mid-March 2012 for all there SCAR stuff. You can pre-order now.

Where can one pre-order? I don't see it on their website.

Still getting used to the look of the SCAR stock, but the integrated QD cup makes me want it, and if they solved the cheap rattly feel of the OEM stock, then I'm definitely in.

I think I'll reserve judgement on the rail until I get some idea of how easy it is to mount rail sections to. The length is nice though.

SMGLee
02-06-12, 18:20
This 500D light weight armor carrier is called the UAV (Urban Assault Vest) this is an evolution of the CIRAS in it is lighter, more modular and much more versatile. This vest has already been adapted by a major US agency in large deployment QTY.

http://photos.imageevent.com/smglee/ss12/huge/P1090053.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090054.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090058.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090048.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090049.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090065.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090064.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090062.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090061.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090060.jpg
Side armor pouch can also double as magazine pouch with a piece velcro conversion insert.

http://photos.imageevent.com/smglee/ss12/huge/P1090059.jpg
Various cummerbund for the vest, it is highly modualr for the user to modify the vest to fit any operational environment.

http://photos.imageevent.com/smglee/ss12/huge/P1090057.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090055.jpg
A separate velcro attachment can convert the LAND-CIRAS style to Maritime-CIRAS style closure.

http://photos.imageevent.com/smglee/ss12/huge/P1090054.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090052.jpg
Triple release on the vest, a pull down at the bottom, a neck pull and a side pull.

http://photos.imageevent.com/smglee/ss12/huge/P1090050.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090066.jpg
The pull strap are sewn half way down the vest to make sure a failure of the strap would never occur.

SMGLee
02-06-12, 18:25
http://photos.imageevent.com/smglee/ss12/huge/P1090043.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090046.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090941.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090040.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090039.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090038.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090037.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090036.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090033.jpg

SMGLee
02-06-12, 18:47
Ashbury Ord. (http://www.ashburyprecisionordnance.com/)


http://photos.imageevent.com/smglee/ss12/huge/P1100028.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100058.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100051.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100055.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100053.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100057.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100055.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100054.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100025.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100027.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100029.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100031.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100032.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100033.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100034.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100035.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100036.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100038.jpg

SMGLee
02-06-12, 18:50
http://photos.imageevent.com/smglee/ss12/huge/P1100039.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100040.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100042.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100043.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100048.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100049.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100065.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100062.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100070.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100067.jpg

redsox20
02-06-12, 18:52
Where can one pre-order? I don't see it on their website.

Still getting used to the look of the SCAR stock, but the integrated QD cup makes me want it, and if they solved the cheap rattly feel of the OEM stock, then I'm definitely in.

I think I'll reserve judgement on the rail until I get some idea of how easy it is to mount rail sections to. The length is nice though.

http://vltorstore.com/

Also SMGLee awesome photos as always.

SMGLee
02-06-12, 19:06
Please visit Crye Precision (http://www.cryeprecision.com/)

http://photos.imageevent.com/smglee/ss12/huge/P1100214.jpg
The cool new armor chassis from Crye, this is a marriage of the JPC and thre CPC. very slick and very well design.

http://photos.imageevent.com/smglee/ss12/huge/P1100215.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100216.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100221.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100230.jpg
Modular chest rig which can be convert to a plate carrier

http://photos.imageevent.com/smglee/ss12/huge/P1100229.jpg
Rear of the chest pouch

http://photos.imageevent.com/smglee/ss12/huge/P1100228.jpg
Chest pouch and plate carrier shares a common rear harness platform

http://photos.imageevent.com/smglee/ss12/huge/P1100226.jpg
Carrier mate to a Lvl3A soft armor

http://photos.imageevent.com/smglee/ss12/huge/P1100232.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100233.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100231.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100220.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100225.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100217.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100211.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100212.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100218.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100219.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100222.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100223.jpg

SMGLee
02-06-12, 19:07
http://photos.imageevent.com/smglee/ss12/huge/P1100213.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100243.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100244.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100242.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100241.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100240.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100238.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100237.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100236.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100234.jpg

KiraX105
02-06-12, 20:04
I'm sold on the K9 platform but its not on the website yet:mad:

SMGLee
02-06-12, 20:18
Please visit Lancer systems (http://www.lancer-systems.com/Small_Arms_2010.html)

http://photos.imageevent.com/smglee/ss12/huge/P1100355.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100354.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100342.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100343.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100344.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100338.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100341.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100351.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100350.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100349.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100346.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100345.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100344.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100356.jpg

SMGLee
02-06-12, 20:31
Please visit Diamondhead USA (http://www.diamondhead-usa.com/)


http://photos.imageevent.com/smglee/ss12/huge/P1100297.jpg
Diamondhead's free float rail system which does NOt require the removal of the delta ring assembly

http://photos.imageevent.com/smglee/ss12/huge/P1100296.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100292.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100307.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100308.jpg
Flip to side BUIS.....slickl!

http://photos.imageevent.com/smglee/ss12/huge/P1100299.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100300.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100301.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100313.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100311.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100304.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100303.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100302.jpg

krm375
02-07-12, 08:29
Those Crye Airlite carriers are very innovative, that and the S&S precision carrier are the way that the armor companies should be going. Lighter

skullworks
02-07-12, 12:01
Sir, no pics of the "Paper or Plastic" Tees? :D

d90king
02-07-12, 14:45
Thanks for all the work you do getting us all these pics and info. It is much appreciated.

By chance do you know if that new SF X400 will fit an HK45C? It appears to have a slightly shorter locking mechanism.

SMGLee
02-07-12, 14:56
http://photos.imageevent.com/smglee/ss12/huge/P1100272.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100259.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100260.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100261.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100262.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100263.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100253.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100254.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100255.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100250.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100251.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100256.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100257.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100258.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100266.jpg

Titleist
02-07-12, 14:58
Chen, just so I can interpret what I'm seeing, is that a dedicated side rail for 2001 cut helmets? As well as a multicam cover for 2001s?

If so...yay!

SMGLee
02-07-12, 14:58
http://photos.imageevent.com/smglee/ss12/huge/P1100264.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100265.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100270.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100271.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100245.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100248.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100247.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100246.jpg

SMGLee
02-07-12, 15:40
http://photos.imageevent.com/smglee/ss12/huge/P1100147.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100148.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100149.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100158.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100152.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100150.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100154.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100171.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100167.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100166.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100164.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090161.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100163.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100176.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100177.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100178.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100179.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100180.jpg

SMGLee
02-07-12, 15:52
http://photos.imageevent.com/smglee/ss12/huge/P1100188.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100185.jpg
This is what Wilcox specialize in, custom military work, on demand and in short time frame. This particular NVG mount unit was requested by an overseas customer to out fit their operators with a dual monocular mount. this mount can operate in single tube unit ot in conjunction with an additional tube to create a binocular unit. each NVD can independently flip up or down, can be adjusted to various eye angle. and a free floating magnetic rod are used to turn the unit on or off by fliping the NVD up or down.

http://photos.imageevent.com/smglee/ss12/huge/P1100184.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100183.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100190.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100191.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100182.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100192.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100193.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100200.jpg
Internal wiring helmet for all your electronic needs.

http://photos.imageevent.com/smglee/ss12/huge/P1100203.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100207.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100205.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100198.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100197.jpg
Word on the street, this Wilcox video recorder is the exact unit DevGrp used on the Bin Laden raid.

http://photos.imageevent.com/smglee/ss12/huge/P1100195.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100208.jpg

SMGLee
02-07-12, 15:53
http://photos.imageevent.com/smglee/ss12/huge/P1100175.jpg
Wilcox innovative desgin brings light weight to the war fighter, even the torch bottle was redesigned by Wilcox to reduce bulk and weight to help the operator reduce unwanted burden and stress.

http://photos.imageevent.com/smglee/ss12/huge/P1100174.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100173.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1100172.jpg

Kfgk14
02-07-12, 23:40
Forgive my ignorance, but what is this torch displayed in the last few pictures?

Allen
02-08-12, 01:34
I'm going to take a semi-WAG at this:
Green tubing usually means oxygen, or oxygen service equipment, no visible means of adding a second gas (ie. O2 mixed with MAP) leads me to say Wilcox made some one a very tiny (Tactical black)thermal lance setup:
http://en.wikipedia.org/wiki/Thermal_lance

Amron (http://www.amronintl.com/) the McMaster of things that go bang has them if you feel the need:
http://www.amronintl.com/broco-prime-cut-underwater-cutting-rods.html

Allen

DC3
02-08-12, 01:34
asalways great products!

DC3
02-08-12, 01:36
zombie stopper? hmmm cant wait to see those in the clearance isle

DC3
02-08-12, 01:39
SOD = Tacticool

Endur
02-08-12, 01:54
Man I would love to get my hands on some of those.. :happy:

EzGoingKev
02-08-12, 07:16
It is interesting how some of this stuff, like the cheek pieces for example, bring back things that were used in ancient times.

padkeemow
02-08-12, 11:00
It is interesting how some of this stuff, like the cheek pieces for example, bring back things that were used in ancient times.
Yeah, that helmet immediately made me think hoplite.

Boss Hogg
02-08-12, 16:54
When is the A2 stock going to be available, and MSRP?

Do you know the length? (Exactly the same as an A2?)

QuietShootr
02-08-12, 16:58
Now, how about a SCAR 17 PMAG?

And yes, it CAN be done, because people are modifying those POS Thermold FAL magazines by simply cutting a hole in the side for the mag catch. I know a PMAG is a much higher quality material than whatever Thermelts are made out of, so come on....quit it with the 'it doesn't work' and just make some.

FN said FAL mags couldn't be made to work either, and I have four that run great.

Dozer
02-08-12, 17:38
Now, how about a SCAR 17 PMAG?

And yes, it CAN be done, because people are modifying those POS Thermold FAL magazines by simply cutting a hole in the side for the mag catch. I know a PMAG is a much higher quality material than whatever Thermelts are made out of, so come on....quit it with the 'it doesn't work' and just make some.

FN said FAL mags couldn't be made to work either, and I have four that run great.

Well, since you asked nicely... ;)

ffusaf23
02-08-12, 18:24
I'll definitely try out those handstops.
Any pics of them mounted?

QuietShootr
02-08-12, 19:40
Well, since you asked nicely... ;)

Pretty please, with sugar on top. Make the frigging magazine!




:D

TehLlama
02-08-12, 22:38
Any information on availability, and models of helmet covers for the AirFrames?

Might resort to DIY, but I'd happily overpay for one direct from Crye

M4Guru
02-09-12, 06:43
Crye has been selling Airframe covers for almost a year for $50.

They only do the mesh one AFAIK.

http://www.cryeprecision.com/P-ACCHC502LG0/Airframe™-Helmet-Cover

NinjaMedic
02-09-12, 19:52
Thats Awesome! Guess its an exothermic setup according to a post on grey group's blog.

Allen
02-10-12, 15:01
http://www.wilcoxind.com/Mini-Cutting-Torch-Kit-P125C864.aspx
MSRP: $3,608.62 Please call for government pricing.
Ouch.
Demo:
http://community.greygrouptraining.com/2009/11/18/wilcox-handheld-exothermic-cutting-torch-demo.aspx

Was probably built because of this:
http://www.amronintl.com/broco-tactical-cutting-torch-kit.html
which looks enormous.
Allen

west996
02-11-12, 14:45
http://photos.imageevent.com/smglee/ss12/huge/P1090792.jpg


Any info on this flash hider?

Javelin
02-11-12, 14:50
I really like this. Did you get a chance to handle it SGM? I was wondering how heavy it feels.

http://photos.imageevent.com/smglee/ss12/huge/P1090788.jpg

SnakeX13D
02-11-12, 20:06
What is that newer face shield thing above the AirFrame helmet? Is that just an add on to a regular ACH helmet?

96 SS
02-11-12, 21:12
I was standing about 3 feet from LAV when they were filming that segment. :)

Anyway - not being a door kicker (and needing the actual customization of molle) I have always preferred preconfigured gear as it was always lighter than 1000D molle rigs etc.

With these new BFG mag pouches and carriers like the new Crye I could see the weight of a final product being less than half of an existing 1000d setup with realistically the same durability.

Very interesting indeed.

deadlyfire
02-12-12, 00:49
Would love a date and estimated price for the UDC.

blunter
02-12-12, 07:14
Yes, it is;

http://soldiersystems.net/2012/02/11/crye-precision-spartan/

Armati
02-12-12, 09:59
For years the Broco Torch was the industry standard in exothermic breaching torches. Other torches have pretty much only been for routine industrial use.

As one Master Breacher once told me 'you will only ever need a Broco 10% of the time. But it is usually the only solution when you actually need it.'

It is nice to see Wilcox is offering other options.

EzGoingKev
02-12-12, 16:14
I'm sure if Chris is putting his name and logo on it that it would be good to go.
To echo the sentiments of the poster above me, those products already had a name on them that meant they were good to go.

EzGoingKev
02-12-12, 16:32
http://photos.imageevent.com/smglee/ss12/huge/P1080034.jpg
Noveske's new rail. this rail is not a standard install piece, it will require it to be purchased as a upper or a hole drilled in the upper receiver to instll the anti rotation pin.

What is that bolted to the rail?

the_1iviper
02-12-12, 18:23
What is that bolted to the rail?

looks to be a barricade support

RD62
02-12-12, 18:47
If my previous post implied that Larue products were not GTG, that was not my intent.

I believe the machining of Larue products are also top notch.

That being said, a rifle of this type would certainly be used in the high round count, hard use environments in which parts that are tested in such a manner would be prefered.

Im not trying to start a pissing match over whether or not this testing is required or necessary. I only asked if this testing was now being conducted or not.

Mcbrian7
02-12-12, 20:53
LaRue is probably going to sell a metric shit ton of the Costa Ludas rifle! Not only does it look great I'm sure its collectability will go through the roof!! Their polymer stuff looks great as well!

Toally agree...this is most exciting item from Shot show in my opinion. I want one!

RyanB
02-12-12, 23:39
I certainly hope it isn't. A bolt that is made to the standard but not proof fired will outlast one that has been proof fired.

ViperRy
02-13-12, 19:00
Glad they finally came out with the triple m4 mag molle FB style attachment. The rover rig is pretty slick also, my dog will soon be tacticool.

TCBA_Joe
02-13-12, 19:33
Just realized they brought their website into 2012. Their old website was atrocious.

Kchen986
02-13-12, 22:47
Are those kydex inserts in the mag pouches?

ViperRy
02-13-12, 22:57
Looks like it. We'll see how long it takes to get these to the retailers... and in the color you're looking for.

Todd00000
02-14-12, 08:44
SGMLee thank you for all the hard work needed to make these post for us.

Todd00000
02-14-12, 08:55
Larry talks about it in this video:
http://militarytimes.com/blogs/gearscout/2012/01/19/blue-force-gear-update/

Good to know about this before my next deployment.

M4arc
02-14-12, 09:06
http://photos.imageevent.com/smglee/ss12/huge/P1090112.jpg
Costa join force with LaRue to produce the Costa Ludus Carbine

http://photos.imageevent.com/smglee/ss12/huge/P1090113.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090093.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090092.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090091.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090090.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090089.jpg

http://photos.imageevent.com/smglee/ss12/huge/P1090088.jpg



Wow, I really like that carbine! Not a big fan of LaRue as a company but I might need one of those :ph34r:

EzGoingKev
02-15-12, 04:53
looks to be a barricade support
OK thanks.

Are people using that? It looks a little to aggressive for me as it looks like it would chew up everything it came in contact with from your hand to your clothing while you had it slung in front of you.

Nmate
02-16-12, 19:10
Why the "death" date? I realize that AAC as we've come to know it is probably dead, but they're still in business.

RustedAce
02-17-12, 03:24
OK. Now, I'm very interested. That 1-8X may solve my recent pains from the S&B recent price hike.

Have you heard about a projected release date and the types of reticles available?

Very interested as well.

Failure2Stop
02-17-12, 10:25
OK thanks.

Are people using that? It looks a little to aggressive for me as it looks like it would chew up everything it came in contact with from your hand to your clothing while you had it slung in front of you.

It's a competition accessory.

infidelprodigy
02-17-12, 13:39
It's really for super tactical ninja extreme CQB gun grab defeating impact situations:p;)

Seriously though, interesting rail concept.....

EzGoingKev
02-17-12, 17:57
It's a competition accessory.

OK I understand now. I thought it was something for MIL/LEO to use when shooting out a window/door frame/over a barrier. My concern was that while it wasn't propped up against something it would just tear everything up.

Thanks for clearing that up.

Magic_Salad0892
02-21-12, 00:48
If they have a Mil Dot, or a BDC reticle on the 1-8 I might be in.

...

..

.Maybe.

ICANHITHIMMAN
02-21-12, 09:50
Would it not be sweet if they could do the 1-8 in the light weight package.

mig1nc
02-21-12, 10:59
Are we looking at a true 1x here?

Sent from my T7575 using Board Express

Magic_Salad0892
02-21-12, 16:36
I don't get this line of thinking at all. The midlength urx II is a great rail and not in need of replacement. In fact, I think it would be a great mistake to discontinue the mid urx II. Not everyone has bought into the slick rail fad. While I like the URXIII on my SPR build, it limits your options depending on the rifle configuration.

How so? You can add rails.

The Knuckle
02-22-12, 00:17
whats the story behind the "experimental suppressor" ?

bones
02-22-12, 13:22
Looks Good to me -where's the line start :)

Titleist
02-22-12, 13:26
I do hope they start engraving the U or S, or even Suppressed and Unsuppressed into the rails, so you can make sure you have the port selector on the right side.

I always forget which side it goes on and it usually ends up as the main frustration once I get to the range. So I appreciate that it's not engraved into the hybrid guns.

JoshNC
02-22-12, 20:30
I do hope they start engraving the U or S, or even Suppressed and Unsuppressed into the rails, so you can make sure you have the port selector on the right side.

I always forget which side it goes on and it usually ends up as the main frustration once I get to the range. So I appreciate that it's not engraved into the hybrid guns.

I just remember that the Left doesn't like sound suppressors and thus the port selector to the left is unsuppressed.

Titleist
02-22-12, 20:48
I just remember that the Left doesn't like sound suppressors and thus the port selector to the left is unsuppressed.

LEFT is LOUD?

oldskool65
02-22-12, 21:28
Agreed really looking forward to getting one of these hybrids hopefully will have the engraving which is a nice Larue detail ....what are your muzzle attachment choices

DocBach
02-25-12, 17:13
Would love a date and estimated price for the UDC.

It looks like the next step in evolution of the Urban Assaulters Vest, which Entrygear tactical has in Ranger Green.

tctlrld
02-26-12, 00:12
Does anyone know if the Mod 1 rifles (or uppers) are shipping yet?

RyanB
02-26-12, 02:21
I'd like to see a shortened AR receiver set with a purpose built polymer magazine for the 6x35. It would subsidize PDW magazines.

evil_nadman
02-26-12, 23:00
Any date on the MMAC? It seems like a pretty neat upgrade to what everyone else is offering...

cankicker01
02-27-12, 11:18
I have been looking into acquiring a .308 rifle this year and I am really turned in to the setup of the predatobr. Is there any news about a possible release date yet?

GlocksInMySocks
02-28-12, 15:20
Good lord I need one of the new SR7's...

BAC
03-01-12, 23:37
Anybody know the weight difference between the slick-railed version and the standard version?


-B

MikeCLeonard
03-02-12, 00:26
Anybody know the weight difference between the slick-railed version and the standard version?


-B

I've heard something like 3-4 ounces.

AggiePhil
03-02-12, 18:02
Lots of cool looking shit and I have no idea what most of it does. LOL

AggiePhil
03-02-12, 18:09
Tell me about that aftermarket brightness knob on the Aimpoint T-1.

mtdawg169
03-02-12, 19:38
How so? You can add rails.

Not yet you can't. And when add on rails become available, what will they cost? What will they weigh? How will they compare in profile to the standard rail? I can get the URX II or III for the same cost, so why spend the cash on additional rails? If you need the additional rail space, why not use a rail like the URX II to begin with? Personally, I would prefer not to have to worry about extra screws on the rails if I didn't have to. I'm not saying that the URX III is a bad rail, I own one on an SPR and it's a perfect fit for that rifle. I just think that there is room for both rails in the market and would hate to see the URX II discontinued due to the latest whims if the market.

mtdawg169
03-02-12, 19:41
Tell me about that aftermarket brightness knob on the Aimpoint T-1.

It's been around for a while now. Available from KAC, lawmens or any stocking dealer.

bigheadcal
03-06-12, 05:45
Love how they dropped the Blaser action into this beast


http://photos.imageevent.com/smglee/ss12/huge/P1090268.jpg

Thanks for the shot show coverage, Lee

Z71Silverado09
03-06-12, 07:41
suit case gun is pretty sweet

Z71Silverado09
03-06-12, 07:43
love CZ USA

Boss Hogg
03-06-12, 10:27
Amazing how the Skorpion has evolved! :p

I think the P-07 is the Rodney Dangerfield of pistols. It didn't get the hype of the new FN 9/40 pistols, but it is a GREAT pistol.

Grease Monkey
03-06-12, 12:03
Diggin' the BREN!

Apricotshot
03-07-12, 13:56
http://www.lmtstore.com/complete-weapon-systems-firearms-guns/5-56-modular-weapon-system.html

LM8's are on the Website now.

bigheadcal
03-07-12, 14:30
huge fan of LMT's products. Best in the Biz IMO

trinydex
03-08-12, 21:56
do the turrets lock on that 1-8x?

Greenbean
03-09-12, 21:52
zombie stopper? hmmm cant wait to see those in the clearance isle

Lol... I'de rock it for the right price!

warchild09
03-10-12, 20:35
Are some of those solid colored helmets supposed to the foliage green scheme or is that some other color?

Preliator
03-13-12, 19:44
Fantasic vest system. Very modular, fairly easy to adjust and comfortable! SMGLee, could you explain why one way of putting this together is "maritime" and the other is "land"

"A separate velcro attachment can convert the LAND-CIRAS style to Maritime-CIRAS style closure."

I have mine set up in the maritime manner, as it is easier to get it on and off - I see no advantage to the "land" set up.

Thanks for your time and excellent coverage of SHOT!!

RiggerGod
03-18-12, 01:20
SMGLee,
Any info word on the Sig 224? I was hoping to hear something about it coming from the show.

ETA: I've dealt with Sig customer service on numerous occasions for my agency and once for myself (Non-QC issue. A dealer sold me the wrong type of gun.) and I have nothing but good things to say about them. Prompt, courteous, and professional.

Personally I think that the P-Series design is a bit dated, WAY over priced, overly complicated, and generally a pain in my ass. (Give me a Glock any day!) However, I've never been let down my duty weapon.

patriot_man
03-19-12, 15:04
Looks like Eagle is stepping up their game... The last Eagle product I bought was back in '05. Now if they can start manufacturing civilian stuff in the USA again I'd be sold.

big 54r
03-19-12, 18:23
although I "Glock" know...I still keep my eye's on CZ.
I transitioned to the Glock solely for my wife and have found I like them...but I still have the CZ in me...carried one for years.

majette
03-23-12, 14:10
searched and did not see this anywhere on the forum and i don't have enough posts to post in GD.

colt lesocom (http://www.coltsmfg.com/Catalog/ColtRifles/ColtCarbinesI.aspx)

http://www.coltsmfg.com/LinkClick.aspx?fileticket=OBvxLVfR6yc%3d&tabid=194&mid=710

marked m4 carbine, knight's rail, and matech folding rear sight. 1 in 7 twist 16.1" m4 profile. only difference in this and the issue m4 is supposed to be the semi-only fire control and longer barrel.

kingfisher2
03-24-12, 01:02
Looking for more from colt, maybe in other than .223. round :D

kingfisher2
03-24-12, 01:04
Zombie...Really. Epic Fail!:confused:

kingfisher2
03-24-12, 01:08
Magpul has AWESOME products!

Javelin
03-24-12, 01:37
I like the novelty Zombie sight personally. Just because it is unique.

:haha:

patriot_man
03-25-12, 12:51
Any word on when the maritime helmet will be released for purchase?

Turnkey11
03-25-12, 23:35
Got a link for that MK20/SCAR ADM mount? I cant find it online for sale anywhere.

DGonz79
03-27-12, 00:18
Here are a list of the new uppers that I have coming:

30394 - SR15E3 LPR Upper Reciever Assy $1750

30356 - SR15E3 SBR 11.5", flip up front sight/gas block, Carbine URX $1625

30357 - SR-15E3 SQB SBR Upper, 11.5", Mid-length URX II $1750

30355 - SR-15E3 SBR Carbine Upper, 14.5" dimpled barrel $1875

Prices are retail, selling price has not been finalized yet.

Any idea when these will be available?

Operation Parts
03-27-12, 09:55
They are starting to ship, so far we have only had the 30356 - SR15E3 SBR 11.5", flip up front sight/gas block w/Carbine URX

I expect to see other models come in over the next month or so.

santi210
04-02-12, 11:01
Just thoughts I'd share an upper build that Charlie @ Operation parts did for me.

KAC URX 3.1
KAC sights
14.5 DD Lightweight Barrel
Surefire MB 556k pinned
DD upper and BCG

http://i104.photobucket.com/albums/m182/santi210/IMG_1494_tonemapped2.jpghttp://i104.photobucket.com/albums/m182/santi210/IMG_1486_tonemapped.jpg

JGO66
04-06-12, 16:33
wow G33 looks great,whats the price tag and release date?

MFWIC2
04-06-12, 21:37
Would like to pick up one of those forends with the handstop for my Wilson Combat 12" SBS.
The only ones I've seen available are the ones without the handstop.

a0cake
04-06-12, 21:46
For the guys hating on the Zombie reticle: There's more to L-3 / EOTECH than the holographic sights. Their thermal viewers / sights are top notch. The CNVD-T, in particular, is an amazing product given its size and weight. The MTM's are also quite useful for a certain niche. Very grateful to have been able to use these products; they've absolutely increased our effectiveness and survivability.

I could care less if they want to sell a few Zombie reticle EOTECH's to the fantasy land crowd, as long as they keep producing incredible gear for the task and market that really matters. If the silly Zombie stuff is going to help keep the company "in the black," and allow them to fund their R&D and production of more great gear (particularly their Thermal line), then I say bring on the Zombie Apocalypse.

Turnkey11
04-07-12, 00:38
Found my answer on TOS, figured Id post it here. $213 for black or tan, 30mm or 1".

http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_id=472

JGO66
04-09-12, 23:58
Colt has some very different designs going on

JGO66
04-10-12, 00:12
Don't know if it is happening but I've seen some of the uppers with the model "DDM4V5" or whatever engraved on it. Don't think it looks well on a real rifle, makes it look like some kind of airsoft gun.

plouffedaddy
04-11-12, 09:22
Any update as to when the 870 handguard will be out? I have a 870 Express Tactical that is patiently waiting for it :D

wild_wild_wes
04-14-12, 13:44
Wasn't DD supposed to come out with folding BUIS this year?

LEXUSF
04-16-12, 09:33
when will those magnifiers be out? looks smaller that the last one which i own. could use lighter weight and size

LEXUSF
04-16-12, 09:36
did they ever produce PDW to public? or at all?

Titleist
04-16-12, 09:40
did they ever produce PDW to public? or at all?

Not for civilians.

LEXUSF
04-16-12, 09:50
Not for civilians.

I sure would have liked having one!

CarlosDJackal
04-17-12, 15:17
They definitely make some eye appealing rifles...too bad a Maryland based company has very few dealers where we can actually handle the guns before we chunk down the coin.

I wonder why hardly anyone in MD sells LWRC Rifles??:confused:

Doesn't MD have an Assault Weapons Ban/Law like some of the other dumboKratic states?

kac
04-20-12, 00:19
Doesn't MD have an Assault Weapons Ban/Law like some of the other dumboKratic states?

Hey, CdJ,

MD has a list of guns it considers assault weapons. They are transferred like handguns here, meaning approval of you by the State Police and a waiting period is required.

jbo723
04-23-12, 21:41
LWRC definitely hit a home run with the ambi bolt catch/release. While I'll never give up any of my DI AR's, I will say that both my LWRC's have functioned 100% from day one.

thebob24
04-23-12, 23:37
LWRC definitely hit a home run with the ambi bolt catch/release. While I'll never give up any of my DI AR's, I will say that both my LWRC's have functioned 100% from day one.

I agree. Their lower looks like the best success for a truly ambi lower.
I'd rather stick with DI and keep things simple but their latest offerings are very tempting.
Is there any problem you've seen with carrier tilt in your LWRC's?

Thanks.

Stephen_H
04-26-12, 10:03
I agree. Their lower looks like the best success for a truly ambi lower.
I'd rather stick with DI and keep things simple but their latest offerings are very tempting.
Is there any problem you've seen with carrier tilt in your LWRC's?

Thanks.

I've been shooting LWRC's since 2006 (my first was a 10.5" 6.8mm SPC M6A2) and I've never seen an issue with carrier tilt. My 5.56mm M6A2 just hit 14K rounds last month and the only thing I've replaced is the piston return spring that broke at ~10K (gun was still functioning normally and I found the spring while cleaning the gun after a class).

Stephen

Jake0331
04-26-12, 22:13
Last year, didn't LWRC show an adjustable carbine stock that was really short? What happened with that?

thebob24
04-26-12, 22:44
Last year, didn't LWRC show an adjustable carbine stock that was really short? What happened with that?

It's not in any of the pics here but it is on their UCIW and 300BLK PSD.

trauma
05-01-12, 16:54
A few LM8's have hit dealers (gunbroker) and look to have the slanted slots on the top and bottom of the rail, yet their site has the shot show version with slots on top and holes on bottom ?????

Is there going to be 2 versions ???

cankicker01
05-05-12, 15:59
Any word yet on the availability of those new textured rail panel an handstop.

cankicker01
05-05-12, 22:48
My bad guys. I posted the above question in reference to the video Trey Knight did about their 2012 line. But if anybody knows what I am talking about and has any info it would be appreciated. I will drop a link to the video tomorrow.