View Full Version : Check out this BCG.
I knew Legalizing Marijuana would lead to extreme retardation.. :p
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326341005
I knew Legalizing Marijuana would lead to extreme retardation.. :p
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326341005
In a world where everybody seemingly wants to use the heaviest buffer they can reliably run along with a full auto carrier ......Why is a light mass bcm now desirable?
And yes.... That thing looks demented.
:eek:
Dimpled lowers on the horizon...heard it first here.
justin_247
01-18-13, 09:18
That low mass carrier with designed by Spike's specifically for their 3-gun rifles, and nothing else. They were trying a different approach than the one that JP Enterprises was following.
This is for competition rifles.
I knew Legalizing Marijuana would lead to extreme retardation.. :p
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326341005
Isn't that the BCG that spikes is advertising for their compressor rifle?
Isn't that the BCG that spikes is advertising for their compressor rifle?
I believe you are correct.
That low mass carrier with designed by Spike's specifically for their 3-gun rifles, and nothing else. They were trying a different approach than the one that JP Enterprises was following.
This is for competition rifles.
But where is the advantage? if heavy mass things like h2 buffers and full auto carriers "dampen felt recoil" and slow cycle rate, than wouldn't using low mass componants allow the bcg to be tossed around too violently/quikly creating a weapn that recoils violently and cycles fast enough to induce malfunctions? What about bolt bounce?
When you enter the competition gun realm. No amount of nonsense is too much.
That thing does not look structurally sound...
When you enter the competition gun realm. No amount of nonsense is too much.
You are 100% correct on that sir.
You are 100% correct on that sir.
I think the tight satin shirts cut off blood flow to their brains. :p
I think the tight satin shirts cut off blood flow to their brains. :p
Or these companies know if they modify an existing part and put nice wording behind it people who don't know any better will buy it.
As my five year old would say, "No thank you."
Robb Jensen
01-18-13, 09:43
I saw 3 of those on a prize table at a big 3gun match last summer so the seller is incorrect. There is some "out" in the public. IIRC the JP LMOS carrier is still lighter.
This BCG market is completely insane. Watching the prices mediocre BCGs are brining is gut wrenching...
Over 300 bucks for BCGs I wouldn't even use in a gun.
Funny that when making a, 'light weight' BCG they started with an auto carrier....
[QUOTE=markm;1510944]This BCG market is completely insane. Watching the prices mediocre BCGs are brining is gut wrenching...
Lower market is just as crazy...http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326265353
There's some nut with a RRA BCG with a start price of over $1000. :D
Colts are bringing around $400, and this goober wants $1100 and change for a RRA?
I knew Legalizing Marijuana would lead to extreme retardation.. :p
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326341005
I like how he says they may never be released, and he has never seen another one. I haven't either. Tell you anything? LOL!
Inkslinger
01-18-13, 10:27
It looks like the baffle in my '71 Bonneville exhaust pipe.
ColtSeavers
01-18-13, 10:34
Funny that when making a, 'light weight' BCG they started with an auto carrier....
Thank you! Was thinking the same thing!
http://i1051.photobucket.com/albums/s424/Rmillerm4/image-34_zps58ab9307.jpg
Is this think "Swiss" inspired?? Har har :p
All jokes aside..... Retarded is an understatement..... :rolleyes:
It says tactical so it has to be good!
It says tactical so it has to be good!
It'll probably sell for a silly price.
It'll probably sell for a silly price.
..... And you're right. It will sell for an outlandish amount.....
This BCG market is completely insane. Watching the prices mediocre BCGs are brining is gut wrenching...
Over 300 bucks for BCGs I wouldn't even use in a gun.
You should dig up all the BCM ones you buried in your backyard back in '08 then. :p
You should dig up all the BCM ones you buried in your backyard back in '08 then. :p
I just might!
This one is priced to move...
http://pics.gunbroker.com/GB/326489000/326489660/pix981710264.jpg
This BCG belongs in a gun with a Redundant Red Dot Sight :rolleyes:
This one is priced to move...]
Haha I'll take it!! $500 shipped sound good?
Haha I'll take it!! $500 shipped sound good?
That's our brilliant Government at work. There's "de milled" carry handles too.
theblackknight
01-18-13, 12:16
When you enter the competition gun realm. No amount of nonsense is too much.
For someone who dosent know much about comps, you wouldnt really be in a position to comment would you?
For someone who dosent know much about comps, you wouldnt really be in a position to comment would you?
I run several comps. I don't figure I'm a comp guru, but I've run BattleComp, Rainiers RMC, and am currently running a Z-comp.
I'm talking about all the silly springs and carrier gimmicks that maybe entirely appropriate for the competition realm... but newer AR shooters get tempted to start monkeying with that in a defense gun.
theblackknight
01-18-13, 12:41
:confused:
comps=competition. Like.. . . . what you said in what I quoted you.
Oh... I've gone out to the matches here to check em out. Not my thing. I'm more talking about the specific mods/gear in the ARs.
My point being that you don't want to model a tactical gun after something with a Tubbs flat wire spring and a bunch of JPenterprises stuff installed.
theblackknight
01-18-13, 13:12
I'm not seeing anything anywhere in this thread where someone is sugjesting they want to or have done that. In fact, the first couple posts made it clear this was for a competition rifle.
That Spike's BCG is "The Bomb"! That's the coolest, hottest, fastest BCG I've ever seen. Pair that up with a fully dimpled URG and a fully ported LRG, top it off with ported Pmags and I'm going to smoke the competition. I mean the grass! :jester:
I've been outbid on 26 BCGs or Carriers on Gunbroker over the last 4 days. :p
I need a carrier and am willing to pay up money....just not Tard money.
That Spike's BCG is "The Bomb"! That's the coolest, hottest, fastest BCG I've ever seen. Pair that up with a fully dimpled URG and a fully ported LRG, top it off with ported Pmags and I'm going to smoke the competition. I mean the grass! :jester:
You buy a carrier that bad ass, and you need a see through upper receiver to show it off! :cool:
I Don't blame the seller one bit. I'd be right there on gunbroker too if that thing landed in my hands through some misfortune.
ScatmanCrothers
01-18-13, 13:24
Small price to pay to be able to see the spider on your buffer through the ejection port :dirol:
Pretty soon they're going to start marketing dimpled triggers, magazines, buttstocks, and bullets.
It's ****ing disruptive brah!
:)
Small price to pay to be able to see the spider on your buffer through the ejection port :dirol:
Amen to that. And Dimple that buffer and action spring too!
That Spike's BCG is "The Bomb"! That's the coolest, hottest, fastest BCG I've ever seen. Pair that up with a fully dimpled URG and a fully ported LRG, top it off with ported Pmags and I'm going to smoke the competition. I mean the grass! :jester:
Well, they have fluted barrels, skeletonized triggers, and ventilated handguards already...
You buy a carrier that bad ass, and you need a see through upper receiver to show it off! :cool:
Make it out of polycarbonate... it may actually last a few hundred rounds!
Pretty soon they're going to start marketing dimpled triggers, magazines, buttstocks, and bullets.
See above comment for triggers. They could cut several vertical slots in the mags to reduce weight. How about "ventilated" buffer tubes? Bullets? They're called HP or OTM!!!
ScatmanCrothers
01-18-13, 14:13
It's ****ing disruptive brah!
:)
winner
Da boys at Spikes done gone full retard on this...you never go full retard!!!
Seriously, the extensive mods it would take to get a gun with that bolt to run would be ridiculous. I just don't see the point.
It's ****ing disruptive brah!
:)
hahaha
Hilarious
digitalpaladin
01-18-13, 16:29
Looks kind of like a my Toolcraft Inc. light weight carrier in my wife's featherweight pinned 14.5.
theblackknight
01-18-13, 16:29
It's ****ing disruptive brah!
:)
Yep this guy wins
sent from mah gun,using my sights
[QUOTE=markm;1510944]This BCG market is completely insane. Watching the prices mediocre BCGs are brining is gut wrenching...
Lower market is just as crazy...http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326265353
Notice that there are no bids on that lower. He can ask whatever he wants but there are only so many suckers.
[QUOTE=Airhasz;1510978]
Notice that there are no bids on that lower. He can ask whatever he wants but there are only so many suckers.
Yeah, somehow I don't see a ban on BCGs coming any time soon.. hi cap mags, lowers, and maybe an ammunition tax/registration. All part of the crazy panic buying. Glad I got what I needed for the most part before things got the way they are now.
The_Hammer_Man
01-18-13, 17:39
I've been outbid on 26 BCGs or Carriers on Gunbroker over the last 4 days. :p
I need a carrier and am willing to pay up money....just not Tard money.
Am in the same boat.. I have 6 uppers waiting on bcg's.. I'd pay a bit over the old cost but, double and triple the old ????
I'd rather have pissed off customers.
RogerinTPA
01-18-13, 18:55
Funny that when making a, 'light weight' BCG they started with an auto carrier....
I don't get that either. Why not use a half circle BCG and be done with it.
All I can say about that carrier is if you build it they will come. They being masses of un informed consumers. On the plus side think about how much magic monkey lube you could pack into those dimples! Wait? Do you even need to lube a BC that bad ass I am so confused.
Five_Point_Five_Six
01-19-13, 00:11
That's the worst thing I've seen posted on here since someone unintentionally dared me to google "Buck Angel" and "Dillon Press" in the same thread.
Can't unsee what has been seen.
That BCG belongs in this rifle shown in post #10. A match made in heaven! Just have to dimple the barrel.
https://www.m4carbine.net/showthread.php?t=116798
There's some nut with a RRA BCG with a start price of over $1000. :D
Colts are bringing around $400, and this goober wants $1100 and change for a RRA?
markm , stay off Gunbroker ...it'll make you crazy.
XM855LC1 AC1 420 RDS 62 grain 5.56 x 45
420 rounds on stripper clips in ammo can $460.00 w/ free shipping what a deal
markm , stay off Gunbroker ...it'll make you crazy.
I'm having fun bidding up stupid shit. :jester: I may have to sell of a bunch of stuff and replace it at half the price later.
markm , stay off Gunbroker ...it'll make you crazy.
XM855LC1 AC1 420 RDS 62 grain 5.56 x 45
420 rounds on stripper clips in ammo can $460.00 w/ free shipping what a deal
I see them going for $500 to $750 for that same ammo. Pure crazy. :jester:
NHbowhunter
01-19-13, 07:40
That's the worst thing I've seen posted on here since someone unintentionally dared me to google "Buck Angel" and "Dillon Press" in the same thread.
Can't unsee what has been seen.
Of course, I had to google it. Now my eyes are burning and I just threw up in my Cheerios...
Five_Point_Five_Six
01-19-13, 09:18
Of course, I had to google it. Now my eyes are burning and I just threw up in my Cheerios...
When someone says "Don't google it" it's like a triple-dog dare, I can't help myself and always regret it immediately afterwards.
Yeah...I had to google it too, luckily I got the gist of what was going on by the website description and went no further than the results page. On topic though the bcg is totally tactical guys...I want to get it for my panther. All the other operators have bcg's just like that now I can get one too! ;)
On the gunbroker thing I saw a case of m193 go for 1,000.00...
Funny that when making a, 'light weight' BCG they started with an auto carrier....
My first thought as well
That's the worst thing I've seen posted on here since someone unintentionally dared me to google "Buck Angel" and "Dillon Press" in the same thread.
Can't unsee what has been seen.
I hate all of you.
:bad:
I've been outbid on 37 BCGs on gunbroker. :p
I'm having fun helping fools overpay for parts.
Some nut has a NOVESKE BCG where the bidding is up to $450 and reserve has not yet been met. :sarcastic:
I hate all of you.
:bad:
Oh man... I did not need to see that...
Holy shit a monkey!
I've crossed a lot of shit off my "Stuff I need to Worry About" list. Now I'm gonna have to uncross "Steel Eating Termites".
TC
See markm.... The world is just moving too fast, and stuff is way too tactical for you to keep up. You can kill some mother****ers way more dead with a low mass bolt carrier group that looks like it was designed to look like children's playground equipment.
rubiconscott
01-23-13, 16:27
It's very aerodynamic, like a golf ball. They could call it a "jumpable" BCG and the mall ninja's would eat it up
Oh man... I did not need to see that...
Buck Angel...that is just...wow...that makes giant cheese taco almost look like a sunday afternoon picnic. I dont even......:blink:
I've been outbid on 37 BCGs on gunbroker. :p
I'm having fun helping fools overpay for parts.
Some nut has a NOVESKE BCG where the bidding is up to $450 and reserve has not yet been met. :sarcastic:
http://chicagogunsmith.com/catalog/images/DPMS-BCBA-T1AS.jpg
Word has it DPMS has renamed this the MarkM disruptor signature series BCG.
Dude I messed with one of those TiN carriers about 10 years ago. Gave it to a buddy who had an evap cooler in his house and the shit rusted like a mofo.
Five_Point_Five_Six
01-23-13, 22:21
I hate all of you.
:bad:
Oh man... I did not need to see that...
:sarcastic:
Leave it to someone to complicate a simple design into something much more difficult to fine tune. Must be a bitch to get the right spring and buffer combination to work.
Not really. Just weigh the BCG and make up for the mass with a properly weighted buffer. Run the usual spring. The advantage is, with a buffer made correctly, you get more damping
Magic_Salad0892
01-23-13, 23:20
That's the worst thing I've seen posted on here since someone unintentionally dared me to google "Buck Angel" and "Dillon Press" in the same thread.
Can't unsee what has been seen.
I know the guy who did Buck Angel's tattoos.
Damn, I don't believe I'd told that one...
I'm having fun helping fools overpay for parts.
You're doing The Lord's Work, man.
There's some part of me that says I should think this is wrong, but it's smaller and less vocal than the part that's 1) unsympathetic toward the Chicken Littles, and 2) thinks every man should have a hobby.
I've mastered the market. I bid early to create interest. I should get a commish from these damned sellers.
There's been a few times were I'm nervous thinking I'm about to be the proud owner of a 285 dollar BCM bolt group...
But like clockwork, the idiots show up and bid it to 375 or something ridiculous.:sarcastic:
(I won't bid on any LWRCi parts... If I accidentally won, I'd never hear the end of it.)
Check out this slap head...
I polished the ring surface on the center of the bolt to speed up the break-in as it was very stiff
New Bolt rings are stiff, you retard. Idiot polished the wrong area to correct a symptom that's not even a problem.
http://pics.gunbroker.com/GB/327155000/327155857/pix183457910.jpg
Check out this slap head...
New Bolt rings are stiff, you retard. Idiot polished the wrong area to correct a symptom that's not even a problem.
http://pics.gunbroker.com/GB/327155000/327155857/pix183457910.jpg
That is TOO FUNNY!!!!
Thanks for sharing.
As for the stupid prices people are paying: My brother went to the Crossroads gun show this last weekend and he refused to pay double the usual prices for ammo.....only to watch 2 guys behind him buy up as much as they could carry. :blink:......:rolleyes:
With ammo prices and AR parts going up like they are it reinforces my belief that the only things of value after the SHTF will be Gas, Guns, Ammo, Alcohol, Food & Water.
(I won't bid on any LWRCi parts... If I accidentally won, I'd never hear the end of it.)
No....no you wouldn't! :lol:
That is TOO FUNNY!!!!
Thanks for sharing.
As for the stupid prices people are paying: My brother went to the Crossroads gun show this last weekend and he refused to pay double the usual prices for ammo.....only to watch 2 guys behind him buy up as much as they could carry. :blink:......:rolleyes:
With ammo prices and AR parts going up like they are it reinforces my belief that the only things of value after the SHTF will be Gas, Guns, Ammo, Alcohol, Food & Water.
Yeah was that a cluster or what?! I was there for about 2 hours, and decided that was too much concentrated idiocy for me to handle in one morning. It is going to be funny IF the manufacturers get caught up with the ammo demand and prices drop.
Leave it to someone to complicate a simple design into something much more difficult to fine tune. Must be a bitch to get the right spring and buffer combination to work.
You guys need to embrace modern materials and technology. This BCG isn't the solution; we need a Carbon Fiber BCG with steel inserts for the gas key & rings and firing pin.
Carbon Fiber, bro... it will be damn near weightless - you won't even need a buffer!! AND, you could let TOS members design their own artwork and set that as the last ply so you get a "custom" BCG look with your own logo visible thru the dust cover. We'll use cloth and we can get that in different patterns and also with different color weaves (threads that hold the carbon fibers together) so instead of just a grey BCG, you can get one with red weaves, or green weaves. We should prob start with a custom red, white, blue cloth weave with a flag insert for the dust cover and also one with zombie green and a zombie for the dust cover area. It would be soo sweet brah. We can sell Zombie Killer kits with zombie green highlighted carbon fiber BCGs, zombie green handguards, pistol grips, trigger guards, and stocks. And an upgraded version with one of those corner shot prism things so you can shoot zombies around corners!!
:jester:
It's the wave of the future gents...
Magic_Salad0892
01-24-13, 09:44
Check out this slap head...
New Bolt rings are stiff, you retard. Idiot polished the wrong area to correct a symptom that's not even a problem.
http://pics.gunbroker.com/GB/327155000/327155857/pix183457910.jpg
That's awesome.
That's awesome.
Not only awesome. Priceless!
Here lets see if we can push this one over $500. We've got 9 hours....>GO!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326874403
Magic_Salad0892
01-24-13, 11:03
Not only awesome. Priceless!
Here lets see if we can push this one over $500. We've got 9 hours....>GO!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326874403
HOLY SHIT.
Not only awesome. Priceless!
Here lets see if we can push this one over $500. We've got 9 hours....>GO!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326874403
Wow... I pre-ordered a pair of these from Brownell's about a month ago for $160 apiece... I hope they ship soon... Maybe I can be a gouger too!!!! :D
That cardboard tube must demand more money. Because a friggin COLT just sold for barely over $300. :rolleyes:
Not only awesome. Priceless!
Here lets see if we can push this one over $500. We've got 9 hours....>GO!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326874403
Ha, sold for $652
This one is priced to move...
http://pics.gunbroker.com/GB/326489000/326489660/pix981710264.jpg
Wow, that's some nice staking on the gas key, wonder who the manufacturer is?
Five_Point_Five_Six
01-25-13, 06:38
Ha, sold for $652
I can neither confirm nor deny taking part in the up-bidding process. I think markm and I may have been battling it out at one point on GB.:sarcastic:
Wow, that's some nice staking on the gas key, wonder who the manufacturer is?
That's called a "field stake" it actually works well. It's an acceptable method for repair in the military.
I have one carrier that is staked like that. You actually get good fastener head contact from a meatier part of the key.
Not only awesome. Priceless!
Here lets see if we can push this one over $500. We've got 9 hours....>GO!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=326874403
You guys are horrible :sarcastic:
This whole time I'm reading about you guys running up prices on GB, I'm hearing George C. Scott's bit about Rommel in my head.
Ha, sold for $652
The word Epic is not really part of my vocabulary. But that certainly qualifies. Unreal.
sinlessorrow
01-25-13, 15:40
Isn't that the BCG that spikes is advertising for their compressor rifle?
You mean the rifle that all the Elite forces are now using like DEVGRU, SFOD-D, ICE, numerous SWAT agencies, Border patrol, ect?
thopkins22
01-25-13, 15:49
The DPMS for $285 has a rich description.
"You are bidding on a brand new M16 bolt carrier group. It does not have any commercial cut-aways, this is true and full mil-spec. DPMS is the manufacturer."
You mean the rifle that all the Elite forces are now using like DEVGRU, SFOD-D, ICE, numerous SWAT agencies, Border patrol, ect?
Please tell me that isn't what they are advertising.
sinlessorrow
01-25-13, 16:29
Please tell me that isn't what they are advertising.
OH yes it is.
badazzar15
Spike's Tactical
Industry Partner
Joined: May 2006
FL, USA
Posts: 21650
Feedback: 100% (238)
Link To This Post
Posted: 12/2/2011 7:06:08 PM
They will do well, we already sold 100's of Compressor's with MRS suppressors. The US Special Forces, ICE, Border Patrol, Secret Service, Australian Military, and about 30 different PD's and SWAT teams are doing or have already done T&E on the ST Compressor. Because of the success of the Compressor we decided to invest BIG $ in the suppressor project. We spared no expense when it came to anything. The sound meter alone was 5k. 2012 should be an interesting year. :-)
http://i203.photobucket.com/albums/aa273/SinlesSorrow/vulcan_logo_zpsdb3f95f5.jpg
HardLuck682
01-25-13, 18:25
This one is priced to move...
http://pics.gunbroker.com/GB/326489000/326489660/pix981710264.jpg
Check out that proper staking!
...sent from my mind, using telepathy!
Check out that proper staking!
...sent from my mind, using telepathy!
well that held up well. WTF happened there?
JBecker 72
01-25-13, 18:44
Looks like it was cut with a torch.
Sent from my PC36100 using Tapatalk 2
Boy I can't wait to see the carnage of when that comes apart! Say by by to a $4000 3 Gun rig!:haha: Oh thats right they probably use special light loads to help reduce recoil as well! :rolleyes:
It Was cut with a torch, its been de-milled. The military doesn't just throw some things in the recycle bin they make sure the item is un usable be for it goes in the trash.
Suwannee Tim
01-25-13, 19:35
Pretty soon they're going to start marketing dimpled triggers, magazines, buttocks, and bullets.
Dimpled buttocks?
Magic_Salad0892
01-25-13, 19:48
Dimpled buttocks?
Lmao. Great eye.
It Was cut with a torch, its been de-milled. The military doesn't just throw some things in the recycle bin they make sure the item is un usable be for it goes in the trash.
I had to get an entire 55 gallon drum of parts like this demilled once. When the AF converted our A1s to A2s the base I was at swapped out over a thousand chrome slick sided carriers to the black ones with FA cuts. We had to cut everyone of them up. I remember the TM called for more cuts than that I think. Very sad day.
It Was cut with a torch, its been de-milled. The military doesn't just throw some things in the recycle bin they make sure the item is un usable be for it goes in the trash.
this is probably the case
That's called a "field stake" it actually works well. It's an acceptable method for repair in the military.
I have one carrier that is staked like that. You actually get good fastener head contact from a meatier part of the key.
Might be enough to hold you until you can reach a MOACKS.
Coal Dragger
01-25-13, 23:21
I wouldn't mind a really light weight bolt carrier group in one of my AR's that has an adjustable gas block, but the carrier linked to by the OP doesn't look sound.
Coal Dragger
01-25-13, 23:31
Boy I can't wait to see the carnage of when that comes apart! Say by by to a $4000 3 Gun rig!:haha: Oh thats right they probably use special light loads to help reduce recoil as well! :rolleyes:
I have an AR that I re-barreled and it is more or less ending up looking a lot like a 3 gun rig. Running an adjustable gas block in conjunction with a non "H" marked buffer really makes the cycling nice and smooth with any load I have tried. I also put an utterly obnoxious Dreadnaught F2 compensator on it instead of a flash hider since my days of getting into gun fights at night ended when I returned from Iraq and got out of the Corps. Plus I have a Colt 6920 for serious social applications...
At any rate where light loads are concerned, it is my experience with that comp and maybe more dedicated 3 gunners can chime in here, that the hotter the load the better the comp works. It seems like the more gas I can get to it, the less muzzle movement I get. Frankly it makes me laugh like a lunatic every time I shoot that rifle because it can be run so hard, and just about never leave the target.
The noise is horrendous though, and I'm pretty sure the side blast could scour paint off of a wall. The upside is that even at up to 15X I can spot my own hits in the scope, which is really handy on coyotes.
That's because the muzzle brake is like a rocket engine- the more gas you put through it, the more thrust it makes
Coal Dragger
01-26-13, 00:51
Figured it was something along those lines.
MK 262 and equivalent reloads, both which seem to be on the hot side really run the comp well.
Weak sauce BHA 55gr remanufactured and even weaker Wolf 55gr seemed to have more muzzle movement.
Might be enough to hold you until you can reach a MOACKS.
Been doing small arms repair for the military for 20 years now. You will find hundreds of thousands of M16 series rifles with stakes like that well into the 50K rounds fired range without a hiccup.
Might be enough to hold you until you can reach a MOACKS.
It bend metal into the fastener head effectively. It looks odd, but is no less effective than lateral stakes.
Suwannee Tim
01-26-13, 09:18
That's because the muzzle brake is like a rocket engine- the more gas you put through it, the more thrust it makes
That is true. It is also true the higher pressure the gas the more thrust which is why muzzle brakes on guns like 458 SOCOM or 450 Bushmaster have little effect. By the time the bullet exits the muzzle the gas has expanded in the large bore to such an extent that it has relatively low pressure as compared to a 7.62 or a 5.56.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.