AR Gunsmith in Houston TX area (south side preferred)

[Frogracer]

AR Gunsmith in Houston TX area (south side preferred)
Looking for a reputable gun smith in the Houston TX area. Preferably south of I10.

Looking to have my DDM4-V2 stock rail removed and replaced with an Omega X rail. To do so I need to remove the FSB which is pinned.

Your help is much appreciated.

[Kenneth]

All you do is knock the pins out. Look up some You tube videos and do it yourself.

[thopkins22]

AR Gunsmith in Houston TX area (south side preferred)
Looking for a reputable gun smith in the Houston TX area. Preferably south of I10.

Looking to have my DDM4-V2 stock rail removed and replaced with an Omega X rail. To do so I need to remove the FSB which is pinned.

Your help is much appreciated.

Call Jen at Texas Tactical Gear. They're primarily a dealer and work on/assemble stuff you've bought from them, but I bet they'll do it for a fee. (281) 484-0800

She has the only place that I've found near town that I'd let touch my guns. There may be someone else that I don't know about...but Jen knows her stuff.

[matemike]

The Arms Room on 45 near clearlake/dickinson or SOG Armory near 59 and south beltway

but also suggest doing it yourself, there are many how to's and vids on the web

[Frogracer]

Thanks for the feedback. I will touch base with a couple of the shops recommended.

I have tried punching out the pins myself to no avail.

[LoboTBL]

Don't know if you've already gotten the work done but I was able to do mine myself. I used a plastic FSB doohickey from Brownells to support the FSB and had to give the pins a few good whacks to break loose. Not to insult your intelligence but keep in mind that those pins are tapered and only come out in one direction.

[randolph]

avoid SOG, they have a very bad reputation...

[TxPiKapp]

Carter's Country is right on i10 and do pretty good work..